Raw material

Forging

Coal forges Induction Gas forges Electric heating Smoke evacuation Anvils Forging tools Heavy tools Raw material Machinery Protective clothing Auxiliaries Miscellaneous Forging Set grinding and sharpening

Raw material

Forging iron Pure Iron tool steel Forging coal Raw material Non-ferrous metal

Raw material

There used to be a steel and coal dealer around the corner. Unfortunately, what works again at the corner shop and is making a comeback is not available for raw materials for forging.

We have a well-stocked steel warehouse with the most important steels. Specialties such as butter and pure iron are almost only available from us in smaller quantities.

You can get aluminum, bronze and tin by the kilo.

When it comes to forging coal and coke, we pay attention to the best quality and try to ensure this is consistent.

Forging iron

Pure Iron

tool steel

Forging coal

Raw material

Non-ferrous metal

Filter products

Reisinger

0,4 kg
0,8 kg
1,0 kg
4,2 kg
5,0 kg
5,4 kg
5,8 kg
5,9 kg
6,0 kg
6,1 kg
6,2 kg
6,3 kg
6,4 kg
6,5 kg
6,6 kg
6,7 kg
6,8 kg
6,9 kg
7,0 kg
7,1 kg
7,2 kg
7,3 kg
7,4 kg
7,5 kg
7,6 kg
7,7 kg
7,8 kg
7,9 kg
8,0 kg
8,1 kg
8,2 kg
8,3 kg
8,4 kg
8,5 kg
8,6 kg
8,7 kg
8,8 kg
8,9 kg
9,0 kg
9,1 kg
9,2 kg
9,3 kg
9,4 kg
9,5 kg
9,6 kg
9,7 kg
9,8 kg
9,9 kg
10,0 kg
10,1 kg
10,2 kg
10,3 kg
10,4 kg
10,5 kg
10,6 kg
10,7 kg
10,8 kg
10,9 kg
11,0 kg
11,1 kg
11,2 kg
11,3 kg
11,4 kg
11,5 kg
11,6 kg
11,7 kg
11,8 kg
12,0 kg
12,1 kg
12,2 kg
12,3 kg
12,4 kg
12,5 kg
12,6 kg
12,7 kg
12,8 kg
12,9 kg
13,0 kg
13,1 kg

30x2,0 mm
30x2,5 mm
30x3,0 mm
30x3,2 mm
30x3,5 mm
30x4,2 mm
30x4,5 mm
40x2,0 mm
40x2,5 mm
40x3,0 mm
40x3,2 mm
40x3,5 mm
40x4,2 mm
40x4,5 mm
50x2,0 mm
50x2,5 mm
50x3,0 mm
50x3,2 mm
50x3,5 mm
50x4,5 mm
60x2,5 mm
60x3,0 mm
60x3,5 mm
60x4,5 mm

1.0503

Flach
Quadrat
Rund

Minimum €

–

Maximum €

Special brass ECOCAST ® - cuts

36381002

Special brass ECOCAST ® - cuts #Varinfo lead-free (max. 0.02% Pb), heavy-duty special brass, good corrosion resistance and machinability. Ideal for cast parts by sand casting, permanent mold casting, low-pressure casting Advantages: high strength easy to cast easy to machine easy to cold and hot form corrosion-resistant recyclable lead-free We sell the brass in cut pieces of different sizes and weights. Dimensions range from approx. 70x60x40 to approx. 70x70x25 mm. The appearance may vary depending on the batch. Highly stable Its grain finer ensures an extremely fine grain. This enables an even distribution of forces across the entire structure. Result: strength and hardness even with thin, weight-reducing wall thicknesses, which are otherwise only known from steel. Better castability Due to its fine-grained structure, Ecocast is ideal for filigree components. Reduced waste Wherever you have previously had to rely on gunmetal for filigree shapes, the high waste of this conventional material is no longer necessary - with Ecocast. Excellent machinability Ecocast and its special chemical composition also make post-processing of cast parts safe, precise and economical by machining, grinding, polishing or coating. First-class corrosion resistance Fine-grained structure through and through - this also means minimal dezincification depth on the surface through contact, oxidation or cleaning. The future is lead-free Secure your advantage: With Ecocast, you can design and equip your products for tomorrow today. In many countries and for various customers, strict regulations on the use of lead-free materials already apply. Universal Ecocast can be cast in both ingot molds and sand. The material is standardized in EN 1982 under CC768S.

