Blade support for hardening furnace made of 5mm stainless steel, suitable for 5 knife blades, approx. 110 mm wide, 50 mm high, 105 mm long   Characteristics: Suitable for blades from approx. 90 mm length Blade width up to approx. 9.5 mm Allows easy, space-saving hardening or storage of knife blades   * Delivery does not include the blades shown

  Connected load 1,9 kW, 230V/1-ph External dimensions (LxWxH) 510x375x580 mm, Combustion chamber (LxWxH) 300x100x100 mm   These electrically heated ovens are built especially for knife makers and blacksmiths by a small manufacturer in Italy. All devices listed here are operated with single-phase alternating current 230 volts, which means they can be used practically anywhere. The electric heating coils are visible in the combustion chamber, which means the ovens heat up very quickly. Insulation made of lightweight fire brick also ensures a moderate weight and thus shortens the heating time. All devices are equipped with a folding door and an integrated temperature controller. The application area of ​​these ovens is in the temperature range from 400 to 1200 °C (depending on the variant).   Features: easy to use folding door robust design temperature controller included fast heating time 230V/1-ph various variants   Your choice: 1) Which color: yellow, red, green, blue, orange, black?   2) Which max. temperature: 1100°C or 1200°C variant?   3) Which controller: Programmable or simple temperature controller? The target temperature is set on the "simple" controller. The oven heats up to the set temperature and maintains it until the oven is turned off. The programmable controller can run 4 different temperature ramps (target temperature, heating time, holding time) one after the other and is therefore important for complex hardening tasks and a reproducible result.

  Connected load 1,9 kW, 230V/1-ph External dimensions (LxWxH) 605x375x580 mm, Combustion chamber (LxWxH) 400x100x100 mm   These electrically heated ovens are built especially for knife makers and blacksmiths by a small manufacturer in Italy. All devices listed here are operated with single-phase alternating current 230 volts, which means they can be used practically anywhere. The electric heating coils are visible in the combustion chamber, which means the ovens heat up very quickly. Insulation made of lightweight fire brick also ensures a moderate weight and thus shortens the heating time. All devices are equipped with a folding door and an integrated temperature controller. The application area of ​​these ovens is in the temperature range from 400 to 1200 °C (depending on the variant).   Features: easy to use folding door robust design temperature controller included fast heating time 230V/1-ph various variants   Your choice: 1) Which color: yellow, red, green, blue, orange, black?   2) Which max. temperature: 1100°C or 1200°C variant?   3) Which controller: Programmable or simple temperature controller? The target temperature is set on the "simple" controller. The oven heats up to the set temperature and maintains it until the oven is turned off. The programmable controller can run 4 different temperature ramps (target temperature, heating time, holding time) one after the other and is therefore important for complex hardening tasks and a reproducible result.

  Connected load 2,2 kW, 230V/1-ph External dimensions (LxWxH) 755x375x580 mm, Combustion chamber (LxWxH) 550x100x100 mm   These electrically heated ovens are built especially for knife makers and blacksmiths by a small manufacturer in Italy. All devices listed here are operated with single-phase alternating current 230 volts, which means they can be used practically anywhere. The electric heating coils are visible in the combustion chamber, which means the ovens heat up very quickly. Insulation made of lightweight fire brick also ensures a moderate weight and thus shortens the heating time. All devices are equipped with a folding door and an integrated temperature controller. The application area of ​​these ovens is in the temperature range from 400 to 1200 °C (depending on the variant).   Features: easy to use folding door robust design temperature controller included fast heating time 230V/1-ph various variants   Your choice: 1) Which color: yellow, red, green, blue, orange, black?   2) Which max. temperature: 1100°C or 1200°C variant?   3) Which controller: Programmable or simple temperature controller? The target temperature is set on the "simple" controller. The oven heats up to the set temperature and maintains it until the oven is turned off. The programmable controller can run 4 different temperature ramps (target temperature, heating time, holding time) one after the other and is therefore important for complex hardening tasks and a reproducible result.

  Connected load 2,2 kW, 230V/1-ph External dimensions (LxWxH) 855x375x580 mm, Combustion chamber (LxWxH) 650x100x100 mm   These electrically heated ovens are built especially for knife makers and blacksmiths by a small manufacturer in Italy. All devices listed here are operated with single-phase alternating current 230 volts, which means they can be used practically anywhere. The electric heating coils are visible in the combustion chamber, which means the ovens heat up very quickly. Insulation made of lightweight fire brick also ensures a moderate weight and thus shortens the heating time. All devices are equipped with a folding door and an integrated temperature controller. The application area of ​​these ovens is in the temperature range from 400 to 1200 °C (depending on the variant).   Features: easy to use folding door robust design temperature controller included fast heating time 230V/1-ph various variants   Your choice: 1) Which color: yellow, red, green, blue, orange, black?   2) Which max. temperature: 1100°C or 1200°C variant?   3) Which controller: Programmable or simple temperature controller? The target temperature is set on the "simple" controller. The oven heats up to the set temperature and maintains it until the oven is turned off. The programmable controller can run 4 different temperature ramps (target temperature, heating time, holding time) one after the other and is therefore important for complex hardening tasks and a reproducible result.