, DIN 5107, without handle   Used for cutting warm forging material.

  tungsten alloyed steel, blade width approx. 55...60 mm, total length ca. 195 mm, without handle.   Used for cutting warm forging material.

  without handle   The classic tool for driving through/punching/punching   Features: forged made of tool steel robust professional quality produced in Germany   Tip: The handle should not be wedged but should sit loosely to prevent recoil.   Supplied without handle; this is available as an accessory.

  without handle   The classic tool for driving through/punching/punching   Features: forged made of tool steel robust professional quality produced in Germany   Tip: The handle should not be wedged but should sit loosely to prevent recoil.   Supplied without handle; this is available as an accessory.

  chrome-molybdenum air-hardening steel, DIN 6453, Width of blade approx. #varinfo   This chisel is primarily suitable for cold working.

  manganese silicon steel length 240 mm, width 26 mm, thickness 7 mm, blade 3 mm

  made of aluminium, approx. 160 x 80 x 8 mm   It stands to reason that when two forces come together one or the other will show the result of the immpact....   When these marks of the impact are left in the anvil, it is annoying. Sharp, hard and pointed tools can leave marks on the anvil. For this reason, the protective pad is used when splitting, punching, and much more - shortly before piercing the workpiece - between the anvil and the workpiece to protect the path of the anvil.   This pad is easier and cheaper to replace than the whole anvil...

  with dia. 1 mm/2 mm/3 mm/4 mm /5 mm and centre punch dia. 4 mm ground and polished surfaces 6-piece set, in a metal case   Manufactured from high-alloy tool steel Fully hardened for maximum impact force transmission Special safety striking head prevents material chipping and deformation Polished surface Rounded edges Gold-colored dip-lacquered finish Meets or exceeds requirements of common standards (e.g., DIN) All metal parts are GS-certified supplied in a metal case   Tools comply with DIN 6458

  Made of special steel; ground and polished surface. 6-piece set, 150 mm length each, supplied in a metal case. Includes one pin punch each in sizes Ø 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, and 10 mm. For driving out or removing bolts, rivets, cotter pins, or other fasteners from through-holes, or for precisely countersinking the above-mentioned fasteners into the workpiece surface.   High-alloy tool steel, fully tempered Special safety impact head prevents material chipping and deformation High-gloss polished using an optimized process - no need for chrome Fully hardened for optimal force transmission Gold-colored dip-coated Rounded edges prevent damage to the workpiece Meets or exceeds the requirements of common standards (e.g., DIN) In a metal case

  with diameter 3 mm/4 mm/5 mm/6 mm /8 mm and 10 mm Made of special steel, fully hardened, with a ground and polished surface. 6-piece set; length: 150 mm each; supplied in a metal case. For driving out or removing bolts, rivets, cotter pins, or other fasteners from through-holes, or for precisely countersinking the above-mentioned fasteners into the workpiece surface.   Premium tool steel, fully tempered, hardness ≥ 58 HRC Special safety impact head prevents material chipping and deformation High-gloss polished using an optimized process - no need for chrome Fully hardened for optimal force transmission powder coated red Rounded edges prevent damage to the workpiece Meets or exceeds the requirements of common standards (e.g., DIN) In a metal case

    Concerted pair of split chisel and punch makes work easier. The change in length due to split and punch compensate each other. The workpiece retains his length and that makes it possible to punch many holes fast and quick.

  forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, width of cutting edge ca. XX mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, width of cutting edge ~ 20 mm, for holes XXxXX mm or ØXX mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, for square holes XxX mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  forged of quality hot work steel, hardened and tempered, sharpened and polished, length about 220 mm, for holes X mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  forged of quality hot work steel, smoothed, length about 200 mm, square approx. 10x10 - 30x30 mm   Features: Forged from hot-work steel Ground and polished Special geometry For drilling square holes Long service life thanks to high-quality tool steel     These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  forged of quality hot work steel, smoothed, length about 200 mm, Diameter approx. 12 - 32 mm   Features: Forged from hot-work steel Ground and polished Special geometry For drilling round holes Long service life thanks to high-quality tool steel     These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  handforged from high quality steel, forged, smoothed and polished by hand, Length approx. 120 mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry     These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  handforged from high quality steel W303, forged diagonal, smoothed and polished by hand   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  forged of quality hot work steel, smoothed, length about 280 mm, for punching holes according to DIN.   Properties: Forged from hot-work steel Oil-hardened and tempered Ground and polished Long service life Very good heat resistance   This forged tool enables easy punching and thorning of blanks according to DIN. The thorn is forged and ground in such a way that the different "eye measurements" of the hammer head are reflected on the different lengths of the thorn. This makes thorning easy and you get the desired eye measurement to match the hammer handles with great repeatability.   Figure 2 shows the hammer thorn and a hammer blank forged with it. The hammer blank is not included in the scope of delivery.   These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria to the highest quality standards.   ...and anyone who wants to learn more about Peter Reisinger and his family business can find further information in the "Manufacturers" tab.

  forged of quality hot work steel, smoothed, length about 450 mm, for punching holes according to DIN.   Properties: Forged from hot-work steel Oil-hardened and tempered Ground and polished Long service life Very good heat resistance   This forged tool enables simple punching and thorning of blanks in accordance with DIN. The thorn is forged and ground in such a way that the different "eye measurements" of the axe head are reflected on the different lengths of the thorn. This makes it easy to thorn and you get the desired eye measurement to match the standard axe handles with great repeatability.   These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria to the highest quality standards.   ...and anyone who wants to learn more about Peter Reisinger and his family business can find further information in the "Manufacturers" tab.

  forged of quality hot work steel, smoothed, length about 490 mm, for punching holes according to DIN.   Properties: Forged from hot-work steel Oil-hardened and tempered Ground and polished Long service life Very good heat resistance     This forged tool enables simple punching and thorning of blanks according to DIN. The thorn is forged and ground in such a way that the different "eye measurements" of the axe head are reflected on the different lengths of the thorn. This makes it easy to thorn and you get the desired eye measurement to match the standard axe handles with great repeatability.   These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and anyone who wants to learn more about Peter Reisinger and his family business can find further information in the "Manufacturers" tab.