über 160 Jahre ...

Die Erfahrung vieler Jahrzehnte und das Bestreben, optimale Qualität zu liefern, führten zu unseren hohen Ansprüchen an die zu bearbeitenden Stähle und auch zur ständigen Weiterentwicklung der Verfahrenstechnik, speziell im Bereich Wärme- und Oberflächenbehandlung.

Neben modernen Fertigungsmaschinen steht in unserer Hammerfertigung mit ihrer vielfältigen Formgebung das fachliche Können unserer Mitarbeiter im Mittelpunkt, sei es im Werkzeugbau, beim Gesenkschmieden, bei der Wärmebehandlung oder beim Schleifen und Polieren.

Die Erfüllung aller vom Kunden an uns gestellten Anforderungen ist für uns oberstes Ziel. Dieses Ziel wird von jedem Mitarbeiter getragen und umgesetzt und stellt den Kernpunkt unserer Bestrebungen dar, nämlich den Anwender von Picard-Werkzeugen zufriedenzustellen, um ihm ein langfristiger Partner zu sein.

Text und Informationen stammen u.a. von der Homepage von PICARD GmbH

Angele blacksmith's apron CL half

00618069.00

Angele blacksmith's apron CL half solid but soft leather width ~ 60 cm, total length of hip belt ~ 140 cm, height of the apron ~ 74 cm, with 2 exterior pockets and an inside pocket Leather is a natural product. Color and hue are subject to change.

in stock

From €89.00* €99.00*

Tip

Angele blacksmith's apron CL

00618060.00

Angele blacksmith's apron CL solid but soft leather Leather is a natural product. We must therefore reserve the right to color deviations and color changes. Please note the size information in the Downloads tab!

in stock

From €99.00* €114.00*

60.1 %

Dictionary of Metal Design

00961066

Dictionary of Metal Design english-german by Ronald B. Wiles, 64 pages, dimensions 17 x 21 cm, black and white, many photos and drawings

in stock

€3.95* €9.90*

pcs

21.88 %

Tip

folder with 34 historical engravings

00966002

folder with 34 historical engravings about blacksmithing edited by Peter Elgass, 34 sheets, in folder, size 42 x 29 cm, reprint on precious paper

in stock

€35.00* €44.80*

pcs

25.74 %

folder with 50 historical engravings

00966001

folder with 50 historical engravings about blacksmithing edited by Peter Elgass, 50 sheets, in folder, size 42 x 29 cm, reprint on precious paper

in stock

€49.90* €67.20*

pcs

2.79 %

Forging Set 1

00561001

Forging Set 1 1x Blacksmith's 1,25 kg (541012) 1x Wolf's jaw tong 400 (538040) 1x Book "Schmieden lernen" (961110) - in German Blacksmith's hammer 1,25 kg is the ideal standard hammer. The weight of the head is a good mean. The ash handle fits comfortably in your hand. The Wolf's jaw tong 400 can be used universally for flat, round and square workpieces. This tong is ideal for 8mm workpieces, but you can also hold smaller and bigger ones. Please note: The book "Schmieden lernen" is in German!

in stock

€116.90* €120.25*

set

21.74 %

graphite crayon, pack with 12 pcs

00617142

graphite crayon, pack with 12 pcs ø 12 mm, length 120 mm perfect for designing and sketches

in stock

€9.00* €11.50*

pack

1.69 %

Induction heating device ISF7200

00171210

Induction heating device ISF7200 power 7.2 kW, 600kVA, Power connection 400V/3-ph, 16A, easy power control, operation with foot pedal, Dimensions approx. 550x350x250 mm (LxWxH), Cooling water requirement: 3-6 l/min, 3-6 bar, 15-35°C, Delivery incl. plug, foot pedal, inductor Ø 30 mm, packed in a sturdy wooden box. Device is sold without cooling 100% MADE in FRANCE Characteristics: fast, efficient heating Significantly lower costs than gas and coal selective heating possible low oxidation on the workpiece Possible to heat up to the melting point no suction necessary safe use developed and produced in France certified and tested according to European standards quick spool change easy handling robust design good spare parts availability Why no "cheap import" from China? There are inexpensive devices from the Far East, we know these devices, but strongly advise against them. Induction devices work with high voltage and large currents. Most cheap import devices do not have a real "CE" certification or tested design according to European standards. These devices work, but safe operation is not possible and, in addition to defects in the device, such as electric shock, short circuits and much more. serious accidents occur. Long-term health consequences can also occur with these devices. The efficiency of these devices is also not comparable, and the performance and service life of the power electronics are significantly lower.

in stock

€5,800.00* €5,900.00*

pcs

journal HEPHAISTOS

00968000

international magazine for metal design, in german language, 325x240 mm

in stock

From €2.00*

50 %

journal HEPHAISTOS - random output set

00968000.0000.01

journal HEPHAISTOS - random output set international magazine for metal design, in german language, 325x240 mm, Selection of all available titles, about 199 of 206 available journals Here we reach into the shelf and look for all - really ALL - available magazines (each available issue 1x)

in stock

€300.00* €600.00*

pcs