The advantages of an induction device:
- fast, efficient heating
- significantly lower costs than with gas and coal
- selective heating possible
- low oxidation on the workpiece
- heating up to the melting point possible
- no extraction necessary
- ideal for damask forging
- selective hardening possible
- and much more...
1.69
%
Induction heating device ISF7200
€5,800.00*
€5,900.00*
00171210
Induction heating device ISF7200
power 7.2 kW, 600kVA,
Power connection 400V/3-ph, 16A,
easy power control,
operation with foot pedal,
Dimensions approx. 550x350x250 mm (LxWxH),
Cooling water requirement: 3-6 l/min, 3-6 bar, 15-35°C,
Delivery incl. plug, foot pedal, inductor Ø 30 mm,
packed in a sturdy wooden box.
Device is sold without cooling
100% MADE in FRANCE
Characteristics:
fast, efficient heating
Significantly lower costs than gas and coal
selective heating possible
low oxidation on the workpiece
Possible to heat up to the melting point
no suction necessary
safe use
developed and produced in France
certified and tested according to European standards
quick spool change
easy handling
robust design
good spare parts availability
Why no "cheap import" from China?
There are inexpensive devices from the Far East, we know these devices, but strongly advise against them.
Induction devices work with high voltage and large currents. Most cheap import devices do not have a real "CE" certification or tested design according to European standards.
These devices work, but safe operation is not possible and, in addition to defects in the device, such as electric shock, short circuits and much more. serious accidents occur. Long-term health consequences can also occur with these devices.
The efficiency of these devices is also not comparable, and the performance and service life of the power electronics are significantly lower.
in stock
Induction heating device ISF24000
€13,800.00*
00171220
Induction heating device ISF24000
Power 24kW, 1000kVA,
Power connection 400V/3-ph, 32A,
easy power control,
operation with foot pedal,
Dimensions approx. 300x450x300 mm (LxWxH),
Cooling water requirement: 3-8 l/min, 3-6 bar, 15-35°C,
Delivery incl. plug, foot pedal, inductor Ø 30 mm,
packed in a sturdy wooden box.
Device is sold without cooling
100% MADE in FRANCE
Characteristics:
fast, efficient heating
Significantly lower costs than gas and coal
selective heating possible
low oxidation on the workpiece
Possible to heat up to the melting point
no suction necessary
safe use
developed and produced in France
certified and tested according to European standards
quick spool change
easy handling
robust design
good spare parts availability
Why no "cheap import" from China?
There are inexpensive devices from the Far East, we know these devices, but strongly advise against them.
Induction devices work with high voltage and large currents. Most cheap import devices do not have a real "CE" certification or tested design according to European standards.
These devices work, but safe operation is not possible and, in addition to defects in the device, such as electric shock, short circuits and much more. serious accidents occur. Long-term health consequences can also occur with these devices.
The efficiency of these devices is also not comparable, and the performance and service life of the power electronics are significantly lower.
Available in 30 days, delivery time 1-3 days