with dia. 1 mm/2 mm/3 mm/4 mm /5 mm and centre punch dia. 4 mm ground and polished surfaces 6-piece set, in a metal case   Manufactured from high-alloy tool steel Fully hardened for maximum impact force transmission Special safety striking head prevents material chipping and deformation Polished surface Rounded edges Gold-colored dip-lacquered finish Meets or exceeds requirements of common standards (e.g., DIN) All metal parts are GS-certified supplied in a metal case   Tools comply with DIN 6458

  Made of special steel; ground and polished surface. 6-piece set, 150 mm length each, supplied in a metal case. Includes one pin punch each in sizes Ø 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, and 10 mm. For driving out or removing bolts, rivets, cotter pins, or other fasteners from through-holes, or for precisely countersinking the above-mentioned fasteners into the workpiece surface.   High-alloy tool steel, fully tempered Special safety impact head prevents material chipping and deformation High-gloss polished using an optimized process - no need for chrome Fully hardened for optimal force transmission Gold-colored dip-coated Rounded edges prevent damage to the workpiece Meets or exceeds the requirements of common standards (e.g., DIN) In a metal case

  with diameter 3 mm/4 mm/5 mm/6 mm /8 mm and 10 mm Made of special steel, fully hardened, with a ground and polished surface. 6-piece set; length: 150 mm each; supplied in a metal case. For driving out or removing bolts, rivets, cotter pins, or other fasteners from through-holes, or for precisely countersinking the above-mentioned fasteners into the workpiece surface.   Premium tool steel, fully tempered, hardness ≥ 58 HRC Special safety impact head prevents material chipping and deformation High-gloss polished using an optimized process - no need for chrome Fully hardened for optimal force transmission powder coated red Rounded edges prevent damage to the workpiece Meets or exceeds the requirements of common standards (e.g., DIN) In a metal case

    Features: 100% MADE in Germany For materials with a hardness of up to 68 HRC For precise marking of a drill point and for guiding the drill tip to prevent wandering Manufactured from high-alloy tool steel Through-hardened for maximum impact force transmission Special safety striking head prevents material chipping and deformation Polished working tip Brazed, precision-ground carbide tip Gold-colored dip-lacquered finish

  made of C75, open-die forged, hardened, hardened and ground, Length approx. 170 mm     For the robust application!   Stable and free-form forged, this center punch is extremely stable. The design ensures optimal handling. Forging and hardening the C75 steel makes these punches very hard and resilient and should the point ever become blunt it can be easily resharpened.   Characteristics: hand forged C75 - hard and resilient nicely balanced robust   First-class quality from a small German master forge.

  containing 10 pieces with different ornaments, made of 115CrV3, properly hardened, Length 100 mm, width 6x6 mm

  suitable for touchmark stamp up to 20x20 mm or several  numeral- and marking stamps (clamping range) max. 10x35 mm, Nylon fabric strap with rubberised high-grip surface can be easily set by simple adjustment of the dial   Ergonomically designed to match the shape of the human hand, creating a comfortable and firm hold Lightweight grip also has a vibration absorbing handle, providing users with smooth control

