Anvil protective pad
made of aluminium,
approx. 160 x 80 x 8 mm
It stands to reason that when two forces come together one or the other will show the result of the immpact....
When these marks of the impact are left in the anvil, it is annoying. Sharp, hard and pointed tools can leave marks on the anvil.
For this reason, the protective pad is used when splitting, punching, and much more - shortly before piercing the workpiece - between the anvil and the workpiece to protect the path of the anvil.
This pad is easier and cheaper to replace than the whole anvil...
Fire Punch forged - handforged
made of C75, open-die forged, hardened,
hardened and ground,
Length approx. 170 mm
For the robust application!
Stable and free-form forged, this center punch is extremely stable.
The design ensures optimal handling.
Forging and hardening the C75 steel makes these punches very hard and resilient and should the point ever become blunt it can be easily resharpened.
Characteristics:
hand forged
C75 - hard and resilient
nicely balanced
robust
First-class quality from a small German master forge.
Hofi-punch set
Concerted pair of split chisel and punch makes work easier.
The change in length due to split and punch compensate each other. The workpiece retains his length and that makes it possible to punch many holes fast and quick.
forged of quality tool steel,
approx. 400 x 34 x 20 mm (LxWxH),
with holes Ø 4, 5, 6, 8, 10,12 mm,
one side counterbored,
one side beveled,
hardened and tempered
Features:
Made of tool steel
Hardened and tempered
Forged handle
Precisely machined holes
One side countersunk
One side chamfered
These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.
...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
forged of quality tool steel,
approx. 400 x 34 x 20 mm (LxWxH),
with square holes 5, 6, 8, 10,12 mm,
one side beveled,
hardened and tempered
Features:
Made of tool steel
Hardened and tempered
Forged handle
Precisely machined holes
One side countersunk
One side chamfered
These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.
...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
forged of quality hot work steel W303,
hardened and tempered,
sharpened and polished,
length about 220 mm,
width of cutting edge ca. XX mm
These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.
...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
forged of quality hot work steel W303,
hardened and tempered,
sharpened and polished,
length about 220 mm,
width of cutting edge ~ 20 mm,
for holes XXxXX mm or ØXX mm
These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.
...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
forged of quality hot work steel W303,
hardened and tempered,
sharpened and polished,
length about 220 mm,
for square holes XxX mm
These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.
...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
forged of quality hot work steel W303,
smoothed,
length about 200 mm, square approx. 10x10 - 30x30 mm
Features:
Forged from hot-work steel W303
Ground and polished
Special geometry
For drilling square holes
Long service life thanks to W303 steel
These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.
...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
forged of quality hot work steel W303, smoothed,
length about 200 mm, Diameter approx. 12 - 32 mm
Features:
Forged from W303 hot-work steel
Ground and polished
Special geometry
For drilling round holes
Long service life thanks to W303 steel
These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.
...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.
Fastener for touchmark-, numeral- and marking stamp
suitable for touchmark stamp up to 20x20 mm
or several numeral- and marking stamps (clamping range) max. 10x35 mm,
Nylon fabric strap with rubberised high-grip surface can be easily set by simple adjustment of the dial
Ergonomically designed to match the shape of the human hand, creating a comfortable and firm hold
Lightweight grip also has a vibration absorbing handle, providing users with smooth control
numeral punch 5 mm, nickel plated
0 - 9, DIN 1451
10x10x80 mm, height of numbers 5 mm,
recommended for use when marking inox, hardened to HRC 58-60
made in Germany
marking stamp A-Z 5 mm nickel plated
letters A-Z, DIN 1451
10x10x80 mm, height of numbers 5 mm
recommended for use when marking inox, hardened to HRC 58-60
made in Germany