Filling nipple (FN), M 10 x 1 male 400 g grease cartridge, DIN 1284, grease filling system or loose grease using a spatula   The grease gun for eternity!   Specification Filling nipple (FN), M 10 x 1 male Polybag, with headcard, for hanging display High pressure hose, M 10 x 1 male, 11 x 300 mm, with 4-claws-coupler, M 10 x 1 female   Special notes Operates with greases up to NLGI grade 2 at 20°C Plunger with exactly fitting when using bulk grease or cartridge Due to the flexibility of the push rod, the plunger can be inserted into damaged cartridges or cartridges not exactly matching the standard dimensions acc. to DIN 1283 TÜV - certified Pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication) No dummy (apparent) lubrication. Sealing system: O-ring and ball valve prevent grease compressed in the grease gun head from feeding back. Performance unchanged after 40.000 actuating cycles Separate filling and ventilation valves on grease gun head Grease gun head, zinc die casting Z 410 Sure grip handling due to deep band knurls Safe handle on the push rod Slip resistant handle on grease gun lever Enables even under extreme backpressure, a variable lubrication pressure with steady effort applied Allows lubrication in difficult to reach locations because the smallest lever operation results in grease being pumped reliably to the lubrication point. Plunger rod clamp on end cap enables manual pressure to be applied to spring to compress bulk grease, or to force in the plunger in damaged cartridges. Push rod can be locked in any position - push rod does not have to be fully retracted to release the spring pressure on the grease (grease does not saponify) High-speed ventilation, by half a rotation of the grease gun tube

  for hot open-die forging, approx. 21 t press force, stroke height 296 mm, stroke speed without load: 60 mm/s 13 mm/s working speed, worktable area 250 x 260 mm, motor power 2.2 kW, single-phase 230 V, total weight 500 kg (without oil filling), external dimensions (L x W x H): 790 mm x 800 mm x 1940 mm, included with one pair of combination dies as standard equipment   100% MADE in Spain   Features: Sturdy welded construction Robust guide rails: The table is supported by four chrome-plated columns Adjustable limit switches Manual and automatic mode: Two operating modes Plug & Play: The machine is delivered fully assembled and is ready for use immediately after connecting to the power supply. Low maintenance & quiet Tool change: Fast die changes in just 45 seconds. Flexible tools: Self-centering dies can be rotated 90°. A wide range of standard and custom dies is available.

  Nargesa offers a wide range of dies. Please contact us directly and we will provide you with a quote. Sold in pairs only.   100% MADE in Spain   Features: High-quality tool steel Hardened Various variants Base plates for DIY construction

  for hot-freeform-forging, 25 MPa (~ 25 t) press capacity, lift height 300 mm, lifting speed without load: down: 40 mm/s up: 60 mm/s 7 mm/s working speed, worktable 300 x 200 mm, motor power 4 kW, three-phase 3x400 V, total weight 880 kg (without oil), external dimension (LxWxH): 1200 mm x 750 mm x 2080 mm, basic equipment 1 pair flat dies (approx. 230x130x50 mm).   Serial number #N   Applications: damask free form forging punching, thorning,... flattening, upsetting,...   NEW: Setup mode with slow lifting speed! Easy to use via the second switch on the foot switch.   Advantages: stable steel welding construction of the press frame small required space free positioning end positions (with mm-scale for exact positioning) adjustable hydraulic pressure simple and exact control with foot pedal double-acting hydraulic cylinder high pressing speed large lift height significantly lower noise emission than power hammers quick and easy start up of the machine robust, durable and low ammount of maintenance flexible in use due to lateral insertion (80mm x 180mm) easy and flexible die mounting with T-slots on the press table

  for hot-freeform-forging, 50 MPa (~ 50 t) press capacity, lift height 300 mm, lifting speed without load: down: 50 mm/s, up: 55 mm/s 8 mm/s working speed, worktable 380 x 300 mm, motor power 7,5 kW, three-phase 3x400 V, total weight 1950 kg (without oil), external dimension (LxBxH): 1560 mm x 1110 mm x 2140 mm, basic equipment 1 pair flat dies   Serial number #N   Applications: damask free form forging punching, thorning,... flattening, upsetting,...   Advantages: stable steel welding construction of the press frame small required space free positioning end positions adjustable hydraulic pressure simple and exact control with foot pedal double-acting hydraulic cylinder high pressing speed large lift height significantly lower noise emission than power hammers quick and easy start up of the machine robust, durable and low ammount of maintenance flexible in use due to lateral insertion (80mm x 180mm) easy and flexible die mounting with T-slots on the press table

  suitable for above or below, Dimensions 230x130x50mm, made of hardened tool steel, Combination shape flat / convex (R=75 mm)

  for hydraulic forging press, hardened from tool steel, including drawing creation   Just ask us, we will create an offer and after the order has been approved, the dies will be individually manufactured.

  casing made of aluminium, foot switch-cover prevents unintentional operation, for forging press with one speed level.

  casing made of aluminium, foot switch-cover prevents unintentional operation, for forging press with two speed levels.

  0-400 bar (0-40 MPa)

    Chief cause of damage and malfunction of hydraulic machines is polluted oil. The oil filter ensures that the hydraulic system (pump, valves, pipes) remains free of dirt particles and prevents damage. Replacing the oil filter and hydraulic oil regular ensures a long life and high performance of the system.

    Chief cause of damage and malfunction of hydraulic machines is polluted oil. The oil filter ensures that the hydraulic system (pump, valves, pipes) remains free of dirt particles and prevents damage. Replacing the oil filter and hydraulic oil regular ensures a long life and high performance of the system.

  with integrated temperature gauge   Chief cause of damage and malfunction of hydraulic machines is polluted oil. The oil filter ensures that the hydraulic system (pump, valves, pipes) remains free of dirt particles and prevents damage. Replacing the oil filter and hydraulic oil regular ensures a long life and high performance of the system.

  Length of the sensor approx. 65 mm, Diameter of the sensor approx. 12 mm

  approx. 45x220x15 mm

  approx. 50x260x15 mm

Oil filler filter for forging press AN-Y04

  spacer/ring for elastic coupling, for coupling between hydraulic pump and electric motor   This part should be replaced regularly, depending on wear to avoid damage of the electric motor and hydraulic pump.

  spacer/ring for elastic coupling, for coupling between hydraulic pump and electric motor   This part should be replaced regularly, depending on wear to avoid damage of the electric motor and hydraulic pump.

  wrench size 75 mm, with cross holes for using a lever, for changing the guide block

  wrench size 120 mm, with cross holes for using a lever, for changing the guide block

  Axial piston pump, suitable for hydraulic forging press AN-Y04-25t