with 2 horns, with lateral fore-anvil, of cast iron, black, galvanized, surface planed, face width 20 mm, total length 170 mm, height 70 mm, weight 1,3 kg   Small anvil made of gray cast iron, as a decorative object (anvil is not hardened).

  with 2 horns, with lateral fore-anvil, of cast iron, black, galvanized, surface planed, face width 20 mm, total length 170 mm, height 70 mm, weight 1,3 kg   Small anvil made of gray cast iron, as a decorative object (anvil is not hardened).

  of alloyed cast steel, hardened, surface planed with 2 horns, with lateral fore-anvil, face width 20 mm, total length 170 mm, height 70 mm, weight ~ 1,3 kg

  with 2 horns, with lateral fore-anvil, of alloyed cast steel, hardened, gold-plated, surface planed, face width 20 mm, total length 170 mm, height 70 mm, weight 1,3 kg

  with round and square horn, of alloyed cast steel, hardened, chromium-plated, surface planed, face width 25 mm, total length 105 mm, height 40 mm, weight 450 g

  with round and square horn, of alloyed cast steel, hardened, gold-plated, surface planed, face width 25 mm, total length 105 mm, height 40 mm, weight 450 g

  of alloyed cast steel with round and square horn, hardened, chromium-plated, surface planed, face width 30 mm, total length 111 mm, height 44 mm, weight 490 g

  with round and square horn of alloyed cast steel, hardened, surface planed and polished, face width 26 mm, total length 120 mm, height 45 mm, weight 400 g

  Featuring various working surfaces, milled and hardened from tool steel; leveling surface, V-block, bending edges, forming grooves, dishing depressions, boreholes, square mounting sockets (20 x 20 and 28 x 28); Dimensions: 120 x 120 x 120 mm, 10 kg, burnished finish.   Back in Stock!   Features: Milled from tool steel Hardened for long service life Blackened (burnished) finish Compact dimensions   Working Surfaces: Flattening surface: 120 x 120 mm, flat 1x Square socket: 20 x 20 mm 1x Square socket: 28 x 28 mm Square sockets feature spring-loaded plates 90° V-groove (Prism): 20 mm deep Bending edge: Continuous Mounting hole: Ø 13 mm, 60 mm deep Swaging groove: R 20, 20 mm deep Forming groove: R 10, 10 mm deep Dishing depression: Ø 75 mm (R 55) Forming depressions: R 3, 6, 8, 10, 12, 14, 18 mm Holes: Ø 3, 4, 5, 6 mm — 15 mm deep Holes: Ø 13 mm — 50 mm deep     Compared to the older variant, this version is not cast, but rather milled from a solid block of tool steel. Subsequently, the part is hardened and blackened. This manufacturing process results in superior surface finish and hardness compared to the previous model.

  120 x 120 x 120 mm, 10 kg