height approx. 1400 mm diameters: top 50 mm, bottom 320 mm, flange diameter: 460 mm, of special cast iron, worked surface, weight approx. 140 kg

  for hole plate 350 x 350 mm for a working height of approx. 800 mm, made of strong angle iron.   Features: Secure hold of the perforated panel Ergonomic working height Panel can be positioned in various ways Proper stand in both horizontal and vertical positions Stable welded construction Very robust design Powder-coated finish Frame can be fixed to the floor Accessible with a pallet jack   The shown plate is not included in the price. We can also manufacture custom sizes or adjust the working height upon request.

  for hole plate 400 x 400 mm for a working height of approx. 800 mm, made of strong angle iron.   Features: Secure hold of the perforated panel Ergonomic working height Panel can be positioned in various ways Proper stand in both horizontal and vertical positions Stable welded construction Very robust design Powder-coated finish Frame can be fixed to the floor Accessible with a pallet jack   The shown plate is not included in the price. We can also manufacture custom sizes or adjust the working height upon request.

  for hole plate 600 x 250 mm, for a working height of approx. 800 mm, stable welded construction, accessible with a lift truck, allows the perforated plate to be rotated quickly and easily.   The swage hole plate shown in "gray" is not included in the scope of delivery and is sold separately.

  350 x 350 x 80 mm, 60 kg made of special cast iron, and radius at the sides, surface planed, with various round and square holes, for horizontal or vertical use,

  400 x 400 x 100 mm, 80 kg made of special cast iron, one surface planed, with various round and square holes, and radius at the sides, for horizontal or vertical use

  600 x 250 x 60 mm, 55 kg made of hardened special steel (three-layer), with various round and square holes, radius at the sides, for horizontal or vertical use.   Reimagined OurHole and swage plate is designed and implemented differently than the "ordinary" plates you know from blacksmithing workshops. Due to difficulties in sourcing materials, delivery and quality issues, and long foundry lead times, we came up with the idea of ​​a modular design for the perforated and die-casting plate.   Built to Last For this, in addition to modern production machinery, we use a highly wear-resistant and hardened steel that surpasses cast plates in terms of hardness and toughness. Thanks to the modular design, the main work surface can be easily replaced after many years of use and inevitable wear and tear.   Extensively Tested In cooperation with experienced blacksmiths and professionals, we extensively tested the perforated and die-casting plate in combination with the rotating frame, putting it through its paces and being completely satisfied.   Features: Hardened steel High abrasion resistance Very wear-resistant Stable construction Rotatable and flexible in use Usable on both sides Replaceable plates when worn Round, square, and rectangular holes Radius and square notches on the end faces   The perforated plate is supplied without a rotating stand, which is available as an optional accessory.   The transitions between the individual plate elements may be slightly noticeable, but this does not affect subsequent work.     TIP: Looking for a larger/smaller plate with custom or different hole shapes? Feel free to contact us; we'll be happy to provide you with a quote.

  dimension 790 x 1000 x 590 mm solid steel construction, powder-coated with several storage shelfs and magnet, with 2 rolls for easy moving in the workshop   Delivery without tools

  Stable mounting with round socket (approx. 44 mm diameter) for swivel bearing Complete with mounting screws

  length approx. 230 mm, diameter approx. 26 mm

  Length approx. 180 mm, outer Diametre approx. 50 mm

  for leg vice type Typ D 125/150 and BM 150/180/200 with ground plate for floor fixation, table top 260 x 450 mm

  length ~ 320 mm, width ~ 30 to 15 mm

  length ~ 190 mm, width ~ 28 mm

  length ~ 190 mm, width ~ 28 mm

  jaw width #Varinfo Span 150 mm, anvil area 40x40 mm, height 138 mm   Quality product, entirely drop forged from quality steel, jaws and anvil surface-hardened, robust, heavy construction with double trapezoidal thread and covered spindle. With inductively hardened pipe clamping jaws

  rugged drop forged quality, infinitely variable rotation 360° position lockable by special bolt screw

    Enables a stepless height adjustment of up to 240 mm for ergonomic work on the vice and a 360 ° rotation of the vice

  jaw width 40/60 mm, height 200 mm, Span approx. 60 mm, span depth approx. 40 mm, for workbench fixation.     Made for precision mechanics, knife makers, and much more.   Characteristics: compact design robust design 360° rotatable in two directions positionless rotatable Fast, tool-free fixation on the workbench quick-change jaws smooth jaws approx. 40 mm wide profiled jaws approx. 60 mm wide anvil on the back   This multifunctional vise enables 360° horizontal and vertical rotation and can therefore be fixed in any desired position. A quick and easy installation on surfaces with a thickness of up to 40 mm enables a quick readiness for use on different workbenches. Small objects can be straightened with the "anvil" or smaller rivets/pins can be hammered in. Due to its construction, the table vice is particularly suitable for small workpieces or sensitive surfaces.

Jaw for Mini Multi Vise #Varinfo Width approx. #Varinfo, thickness about 10 mm, Height approx. 18mm.     Replacement jaw for Mini Multi vice.