Non-ferrous metal

Special brass ECOCAST ® - cuts 0,4 kg

36381002.0.4

Special brass ECOCAST ® - cuts 0,4 kg lead-free (max. 0.02% Pb), heavy-duty special brass, good corrosion resistance and machinability. Ideal for cast parts by sand casting, permanent mold casting, low-pressure casting Advantages: high strength easy to cast easy to machine easy to cold and hot form corrosion-resistant recyclable lead-free We sell the brass in cut pieces of different sizes and weights. Dimensions range from approx. 70x60x40 to approx. 70x70x25 mm. The appearance may vary depending on the batch.

Content: 0.98 Kilogramm (€10.20* / 1 Kilogramm)

Currently not available

€10.00*

Details

ECOCAST ® brass 9,5 kg

36381012.9.5

ECOCAST ® brass 9,5 kg Wieland-SW3, CuZn21Si3 ECOCAST ® brass is sold in bars with about 11 kg Advantages: high strength easy to cast easy to machine easy to cold and hot form corrosion-resistant recyclable lead-free We sell the brass in bars of different sizes and weights. Dimensions and appearance can therefore vary depending on the batch. Highly stable Its grain finer ensures an extremely fine grain. This enables an even distribution of forces across the entire structure. Result: strength and hardness even with thin, weight-reducing wall thicknesses, which are otherwise only known from steel. Better castability Due to its fine-grained structure, Ecocast is ideal for filigree components. Reduced waste Wherever you have previously had to rely on gunmetal for filigree shapes, the high waste of this conventional material is no longer necessary - with Ecocast. Excellent machinability Ecocast and its special chemical composition also make post-processing of cast parts safe, precise and economical by machining, grinding, polishing or coating. First-class corrosion resistance Fine-grained structure through and through - this also means minimal dezincification depth on the surface through contact, oxidation or cleaning. The future is lead-free Secure your advantage: With Ecocast, you can design and equip your products for tomorrow today. In many countries and for various customers, strict regulations on the use of lead-free materials already apply. Universal Ecocast can be cast in both ingot molds and sand. The material is standardized in EN 1982 under CC768S.

Content: 9.5 Kilogramm (€21.00* / 1 Kilogramm)

in stock

€199.50*

Details

Tin (Sn 99,9)

36620000

Tin (Sn 99,9) in pellets ~ 25 x 12 mm

in stock

€94.00*

kg

Aluminum for casting

39906015

Aluminum for casting AlMgSi 0,5, in small pieces ~ 40 x 30 x 8 mm Old car rims, jewelry or the like can be melted down, but you never know exactly what material you have in front of you. In many applications it is important to have a clean and homogeneous casting and for this it is important to use a base material that is as “pure” as possible. We sell the sections by weight (per kg). 42 strips correspond to approximately one kg. Picture 2 shows about 0.4 kg in a 2 kg crucible (the crucible is not included). The dimensions of the strips may vary.

in stock

€9.90*

kg