Content: 0.98 Kilogramm (€23.47* / 1 Kilogramm)

From €10.00*

ECOCAST ® brass

36381012

ECOCAST ® brass #Varinfo Wieland-SW3, CuZn21Si3 ECOCAST ® brass is sold in bars with about 11 kg Advantages: high strength easy to cast easy to machine easy to cold and hot form corrosion-resistant recyclable lead-free We sell the brass in bars of different sizes and weights. Dimensions and appearance can therefore vary depending on the batch. Highly stable Its grain finer ensures an extremely fine grain. This enables an even distribution of forces across the entire structure. Result: strength and hardness even with thin, weight-reducing wall thicknesses, which are otherwise only known from steel. Better castability Due to its fine-grained structure, Ecocast is ideal for filigree components. Reduced waste Wherever you have previously had to rely on gunmetal for filigree shapes, the high waste of this conventional material is no longer necessary - with Ecocast. Excellent machinability Ecocast and its special chemical composition also make post-processing of cast parts safe, precise and economical by machining, grinding, polishing or coating. First-class corrosion resistance Fine-grained structure through and through - this also means minimal dezincification depth on the surface through contact, oxidation or cleaning. The future is lead-free Secure your advantage: With Ecocast, you can design and equip your products for tomorrow today. In many countries and for various customers, strict regulations on the use of lead-free materials already apply. Universal Ecocast can be cast in both ingot molds and sand. The material is standardized in EN 1982 under CC768S.

Content: 11 Kilogramm (€19.50* / 1 Kilogramm)

From €91.96*

forging iron

37200105

carbon content approx. 0.03 % in pieces with length approx. 1 m surface slightly oxidised

From €5.30*

Pure iron

37210050

carbon content 0.01 % max. in pieces with length of about 1 m each

From €18.90*

pure iron, handrail 40x10 mm

37239141

pure iron, handrail 40x10 mm special production weight approx. 2.66 kg/m <br><i>We sell this pure iron in pieces with length of 1 m. Price is indicated for a piece with length of 1 m, including costs for cutting. Of course we also sell other dimensions (standard length is 3-4 m) and larger quantities. We will charge on a time and material basis - please ask for an offer.</i>

€39.00*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

pure iron, metal strip 1000 x 30 x 2 mm

37241023

pure iron, metal strip 1000 x 30 x 2 mm carbon content 0.01 % max. We sell this metal strip by piece. If you are interested in larger quantities (more than 25 pcs) or if you want smaller or bigger pieces we can cut them according to your needs - please specify quantity and length, we will make an special offer.

€6.90*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

pcs

loop, unforged

37292111

€190.00*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

Roll damascus steel (carbon)

37511025.1.3

by Balbach Damascus Forge approx. 160 layers, annealed and grinded - SuperClean-layer welds - Very fine grain - High edge holding - High hardening possible (up to 63 HRC)

Content: 0.01 Meter (€47,005.00* / 1 Meter)

From €3.99*

wild damascus stainless steel

37511025.2.1

by Balbach Damascus Forge approx. 135 layers, annealed and grinded - SuperClean-layer welds INOX stainless - Very fine grain - High edge holding - Fit for food contact - High hardening possible (up to 61 HRC) Fig. 3 shows a finished kitchen knife as an example.

Content: 0.01 Meter (€47,005.00* / 1 Meter)

From €3.99*

knife blank from damascus steel 75 mm

37511110

knife blank from damascus steel 75 mm ~ 75x20x3-3,5mm a quality product of the Balbach damascus forge

€49.90*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

pcs

knife blank from damascus steel 85 mm

37511111

knife blank from damascus steel 85 mm ~ 85 x 24,5 x 3-3,5 mm a quality product of the Balbach damascus forge

€59.00*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

pcs

knife blank from stainless damascus steel 85 mm

37511117

knife blank from stainless damascus steel 85 mm ~ 85 x 24,5 x 3-3,5 mm about 145 layers, made from Böhler N690 und Buderus Nitro B stickstofflegiert a quality product of the Balbach damascus forge

€64.90*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

pcs

hot work steel X40CrMoV5-1

37521100

hot work steel no. 1.2344 (US-AISI: H13) carbon content 0,37...0,43 %, for hardening in oil We sell this steel in pieces with length of 1 m. Price is indicated for a piece with length of 1 m, including costs for cutting. Of course we also sell other dimensions and larger quantities - please ask for an offer.

From €16.90*

60WCrV7,

37531100

cold work steel 60WCrV7 #Varinfo cold work steel no. 1.2550 carbon content 0,55...0,65 %, for hardening in oil We sell this steel in pieces with length of 1 m. Price is indicated for a piece with length of 1 m, including costs for cutting. Of course we also sell other dimensions and larger quantities - please ask for an offer.

From €44.90*

90MnCrV8

37532340

cold work steel no. 1.2842 carbon content 0,9 %, for hardening in oil We sell this steel in pieces with length of 1 m. Price is indicated for a piece with length of 1 m, including costs for cutting. Of course we also sell other dimensions and larger quantities. We will charge on a time and material basis - please ask for an offer.

From €39.90*

90MnCrV8, stripes

37532535

cold work steel no. 1.2842 carbon content 0,9 %, for hardening in oil Of course we also sell other dimensions and larger quantities. We will charge on a time and material basis - please ask for an offer.

From €2.80*

tool steel C45,

37541110

carbon content 0,42...0,5 %, for hardening in water We sell this steel in pieces with length of 1 m. Price is indicated for a piece with length of 1 m, including costs for cutting. Of course we also sell other dimensions and larger quantities. We will charge on a time and material basis - please ask for an offer.

From €22.00*

C60, square 60 x 60, 1.0601

37541760

C60, square 60 x 60, 1.0601 carbon content 0,57...0,65 %, for hardening in water or oil, weight approx. 28,26 kg/m We sell this steel in pieces with length of 1 m. Price is indicated for a piece with length of 1 m, including costs for cutting. Of course we also sell other dimensions and larger quantities. We will charge on a time and material basis - please ask for an offer.

Content: 28.26 Kilogramm (€10.26* / 1 Kilogramm)

€290.00*

Details

Knifesteel 12C27M Stripe

37542311

carbon content 0,52 %, for hardening in oil, similar 1.4034/1.4037 perfect for making kitchen knives Alleima® 12C27M, still produced in swedish Sandviken, is a martensitic stainless chromium steel developed for the manufacture of kitchen tools with high demands on wear- and corrosion resistance properties. After heat treatment the grade is characterized by: High hardness which gives good wear resistance. Good corrosion resistance Typical applications for Alleima® 12C27M are kitchen tools, such as different types of knives and scissors, that need to tolerate dish-washing.

From €5.90*

Knifesteel 10C28Mo2 stripe

37542331

carbon content 0,53 %, for hardening in oil perfect for making kitchen and outdoor knives Knife steel 10C28Mo2, still produced in swedish Sandviken, is a martensitic stainless chromium steel developed for razor blade and knife applications with high demands on corrosion resistance. The carefully chosen chemical composition in combination with a very fine microstructure also provides a high hardness, good edge retention, toughness and edges that are easy to re-sharpen. After heat treatment the grade is characterized by: Very good corrosion resistance High hardness which gives good wear resistance Good toughness Typical applications for 10C28Mo2 are kitchen knives and other tools where a dishwasher-safe material is required, professional butcher knives that need to be easily resharpened, outdoor knives, medical blades and razor blades, with high requirements on corrosion resistance and toughness.

From €5.90*

Aluminum for casting

39906015

AlMgSi 0,5, in small pieces ~ 40 x 30 x 8 mm Old car rims, jewelry or the like can be melted down, but you never know exactly what material you have in front of you. In many applications it is important to have a clean and homogeneous casting and for this it is important to use a base material that is as “pure” as possible. We sell the sections by weight (per kg). 42 strips correspond to approximately one kg. Picture 2 shows about 0.4 kg in a 2 kg crucible (the crucible is not included). The dimensions of the strips may vary.

€9.90*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

pure iron, metal strip 180 x 30 x 2 mm

37241022

carbon content 0.01 % max. (marked green) We sell this metal strip by piece. If you are interested in larger quantities (more than 25 pcs) or if you want smaller or bigger pieces we can cut them according to your needs - please specify quantity and length, we will make an special offer.

€2.20*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

pcs

damascus steel 300 layers

37511010

square 25x25 mm, piece with length about 100 mm made of tool steel and hardenable nickel steel, surface scaled, raw, annealed. A quality product of the Balbach damascus forge Length of the piece is about 100 mm (weight is about 0.5 kg). From such a piece you can forge a blade with about 400x40x4 mm. We can also deliver other patterns or sizes, please ask for an offer.

Content: 0.5 Kilogramm (€358.00* / 1 Kilogramm)

€179.00*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

pcs

wild damascus steel (carbon)

37511025.1.1

by Balbach Damascus Forge approx. 160 layers, annealed and grinded - SuperClean-layer welds - Very fine grain - High edge holding - High hardening possible (up to 63 HRC)

Content: 0.01 Meter (€47,005.00* / 1 Meter)

From €3.20*