Skip to main content Skip to search Skip to main navigation
Menu

Spring hammers Meitinger

Filter products
damping mat 450x80x25 mm
00660061
  suitable for AN-15 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

€42.99*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
damping mat 510x150x25 mm
00660062
  suitable for AN-25 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

€91.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
damping mat 620x150x25 mm
00660063
  suitable for AN-40 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

€102.99*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
damping mat 700x150x25 mm
00660064
  suitable for AN-55 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

€120.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
flat die top part
00668861
  for spring hammer type Meitinger Rationell or Record 60x60 mm, height approx. 150 mm, high quality tool steel, properly hardened

From €480.00*
flat die bottom part for spring hammer
00668862
  type Meitinger Rationell or Record made from high quality tool steel, properly hardened

€390.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
fullering die top part
00668863
  for spring hammer type Meitinger Rationell or Record, height approx. 150 mm, 60 x 60 mm, high quality tool steel, properly hardened

From €480.00*
fullering die bottom part for spring hammer
00668864
  type Meitinger Rationell or Record made from high quality tool steel, properly hardened

€495.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
combination die top part for spring hammer
00668865
  type Meitinger Rationell or Record steel C65, hardened, drawing die and flat die.

From €540.00*
combination die (drawing / flat) bottom part
00668866
  for spring hammer type Meitinger Rationell or Record, made from high quality tool steel, properly hardened

€410.00*
combination die top part for spring hammer
00668867
  type Meitinger Rationell or Record steel C65, hardened, flat die and fullering die (R=75 mm)

From €540.00*
combination die (flat/fullering) bottom part
00668868
  for spring hammer type Meitinger Rationell or Record, made from high quality tool steel, properly hardened, flat die and fullering die (R=75 mm)

€495.00*
Drawing die top part
00668869
  for spring hammer type Meitinger Rationell or Record, height approx. 150 mm, width 60 mm, high quality tool steel, properly hardened

From €480.00*
large Drawing die top part
00668870
  for spring hammer type Meitinger Rationell or Record, height approx. 150 mm, width 120 mm, high quality tool steel, properly hardened

From €480.00*
wedge for bottom die for spring hammer Meitinger
00668897
  type Rationell or Record two pieces needed

€24.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
wedge for top die for spring hammer Meitinger
00668898
  type Rationell or Record one piece needed

€25.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs