Gas Forge
Gas forges are concerning air pollution an environmentally friendly and safe alternative to forging with coal. The workpiece is heated in a bed of ceramic chips.
These devices are particularly well-suited for schools and larger institutions. Gas forges are an environmentally friendly and safe alternative to forging with coal. Even for forges located near towns or villages, and where soot or ash in the exhaust gases are a problem, these devices offer a good alternative for maintaining familiar working methods.
- Simple, safe operation
- robust, stable construction
- easy flame control
- clean combustion (exhaust gas recirculation is required)
- stepless power regulation
- pilot burner with thermoelectric flame monitoring
- ceramic chip monitoring
- available for natural gas or propane
gas forge type G 800 P
with ceramic chips, for propan dimensions of table 800 x 800 mm, height 800 mm, cast iron fire pan 335 x 295 mm, pilot burner with thermoelectric security, smooth power regulation, with 3 burners, with 25 kg of ceramic chips, single-phase 230 V, 50 Hz, gas connection 1/2" i, gas consumption 1,5 kg/h propan serial number #N
gas forge type G 800 E
with ceramic chips, for natural gas, dimensions of table 800 x 800 mm, height 800 mm, cast iron fire pan 335 x 295 mm, pilot burner with thermoelectric security, smooth power regulation, with 3 burners, with 25 kg of ceramic chips, single-phase 230 V, 50 Hz, gas connection 1/2" i, gas consumption 1,9 m³/h natural gas serial number #N
gas forge type G 1000 P
with ceramic chips, for propan dimensions of table 1000 x 800 mm, height 800 mm, cast iron fire pan 520 x 200 mm, pilot burner with thermoelectric security, smooth power regulation, with 7 burners, usable with 3 or 4 or 7 burners, with 50 kg of ceramic chips, single-phase 230 V, 50 Hz, gas connection 2 x 1/2" i, gas consumption 4 kg/h propan serial number #N
gas forge type G 1000 E
with ceramic chips, for natural gas, dimensions of table 1000 x 800 mm, height 800 mm cast iron fire pan 520 x 200 mm pilot burner with thermoelectric security smooth power regulation with 7 burners usable with 3 or 4 or 7 burners with 50 kg of ceramic chips single-phase 230 V, 50 Hz gas connection 2 x 1/2" i gas consumption 4 m³/h natural gas serial number #N
Questions - Answers - FAQ
Many questions about gas forges, which we try to answer without meaningless AI-generated text.
Do you still have questions? Then feel free to ask them directly here:
Email
Why a Gas Forge?
Gas forges are used where the traditional coal forge is not feasible.
They offer many advantages compared to coal, and the operation of the equipment is also significantly easier.
Therefore, these devices are also ideally suited for schools or training forges.
Advantages of a gas fire?
- Easy operation
- Fast heat-up time
- Easy setup and commissioning
- Lower environmental impact than coal
- Robust and stable design
- Easy flame control
- Clean combustion (flue gas venting is still required)
- Stepless power control
- Pilot burner with thermoelectric flame monitoring
- Ceramic chip monitoring
- Available as a natural gas or propane version
- Low gas consumption
- and much more...
Where can I buy a gas fire?
Of course, right here. Important: all our appliances are tested and comply with all current standards and regulations. "Cheap appliances" from the internet have neither CE marking nor are approved components used.
Are spare parts available for the devices?
We also offer spare parts for older devices and are happy to help with any questions or on-site service for any problems.
Is an exhaust system required?
As with any combustion process, gas forging furnaces also produce exhaust gases. These impair the quality of the air if they remain in the installation room. The carbon monoxide contained in the exhaust gases has a particularly negative impact.
We therefore generally recommend connecting gas forging furnaces to an exhaust system.
Operation without such a system is only possible if the units are operated only briefly and the installation room is sufficiently large and well-ventilated.
All emission limits must be observed.