Thermal security
consisting of thermal security valve in and thermal sensor and capillary tube,
ca. 750 mm length of the capillary tube.
Gas-entry M 14x1,5 AG (for cutting ring fitting Ø 8 mm),
Gas-outlet M 14x1,5 IG (cutting ring fitting Ø 8 mm)
Suitable for Proforge, P-301 and P-302, and other gas forge furnaces.
The thermal monitoring device is part of the thermoelectric ignition safety device for gas-fired forge furnaces and, in the event of a malfunction, is designed to quickly prevent the escape of unburned gas.
Function:
The gas flame heats the tip of the thermocouple. This generates a thermal voltage, which is conducted through the copper wire to a holding magnet. Once sufficient voltage has been built up, the magnet holds the valve open. If combustion ceases, the tip of the thermocouple cools down, the thermal voltage is reduced, and the holding magnet closes the valve. The response time is between 10 and 60 seconds, depending on the design.
An essential safety device for all gas-fired forge furnaces. Also suitable for DIY construction!
Information on product safety:
- Use only for users familiar with the product.
- Only for the intended purpose.
- Improper use can lead to damage and injury. Please also note the safety instructions included with the product.
Importer/manufacturer/distributor (unless another manufacturer is explicitly mentioned for the article):
ANGELE GmbH | Ringstrasse 25 | 88416 Ochsenhausen | Germany
info@angele-shop.com