temperature sensor up to 1200°C element type K 3 x 200 mm, length of wire 1500 mm (temperature resistant up to 180°), plug type K for DTM   Without digital temperature indicator !

  up to 1370°C (2498 °F), for 2 pieces of temperature sensor type K   Delivery includes protective cover, 2 pieces of sensors up to 250 °C, Sensors up to 1200°C available as accessories.   This thermometer allows to work with two sensors at the same time and reliably measure temperatures up to a maximum of 1370 °C. This means that the temperature in the oven and in the workpiece can be measured at the same time.   Technical data:   2 sensor slots for "Type K" sensor Measuring range: -200°C....1370°C, resolution: 0.1°C Accuracy: 0.1±0.4°C Various functions: temperature measurement, max./min., average value, hold function Display: LCD Operating temperature range: -10°C...50°C Dimensions approx. 158 x 75 x 41 mm Unit adjustable °C or °F or K 9V block battery with folding base for setting up

Infrared thermometer 1600°C (2912°F) up to 1600 °C (2912°F), rugged design, easy handling.   Delivery with protective bag   Technical specifications:   Measuring range: -50°C .... 1600°C, resolution: 0.1°C Accuracy: ± 2 °C Various functions: temperature measurement, Temperature alarm (max./min.), temperature (max./min.), average temperature, differential temperature Display: LCD, with background lighting Battery display in % Operating temperature range: 0°C...50°C Dimensions approx. 110 x 170 x 50 mm Automatic shutdown Unit can be set to °C or °F Emissivity adjustable 0.1-1.0 (suitable for different surfaces), delivery including emissivity table Measurement time: 0.5s 9V block battery (included)

  Measurement units: HRC, HB, HRB, HV, HSD, Mpa robust design, simple operation   Delivery incl. protective bag, hardness test block, test sensor type D   This mobile hardness tester enables fast and reliable hardness testing of various materials and components. Ideal for testing blades, hammers, anvils and other components. It is very easy to use and the automatic detection of different sensors leaves little room for error.   Technical specifications: Measurement units: HB, HRB, HRC, HV, HSD, Mpa automatic scale conversion Accuracy: ±6 HLD Measurements up to approx. 69 HRC/950HV Measured value comparison function Data memory with 1000 readings USB data upload interface low power consumption (3xAAA batteries) Measurement according to DIN 50156, ASTM A956, GB/T1172, GB/T17394 Application temperature: -10 to 40°C Measurements also possible from the side or upside down   We recommend the "Type C" sensor when measuring blades. We recommend measuring thin workpieces on a massive and solid steel plate.

    Features: 100% MADE in Germany For materials with a hardness of up to 68 HRC For precise marking of a drill point and for guiding the drill tip to prevent wandering Manufactured from high-alloy tool steel Through-hardened for maximum impact force transmission Special safety striking head prevents material chipping and deformation Polished working tip Brazed, precision-ground carbide tip Gold-colored dip-lacquered finish

  0 - 9, DIN 1451   Features: Suitable for various materials Clean, precise contour reproduction Professional quality Long service life 100% Made in Germany Rounded, chamfered striking ends Suitable for marking workpieces with a tensile strength of 600–800 N/mm² Font style compliant with DIN 1451 / Legible imprint Hardness at the engraving: approx. 58–61 HRC Ground on the side adjacent to the engraving (orientation edge) Each stamp is marked with: visible engraving, character height, "Made in Germany," and the "Wear Safety Goggles" symbol Packaged in shatterproof blue plastic cases   Other dimensions available upon request

  0 - 9, DIN 1451 10x10x80 mm, height of numbers 5 mm,   recommended for use when marking inox, hardened to HRC 58-60 made in Germany

