Machinery

2 From 8
No results were found for the filter!
Recksattel konvex für Kuhn Sweep die (convex in length and width)
  no. 2205B, R=250/75 mmfor air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €431.00 *
Ballengesenk für Kuhn Round convex faced die for Kuhn
  no. 2206B, D=40 mm, R=75 mmfor air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €470.00 *
Kugelgesenk für Kuhn Round ball faced die
  no. 2207B, D=40 mmfor air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €470.00 *
Kehlgesenk für Kuhn Sharp cutting edge die for Kuhn
  no. 2208B, L=95 mmfor air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €440.00 *
Radiusgesenk für Kuhn Fullering die (radiused edge) for Kuhn
  no. 2209B, R=6 mmfor air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €440.00 *
Kombigesenk flach / kegelig für Kuhn Combination die flat/tapered for Kuhn
  with radius, no. 2210B, R= 18 mmfor air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €418.00 *
Recksattel ballig / kegelig für Kuhn Combination die convex/tapered for Kuhn
  with radius, no. 2211B, R=18/75 mmfor air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €418.00 *
Recksattel flach / ballig für Kuhn Combination die flat/convex for Kuhn
  no. 2212 B, R=75 mmfor air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €418.00 *
Meisselgesenk für Kuhn Chisel swage for Kuhn
  no. 2213/OB, 80  mmfor air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €695.00 *
Flossengesenk für Kuhn Forming die for "fish tail" for Kuhn
  custom size, no. 2216Bfor air hammer up to 40 kg ram weight, special steel with best abrasion resistance
From €877.00 *
Richtsatz für Kuhn Round die, flatter top for Kuhn
  no. 2219-1A, D=80 mmfor air hammer up to 40 kg ram weight, special steel with normal abrasion resistance
From €373.00 *
Hofi-Kombigesenk für Kuhn Hofi-combination die for Kuhn
  for Kuhn/Reiter air hammerssteel 1.2379 X155CrVMo12split face: fullering part 52 mm, drawing part 43 mm,total: length 95 mm, width 45 mm,...
From €418.00 *
Hofi-Krongesenk für Kuhn Hofi-crown die for Kuhn
  for Kuhn/Reiter air hammerssteel 1.2379 - X155CrVMo12, convex in both directions,total: length 95 mm, width 45 mm, hight 80 mm
From €404.00 *
Luftschlauch oben für K/CF22 upper flexible tube for K/CF22
  for Kuhn air hammer K/CF22inside diameter 3/4", 19 mm,length 370 mm
€35.70 *
Luftschlauch unten für K/CF22 lower flexible tube
for K/CF22for Kuhn air hammer K/CF22inside diameter 3/4", 19 mm,length 470 mm
€35.70 *
Satz Luftschlauch für K/CF40 und K/CF50 set of flexible tubes for K/CF40 and K/CF50
  1 piece length 300 mm (top),one piece length 450 mm (bottom)
€74.90 *
Luftschlauch oben für K/CF 40 und K/CF 50 upper flexible tube for K/CF40 and K/CF50
  Outer diameter ~ 36 mm, inner diameter ~ 25 mm,length ~ 300 mm
€35.00 *
Luftschlauch unten für K/CF 40 und K/CF 50 lower flexible tube for K/CF40 and K/CF50
  Outer diameter ~ 36 mm, inner diameter ~ 25 mm, length ~ 450 mm
€40.00 *
Luftschlauch oben für K/CF 65 upper flexible tube for K/CF 65
  inside diameter 5/4" (32 mm),length 300 mm
€45.90 *
Luftschlauch unten für K/CF 65 lower flexible tube for K/CF 65
  for Kuhn air hammer K/CF65inside diameter 5/4" (32 mm),length 500 mm
€47.60 *
2 From 8
Viewed