Total length approx. 45 cm   Extra-long, sturdy workshop version with coconut bristles

  Professional top quality Width #Varinfo   Very high paint absorption and release for ideal paint application and a perfect finish.   Top quality with new bristles Stainless steel clamp Hardwood handle, unpainted   Can be used for all paints: for solvent-based, opaque varnishes and paints for water-based, non-solvent-based lacquers and paints for glazes (non-covering paints) for railings, surfaces, facades, walls, ceilings, and much more ...

  wooden body, dimensions ~ 205x55 mm

  for fixing blades when grinding, Ensuring a perfect grinding angle, adjustable without tools approx. 200 mm total width.     This knife sharpening aid enables easy and repeatable grinding/sharpening of knives and blades. Made of aluminum, with sturdy die-cast hinges and freely adjustable angle from 0°-30°, any required blade angle can be adjusted. The flexible hole pattern also enables complex geometries to be clamped. Using knurled screws and quick releases, the grinding aid can be adapted to the geometry of the part to be ground without tools. Stable handles and special slideways on the underside enable a secure hold when sanding and easy gliding on the sanding table. With a width of approx. 200mm, small and large blades can be ideally fixed.   Features: quick, tool-free adjustment to the blade geometry flexible adjustment using hole grid/elongated holes secure fixation of the blade play-free adjustment and fixation Angle freely adjustable from 0°-30 made from aluminum Robust hinges made of die-cast perfect handling safe grinding side notches to check the angle   Dimensions: approx. 200 mm wide approx. 90 mm high approx. 120 mm depth   Notice: When sanding for the first time, the terminal strip may be slightly sanded down, which has no effect on its function. The blade shown is not included in the scope of delivery.

  with calibrated melting point, The marking melts when the temperature grade is reached, this change from a dry to a liquid state indicates the temperature.   Set with 5 pens, delivery according to customer specification.   The following temperatures [°C] are available: 79 - 204 - 316 - 400 - 482 - 650 - 680 - 760 - 774 - 816 - 843 - 871 - 900 - 1038 Please specify during ordering process, which temperatures you would like to order.

  water-based, air-drying high-temperature and pressure-proof dry lubricant film, Temperature range -35°C to +600°C/-31°F to +1112°F,   Features: High temperature resistance Very productive Easy punching Easy splitting Protects tools Reduces tool wear Reduces tool overheating   can be mixed with water in ratio of up to 1:5 Shake/stir well before use - protect against frost   Application: Simply apply Flutsch to a hole chisel or punch – this reduces friction and makes hole making significantly easier. If the tool gets too hot, the Flutsch will evaporate during application, and the graphite won't adhere optimally to the tool. In this case, allow the tool to cool briefly.   Non-toxic and even approved for use in the food industry!

Handbellow ø 20 cm, long ash wood, with leather total length approx. 60 cm   Our hand bellows are not a mass product. They are made in a small, traditional manufactory by hand.   All individual parts are made there and, last but not least, like 100 years ago, the leather is nailed to the wood by hand and the metal tip is attached to the head of the bellows.