Forging Set

What do you need if you want to start forging?

We are often asked this question, but there is no general answer to this question... it depends on what equipment you have and what you want to forge. There are hardly any limits to the creative freedom when forging - you only need a sensible basic set of equipment to get started.

The absolute basics are a hammer, tongs, an anvil and something to heat the forged material. A clear guide with basic knowledge, good instructions, tips on the right choice of material and the appropriate heat treatment is essential even for those who don't like reading, because there are few jobs that look so simple but require as much practice and experience as forging.

2.79 %

Forging Set 1

00561001

Forging Set 1 1x Blacksmith's 1,25 kg (541012) 1x Wolf's jaw tong 400 (538040) 1x Book "Schmieden lernen" (961110) - in German Blacksmith's hammer 1,25 kg is the ideal standard hammer. The weight of the head is a good mean. The ash handle fits comfortably in your hand. The Wolf's jaw tong 400 can be used universally for flat, round and square workpieces. This tong is ideal for 8mm workpieces, but you can also hold smaller and bigger ones. Please note: The book "Schmieden lernen" is in German!

in stock

€116.90* €120.25*

set

0.5 %

Forging Set 2

00561002

Forging Set 2 1x Blacksmith's hammer 1,25 kg (541012) 1x Wolf's jaw tong 400 (538040) 1x Anvil 50kg (412250) 1x Book "Schmieden lernen" (961110) - in German Blacksmith's hammer 1,25 kg is the ideal standard hammer. The weight of the head is a good mean. The ash handle fits comfortably in your hand. The Wolf's jaw tong 400 can be used universally for flat, round and square workpieces. This tong is ideal for 8mm workpieces, but you can also hold smaller and bigger ones. Anvil 50 kg 2 horns, drop forged and hardened, face width 110 mm, face length 230 mm length of horns each 160 mm, total length 550 mm, height 220 mm, foot 210 x 250 mm, with square hole 25 mm for anvil tools and round hole ø 23 mm.

in stock

€669.00* €672.36*

set

0.38 %

Forging Set 3

00561003

Forging Set 3 1x Blacksmith's hammer 1,25 kg (541012) 1x Wolf's jaw tong 400 (538040) 1x Portable forge type F600W (116001) 1x Book "Schmieden lernen" (961110) - in German Blacksmith's hammer 1,25 kg is the ideal standard hammer. The weight of the head is a good mean. The ash handle fits comfortably in your hand. The Wolf's jaw tong 400 can be used universally for flat, round and square workpieces. This tong is ideal for 8mm workpieces, but you can also hold smaller and bigger ones. Portable forge type F 600 W, single phase 230 V, 30 W, for solid fuel (coal). Table top 600 x 500 x 4 mm, height 800 mm, complete with blower with switch, with power cable 3 m with plug (type F), complete with hearth sole with cast iron fire pan (inner top dim. 215 x 195 mm), air valve and ash-cleaner,bow for suspension of tools.

in stock

€885.90* €889.25*

set

0.23 %

Forging Set 4

00561004

Forging Set 4 1x Blacksmith's hammer "Krenzer" 1,25 kg (541013) 1x Wolf's jaw tong 400 (538040) 1x Portable forge type F600W (116001) 1x Anvil 50kg (412250) 1x Book "Schmieden lernen" (961110) - in German Blacksmith's hammer 1,25 kg is the ideal standard hammer. The weight of the head is a good mean. The ash handle fits comfortably in your hand. The Wolf's jaw tong 400 can be used universally for flat, round and square workpieces. This tong is ideal for 8mm workpieces, but you can also hold smaller and bigger ones. Portable forge type F 600 W, single phase 230 V, 30 W, for solid fuel (coal). Table top 600 x 500 x 4 mm, height 800 mm, complete with blower with switch, with power cable 3 m with plug (type F), complete with hearth sole with cast iron fire pan (inner top dim. 215 x 195 mm), air valve and ash-cleaner,bow for suspension of tools. Anvil 50 kg 2 horns, drop forged and hardened, face width 110 mm, face length 230 mm length of horns each 160 mm, total length 550 mm, height 220 mm, foot 210 x 250 mm, with square hole 25 mm for anvil tools and round hole ø 23 mm.

in stock

€1,435.23* €1,438.58*

set

Forging Set 5

00561005

Forging Set 5 "Forging Package Syntra" The set consists: 1x blacksmith's hammer 1.25 kg Krenzer (541013) 1x wolf's jaw tong 500 mm (538050) 1x Centre Punch with carbide tip (518550.4) 1x raw piece for hammers 0,6 kg (518106) 1x All-writer with soapstone lead (617144) 1x soap stone spare leads (617146) 1x welders slate pencil, wood-coated (617126) 1x Blacksmith glove L, Size 9 (98101017) 1x Aluminium rule, 2 meter, black (550516) 1x brass wire brush (550116) 1x wire brush steel (550117) Blacksmith's hammer 1,25 kg is the ideal standard hammer. The weight of the head is a good mean. The ash handle fits comfortably in your hand. The Wolf's jaw tong 500 can be used universally for flat, round and square workpieces. This tong is ideal for 12 mm workpieces, but you can also hold smaller and bigger ones. Centre Punch with carbide tip 3. Length 120 mm, working edge with brazed, precision ground carbide tip. Raw piece for hammers 0,6 kg, for own forging. Made of material C 45, for tempering in water. Easy to create your own split chissel or other tools. All-writer with soapstone lead, made of durable brass material. 1 pcs lead holder with sharpener inside the push button, with soapstone lead, ø 5,6 mm, length 120 mm. Soapstone lead for marking on metal and steel, welding and cutting up to 2.000 °C with a long lasting white, fireproof line, clearly visible even through welding goggles. welders slate pencil, wood-coated. Single piece, with silver lead Pencil to mark any kind of surface even greasy, dirty or wet. Marks are resistant to torch flames and highly visible during welding. Blacksmith glove L (Size 9) made of bend leather, cuff inside made of grey flame retardant fabric, seamed with KEVLAR® yarn. metallic rule, 2 meter, black anodized cold hammered aluminium special alloy, section 1.4 mm thick, height 14 mm, mm-graduation, Digits and scale deep etched. brass wire brush, dimensions 285x33 mm. Best suited for cleaning or deburring. Wire brush steel, dimensions 285x33 mm, Best suited for derusting, cleaning, deburring or deslagging.

in stock

€183.20*

set

initial equipment for foundry

00860021

initial equipment for foundry pcked in a stable mortar trough 40x70x30 cm The equipment can be used to produce lettering, jewelry, works of art and small technical parts up to a size of 160x70x70 mm. You will find everything you need in this equipment for the molding of models, metal melting and machining of the casting. set consists of: moulding box 100x200x100 mm letters A-Z 25 mm sheet 300x200x2,5 mm as mat special moulding sand, oil-bonded 25 kg coal-shovel with wooden handle hand broom wooden tamper square bar 12 mm for stripping paintbrush ø 25 mm talc powder, 500 g model 40 mm eyebolt 30x10 spoon lancet L6 c-clamp 160 mm soft-head hammer 32 mm gaz stove casting spoon 60 mm with wooden handle side cutter 180 mm engineers pliers 180 mm metal saw needle files, set of 6 abrasive paper 40-80-240 brass wire brush blacksmith glove L (Size 9) protection goggles tin (Sn 99,9) book: Die Metallgiesswerkstatt (in German) toolbox mortar trough

Available in 30 days, delivery time 1-3 days

€549.00*

pcs