Go to homepage
€0.00*
Menu

Airhammer Say-Mak

The high-quality air forging hammers from Say-Mak are manufactured in Turkey and impress with a very good price-performance ratio. They are characterized by a robust welded steel construction and a sensitive control system. The drive is via a low-wear toothed belt, which makes this machine very low-maintenance. The die holder is compatible with the dies of common manufacturers. In addition to air hammers, we also supply all spare parts and common dies for this type of air hammer.
Airhammer Say-Mak
Airhammer Say-Mak
Dies Saymak
Dies Saymak
Spare parts Saymak
Spare parts Saymak
Filter products
(BLOB)damping mat 450x80x25 mm-1
damping mat 450x80x25 mm
00660061
  suitable for AN-15 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

€42.99*
pcs
(BLOB)damping mat 510x150x25 mm-1 (BLOB)damping mat 510x150x25 mm-2
damping mat 510x150x25 mm
00660062
  suitable for AN-25 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

€91.00*
pcs
(BLOB)damping mat 620x150x25 mm-1
damping mat 620x150x25 mm
00660063
  suitable for AN-40 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

€102.99*
pcs
(BLOB)damping mat 700x150x25 mm-1
damping mat 700x150x25 mm
00660064
  suitable for AN-55 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

€120.00*
pcs
(BLOB)SPH 50 air-hammer with steel base-2 SPH 50 air-hammer with steel base
SPH 50 air-hammer with steel base
00664010
SPH 50 air-hammer with steel base by SAY-MAK, ram weight 50 kg anvil weight 300 kg, max. clearance 185 mm, horiz. clearance 300 mm, number of strokes 240 strokes/min, electric power 4 kW, three-phase 3 x 400 Volt, total weight approx. 1100 kg, length 1560 mm, width over all 685 mm, height over all 1445 mm, equipped with 1 pair of dies, mounted on steel base.   #Seriennummer

€17,690.00*
Details
(BLOB)SPH 60 air-hammer with steel base-2
SPH 60 air-hammer with steel base
00664011
SPH 60 air-hammer with steel base by SAY-MAK, ram weight 60 kg anvil weight 300 kg, max. clearance 220 mm, horiz. clearance 300 mm, number of strokes 220 strokes/min, electric power 7,5 kW, three-phase 3 x 400 Volt, total weight 1300 kg, length 1700 mm, width over all 740 mm, height over all 1640 mm, equipped with 1 pair of dies, mounted on steel base.

€19,850.00*
Details
(BLOB)SPH 75 air-hammer with steel base-2
SPH 75 air-hammer with steel base
00664012
SPH 75 air-hammer with steel base by SAY-MAK, ram weight 75 kg anvil weight 430 kg, max. clearance 220 mm, horiz. clearance 320 mm, numer of strokes 210 strokes/min, electric power 7,5 kW, three-phase 3 x 400 Volt, total weight 1600 kg, length 1850 mm, width over all 780 mm, height over all 1680 mm, equipped with 1 pair of dies, mounted on steel base.

€24,360.00*
Details
(BLOB)TC-1 combination die 20/50 convex-2
TC-1 combination die 20/50 convex
00664100
TC-1 combination die 20/50 convex steel, length 130 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75

€290.00*
Details
(BLOB)TC-2 convex drawing die 50 mm-2
TC-2 convex drawing die 50 mm
00664102
TC-2 convex drawing die 50 mm steel, length 130 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75

€320.00*
pcs
(BLOB)TC-3 twofold convex drawing die 25 mm-2
TC-3 twofold convex drawing die 25 mm
00664103
TC-3 twofold convex drawing die 25 mm steel, length 130 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75

€320.00*
pcs
(BLOB)TC-4 flat die 78 mm, long-2
TC-4 flat die 78 mm, long
00664104
TC-4 flat die 78 mm, long steel, length 150 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75

€330.00*
pcs
(BLOB)TC-5 flat die 78 mm-2
TC-5 flat die 78 mm
00664105
TC-5 flat die 78 mm steel, length 130 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75

€320.00*
pcs
(BLOB)TC-6 flat die 78 mm, short-2
TC-6 flat die 78 mm, short
00664106
TC-6 flat die 78 mm, short steel, length 112 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75

€320.00*
pcs
(BLOB)TC-7 narrow face (conic) forging die 30 mm-2 TC-7 narrow face (conic) forging die 30 mm
TC-7 narrow face (conic) forging die 30 mm
00664107
TC-7 narrow face (conic) forging die 30 mm steel, length 130 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75

€320.00*
pcs
(BLOB)TC-7 narrow face (conic) forging die 20 mm-2 TC-7 narrow face (conic) forging die 20 mm
TC-7 narrow face (conic) forging die 20 mm
00664107.20
TC-7 narrow face (conic) forging die 20 mm steel, length 150 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75

€320.00*
Details
(BLOB)TC-8a chisel swage 35/90, top-2
TC-8a chisel swage 35/90, top
00664108
TC-8a chisel swage 35/90, top steel, length 150 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75

€380.00*
Details
(BLOB)TC-8b chisel swage 35/90, bottom-2
TC-8b chisel swage 35/90, bottom
00664109
TC-8b chisel swage 35/90, bottom steel, length 150 mm suitable for Say-Mak SPH 50 / SPH 60 / SPH 75

€380.00*
Details
(BLOB)TC-9 round die 78 mm-2
TC-9 round die 78 mm
00664110
TC-9 round die 78 mm steel C50 suitable for Say-Mak SPH 50 / SPH 60 / SPH 75

€320.00*
pcs
(BLOB)wedge 300 mm for dies Say-Mak-2
wedge 300 mm for dies Say-Mak
00664191
wedge 300 mm for dies Say-Mak suitable for Say-Mak SPH 50 / SPH 60 / SPH 75

€29.00*
pcs
(BLOB)wedge 250 mm for dies Say-Mak-2
wedge 250 mm for dies Say-Mak
00664192
wedge 250 mm for dies Say-Mak suitable for Say-Mak SPH 50 / SPH 60 / SPH 75

€29.00*
pcs
aeration filter 1" AG
00664411
aeration filter 1" AG for power hammers suitable for Say-Mak SPH 50 and other

€48.00*
pcs
(BLOB)muffler 1"-2
muffler 1"
00664412
muffler 1" for power hammers suitable for Say-Mak SPH 50 and other

€23.00*
pcs
(BLOB)motor sprocket 20 teeth-2 motor sprocket 20 teeth
motor sprocket 20 teeth
00664420
motor sprocket 20 teeth for power hammers SAY-MAK

€79.00*
pcs
(BLOB)motor sprocket 21 teeth-2 motor sprocket 21 teeth
motor sprocket 21 teeth
00664421
motor sprocket 21 teeth for power hammers SAY-MAK

€79.00*
pcs
This website uses cookies to ensure the best experience possible. More information...