ram weight 15 kg hit energy 0.16 kJ, horiz. clearance 170 mm, free height of working area 160 mm, number of strokes 300 strokes/min, electric power 2.2 kW, three-phase 3 x 400 Volt, total weight 500 kg, length x width x height: 1180 x 650 x 1575 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

  ram weight 25 kg hit energy 0.27 kJ, horiz. clearance 235 mm, free height of working area 240 mm, number of strokes 250 strokes/min, electric power 3,0 kW, three-phase 3 x 400 Volt, total weight 1040 kg, length x width x height: 1470 x 740 x 1835 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

  ram weight 40 kg hit energy 0.53 kJ, horiz. clearance 270 mm, free height of working area 245 mm, number of strokes 245 strokes/min, electric power 4,0 kW, three-phase 3 x 400 Volt, total weight 1300 kg, length x width x height: 1650 x 800 x 1920 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

  ram weight 55 kg hit energy 0.7 kJ, horiz. clearance 300 mm, free height of working area 270 mm, number of strokes 230 strokes/min, electric power 7,5 kW, three-phase 3 x 400 Volt, total weight 1720 kg, length x width x height: 1860 x 880 x 2100 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

  ram weight 75 kg hit energy 1,0 kJ, horiz. clearance 330 mm, free height of working area 297 mm, number of strokes 210 strokes/min, electric power 7,5 kW, three-phase 3 x 400 Volt, total weight 2800 kg, length x width x height: 1620 x 930 x 2200 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear