Spring hammers

In the past, there were a number of manufacturers of spring hammers or air hammers. These robust machines can be used for many years. However, dies are usually no longer available for these machines. We have therefore decided to organize the production of such dies.

If these dies are not in stock, we require an exact drawing of the die holder or a sample of an existing die. We will then prepare a quote and the dies will be manufactured after the order has been approved.

Spring hammers Meitinger

damping mat 450x80x25 mm

00660061

damping mat 450x80x25 mm for airhammer to be glued with polyurethane solution adhesive under the steel base. Up to 4 damping mats are required for a proper installation: steel foundation without filling: 2 mats steel foundation with concrete filling: 3 mats steel foundation with concrete and steel filling: 4 mats

in stock

€42.99*

pcs

damping mat 510x150x25 mm

00660062

damping mat 510x150x25 mm for airhammer to be glued with polyurethane solution adhesive under the steel base. Up to 4 damping mats are required for a proper installation: steel foundation without filling: 2 mats steel foundation with concrete filling: 3 mats steel foundation with concrete and steel filling: 4 mats

in stock

€91.00*

pcs

damping mat 620x150x25 mm

00660063

damping mat 620x150x25 mm for airhammer to be glued with polyurethane solution adhesive under the steel base. Up to 4 damping mats are required for a proper installation: steel foundation without filling: 2 mats steel foundation with concrete filling: 3 mats steel foundation with concrete and steel filling: 4 mats

in stock

€102.99*

pcs

damping mat 700x150x25 mm

00660064

damping mat 700x150x25 mm for airhammer to be glued with polyurethane solution adhesive under the steel base. Up to 4 damping mats are required for a proper installation: steel foundation without filling: 2 mats steel foundation with concrete filling: 3 mats steel foundation with concrete and steel filling: 4 mats

in stock

€120.00*

pcs

flat die top part 40 mm, 25°

00668861.40.25

flat die top part 40 mm, 25° for spring hammer type Meitinger Rationell or Record 60x60 mm, height approx. 150 mm, high quality tool steel, properly hardened

Currently not available

€480.00*

Details

flat die bottom part for spring hammer

00668862

flat die bottom part for spring hammer type Meitinger Rationell or Record made from high quality tool steel, properly hardened

in stock

€390.00*

pcs

fullering die top part 40 mm, 0°

00668863.40.0

fullering die top part 40 mm, 0° for spring hammer type Meitinger Rationell or Record, height approx. 150 mm, 60 x 60 mm, high quality tool steel, properly hardened

Currently not available

€480.00*

Details

fullering die bottom part for spring hammer

00668864

fullering die bottom part for spring hammer type Meitinger Rationell or Record made from high quality tool steel, properly hardened

in stock

€495.00*

pcs

combination die top part for spring hammer

00668865.0

combination die top part for spring hammer type Meitinger Rationell or Record steel C65, hardened, drawing die and flat die.

Currently not available

€540.00*

Details

combination die (drawing / flat) bottom part

00668866

combination die (drawing / flat) bottom part for spring hammer type Meitinger Rationell or Record, made from high quality tool steel, properly hardened

Currently not available

€410.00*

Details

combination die top part for spring hammer

00668867.0

combination die top part for spring hammer type Meitinger Rationell or Record steel C65, hardened, flat die and fullering die (R=75 mm)

Currently not available

€540.00*

Details

combination die (flat/fullering) bottom part

00668868

combination die (flat/fullering) bottom part for spring hammer type Meitinger Rationell or Record, made from high quality tool steel, properly hardened, flat die and fullering die (R=75 mm)

Currently not available

€495.00*

Details

Drawing die top part 40 mm, 0°

00668869.40.0

Drawing die top part 40 mm, 0° for spring hammer type Meitinger Rationell or Record, height approx. 150 mm, width 60 mm, high quality tool steel, properly hardened

Currently not available

€480.00*

Details

large Drawing die top part 0°

00668870.0

large Drawing die top part 0° for spring hammer type Meitinger Rationell or Record, height approx. 150 mm, width 120 mm, high quality tool steel, properly hardened

Currently not available

€480.00*

Details

wedge for bottom die for spring hammer Meitinger

00668897

wedge for bottom die for spring hammer Meitinger type Rationell or Record two pieces needed

in stock

€24.00*

pcs

wedge for top die for spring hammer Meitinger

00668898

wedge for top die for spring hammer Meitinger type Rationell or Record one piece needed

in stock

€25.00*

pcs

Spring support

00669946

Spring support for setting up air hammer or spring hammer, 60 Shore, outer diameter 47 mm, inner diameter ~ 17 mm These buffer bearings are required for the vibration-free attachment of air forges or spring hammers to the floor/foundation. They ensure vibration-free fixation of the machine.

in stock

€14.90*

pcs