  0 - 9, DIN 1451   Features: Suitable for various materials Clean, precise contour reproduction Professional quality Long service life 100% Made in Germany Rounded, chamfered striking ends Suitable for marking workpieces with a tensile strength of 600–800 N/mm² Font style compliant with DIN 1451 / Legible imprint Hardness at the engraving: approx. 58–61 HRC Ground on the side adjacent to the engraving (orientation edge) Each stamp is marked with: visible engraving, character height, "Made in Germany," and the "Wear Safety Goggles" symbol Packaged in shatterproof blue plastic cases   Other dimensions available upon request

  letters A-Z, DIN 1451   Features: Suitable for various materials Clean, precise contour reproduction Professional quality Long service life 100% Made in Germany Rounded, chamfered striking ends Suitable for marking workpieces with a tensile strength of 600–800 N/mm² Font style compliant with DIN 1451 / Legible imprint Hardness at the engraving: approx. 58–61 HRC Ground on the side adjacent to the engraving (orientation edge) Each stamp is marked with: visible engraving, character height, "Made in Germany," and the "Wear Safety Goggles" symbol Packaged in shatterproof blue plastic cases   Other dimensions available upon request

  letters A-Z, DIN 1451 10x10x80 mm, height of numbers 5 mm   recommended for use when marking inox, hardened to HRC 58-60 made in Germany

  letters A-Z, DIN 1451   Features: Suitable for various materials Clean, precise contour reproduction Professional quality Long service life 100% Made in Germany Rounded, chamfered striking ends Suitable for marking workpieces with a tensile strength of 600–800 N/mm² Font style compliant with DIN 1451 / Legible imprint Hardness at the engraving: approx. 58–61 HRC Ground on the side adjacent to the engraving (orientation edge) Each stamp is marked with: visible engraving, character height, "Made in Germany," and the "Wear Safety Goggles" symbol Packaged in shatterproof blue plastic cases   Other dimensions available upon request

  Total length approx. 45 cm   Extra-long, sturdy workshop version with coconut bristles

  Professional top quality Width #Varinfo   Very high paint absorption and release for ideal paint application and a perfect finish.   Top quality with new bristles Stainless steel clamp Hardwood handle, unpainted   Can be used for all paints: for solvent-based, opaque varnishes and paints for water-based, non-solvent-based lacquers and paints for glazes (non-covering paints) for railings, surfaces, facades, walls, ceilings, and much more ...

  wooden body, dimensions ~ 205x55 mm

  dimensions 235 x 40 x 3 mm, measurement range 6 + 8 + 10 + 12 + 14 + 16 + 18 mm, radius 5 + 6 + 8 + 10 mm, scale 0 - 12 mm (0,1 mm grading), engraved on both sides

  range 150 mm, fully hardened   Characteristics: rust-free matt chrome-plated fully hardened 4-way measurement with cross points and depth gauge tested and certified Delivery incl. storage bag   The company "SCALA" has been developing and producing first-class measuring tools "Made in Germany" for over 75 years.

  cold hammered aluminium special alloy, section 1.4 mm thick,  height 14 mm.

  nature-coloured, cold hammered aluminium special alloy, section 1.4 mm thick,  height 14 mm, mm-graduation, Digits and scale deep etched and laid out black/red.   One side is graduated from right to left (red graduation). Especially suitable for left-handers.

  made of aluminum, link height 15 mm, link thickness 2.0 mm, rounded edges. EC accuracy class III.   This yard stick is a must-have in any blacksmith's bag. It enables the precise measurement of hot workpieces. Its robust and durable design makes it the perfect companion in the forge and on the construction site.   Properties: robust design weatherproof insensitive to oil, grease and much more... abrasion-resistant sturdy aluminum alloy (light metal) low weight numbers and graduations deep-etched and black anodized locking, nickel-plated steel springs accuracy class III   Picture 3 shows both available lengths in comparison. Sold individually.

  refined steel tape, white enamelled height 16 mm, accuracy according EC class II   small and easy-to-use, compact, robust and accurate with GO/STOP button (from null to two metres in one second)

  metallic rule, measuring length #Varinfo section XX mm, height XX mm   Small  helper in the forge and for every pocket. With a deeply etched scale, robust and durable. We have these treasures from remnants of German manufacturers, so delivery as long as stocks last.

Rule made of spring steel #Varinfo Length #Varinfo Section 30 x 1 mm   Characteristics: made of polished, hardened spring steel pliable and flexible stainless graduation and ciffers black   The company "SCALA" has been developing and producing first-class measuring tools "Made in Germany" for over 75 years.

Rule made of spring steel #Varinfo Length 500 mm, Section 13 x 0,25 mm   Characteristics: made steel pliable and flexible graduation and ciffers etched