Airhammer AN
With these air forging hammers we offer a wide range of technology that has been tried and tested for decades in heavy-duty construction from China.
AN-15 L airhammer
€8,064.00*
00667012
ram weight 15 kg
hit energy 0.16 kJ,
horiz. clearance 170 mm, free height of working area 160 mm,
number of strokes 300 strokes/min,
electric power 2.2 kW, three-phase 3 x 400 Volt,
total weight 500 kg,
length x width x height: 1180 x 650 x 1575 mm
equipped with 2 combination dies (top/bottom),
with motor-protection-switch and emergency-stop,
mounted on steel base.
serial no. #N
New / revised series of airhammers:
No insertion of the dies into the bear -> enables the installation of extra wide dies
increased projection of the C-frame -> larger working area
Higher anvil weight -> larger counterweight to the bear
AN-25 L airhammer
€10,490.00*
00667022
ram weight 25 kg
hit energy 0.27 kJ,
horiz. clearance 235 mm, free height of working area 240 mm,
number of strokes 250 strokes/min,
electric power 3,0 kW, three-phase 3 x 400 Volt,
total weight 1040 kg,
length x width x height: 1470 x 740 x 1835 mm
equipped with 2 combination dies (top/bottom),
with motor-protection-switch and emergency-stop,
mounted on steel base.
serial no. #N
New / revised series of airhammers:
No insertion of the dies into the bear -> enables the installation of extra wide dies
increased projection of the C-frame -> larger working area
Higher anvil weight -> larger counterweight to the bear
AN-40 L airhammer
€14,553.00*
00667042
ram weight 40 kg
hit energy 0.53 kJ,
horiz. clearance 270 mm, free height of working area 245 mm,
number of strokes 245 strokes/min,
electric power 4,0 kW, three-phase 3 x 400 Volt,
total weight 1300 kg,
length x width x height: 1650 x 800 x 1920 mm
equipped with 2 combination dies (top/bottom),
with motor-protection-switch and emergency-stop,
mounted on steel base.
serial no. #N
New / revised series of airhammers:
No insertion of the dies into the bear -> enables the installation of extra wide dies
increased projection of the C-frame -> larger working area
Higher anvil weight -> larger counterweight to the bear
AN-55 L airhammer
€19,835.00*
00667052
ram weight 55 kg
hit energy 0.7 kJ,
horiz. clearance 300 mm, free height of working area 270 mm,
number of strokes 230 strokes/min,
electric power 7,5 kW, three-phase 3 x 400 Volt,
total weight 1720 kg,
length x width x height: 1860 x 880 x 2100 mm
equipped with 2 combination dies (top/bottom),
with motor-protection-switch and emergency-stop,
mounted on steel base.
serial no. #N
New / revised series of airhammers:
No insertion of the dies into the bear -> enables the installation of extra wide dies
increased projection of the C-frame -> larger working area
Higher anvil weight -> larger counterweight to the bear
AN-75 L airhammer
€20,990.01*
00667072
ram weight 75 kg
hit energy 1,0 kJ,
horiz. clearance 330 mm, free height of working area 297 mm,
number of strokes 210 strokes/min,
electric power 7,5 kW, three-phase 3 x 400 Volt,
total weight 2800 kg,
length x width x height: 1620 x 930 x 2200 mm
equipped with 2 combination dies (top/bottom),
with motor-protection-switch and emergency-stop.
serial no. #N
New / revised series of airhammers:
No insertion of the dies into the bear -> enables the installation of extra wide dies
increased projection of the C-frame -> larger working area
Higher anvil weight -> larger counterweight to the bear