  with individual design of high quality tool steel, hardened.   Customized product - No cancellation, exchange or return!   Your Personal Blacksmith’s Mark – Imprinted for Eternity   A custom maker's mark, hallmark, or signature stamp brands your creations for eternity with a personal touch.   Whether for the ambitious hobby art blacksmith or the professional metalworker: Our punches are precision-crafted from high-grade tool steel, carefully hardened, and tailored exactly to your specifications.   Your Benefits at a Glance: Highest Quality & Durability: Excellent wear resistance for long-lasting use. Versatile Application: Perfectly suited for both hot and cold work. Fast Delivery: So you can hold your tool in your hands without delay.   Ordering & Design Instructions The Right Size: A proven and practical logo size is up to approx. 10 x 10 mm. Larger stamps are of course possible, but keep in mind that striking by hand requires significantly more force as the stamp area increases. How to Submit Your Artwork: Simply send us your template via email to info@angele.de. After careful review, you will receive a binding order confirmation from us. (Note: The final price may vary depending on the complexity of the design).   Or the classic way by mail: Alternatively, we can use a business card or a high-quality black-and-white print sent by post as your template.   Important Note: Vector data preferred: Please convert all fonts to curves (paths) to avoid font discrepancies. Readable formats: *.ai, *.eps, *.dxf, *.dwg, *.wmf, *.plt, *.cdr, *.pdf. Pixel formats: *.tif, *.bmp, *.jpg, *.gif, *.pcx, *.pdf are also acceptable. (Please avoid shading, halftones, or color gradients).   Good to Know: What Makes a Strong Logo When designing a punch, the rule „more is more“ rarely applies. The strongest and most memorable trademarks do not rely on overloaded details or intricate effects, but on reduction, clarity, and a stylized design language.   A good stamp must work at a glance and transfer cleanly into metal.   Design Tip: AI-generated logos often tend to feature unnecessary color gradients, excessive details, and fine lines that are difficult or impossible to stamp into metal – and they all end up looking the same.   A truly strong trademark needs no gimmicks – it convinces through simplicity, artisanal substance, and timeless elegance. Look at major, timeless brands: The power lies in reduction. Therefore, take the time to think about it yourself before relying on automated drafts!

  of high quality tool steel, wear-resistant, hardened and tempered   With this stamp, forgings and other workpieces can be easily marked. For example, children's blacksmithing can create individualized and creative objects quickly and easily.

  0 - 9, DIN 1451   Features: Suitable for various materials Clean, precise contour reproduction Professional quality Long service life 100% Made in Germany Rounded, chamfered striking ends Suitable for marking workpieces with a tensile strength of 600–800 N/mm² Font style compliant with DIN 1451 / Legible imprint Hardness at the engraving: approx. 58–61 HRC Ground on the side adjacent to the engraving (orientation edge) Each stamp is marked with: visible engraving, character height, "Made in Germany," and the "Wear Safety Goggles" symbol Packaged in shatterproof blue plastic cases   Other dimensions available upon request

  0 - 9, DIN 1451 10x10x80 mm, height of numbers 5 mm,   recommended for use when marking inox, hardened to HRC 58-60 made in Germany

  0 - 9, DIN 1451   Features: Suitable for various materials Clean, precise contour reproduction Professional quality Long service life 100% Made in Germany Rounded, chamfered striking ends Suitable for marking workpieces with a tensile strength of 600–800 N/mm² Font style compliant with DIN 1451 / Legible imprint Hardness at the engraving: approx. 58–61 HRC Ground on the side adjacent to the engraving (orientation edge) Each stamp is marked with: visible engraving, character height, "Made in Germany," and the "Wear Safety Goggles" symbol Packaged in shatterproof blue plastic cases   Other dimensions available upon request

  letters A-Z, DIN 1451   Features: Suitable for various materials Clean, precise contour reproduction Professional quality Long service life 100% Made in Germany Rounded, chamfered striking ends Suitable for marking workpieces with a tensile strength of 600–800 N/mm² Font style compliant with DIN 1451 / Legible imprint Hardness at the engraving: approx. 58–61 HRC Ground on the side adjacent to the engraving (orientation edge) Each stamp is marked with: visible engraving, character height, "Made in Germany," and the "Wear Safety Goggles" symbol Packaged in shatterproof blue plastic cases   Other dimensions available upon request

  letters A-Z, DIN 1451 10x10x80 mm, height of numbers 5 mm   recommended for use when marking inox, hardened to HRC 58-60 made in Germany

  letters A-Z, DIN 1451   Features: Suitable for various materials Clean, precise contour reproduction Professional quality Long service life 100% Made in Germany Rounded, chamfered striking ends Suitable for marking workpieces with a tensile strength of 600–800 N/mm² Font style compliant with DIN 1451 / Legible imprint Hardness at the engraving: approx. 58–61 HRC Ground on the side adjacent to the engraving (orientation edge) Each stamp is marked with: visible engraving, character height, "Made in Germany," and the "Wear Safety Goggles" symbol Packaged in shatterproof blue plastic cases   Other dimensions available upon request

  Number height approx. 16 mm, approx. 20x20 mm, height approx. 35 mm, M10 thread on the back. Engraving depth approx. 4 mm.