power 7.2 kW, 600kVA, Power connection 400V/3-ph, 16A, easy power control, operation with foot pedal, Dimensions approx. 550x350x250 mm (LxWxH), Cooling water requirement: 3-6 l/min, 3-6 bar, 15-35°C, Delivery incl. plug, foot pedal, inductor Ø 30 mm, packed in a sturdy wooden box.   Device is sold without cooling   100% MADE in FRANCE   Characteristics: fast, efficient heating Significantly lower costs than gas and coal selective heating possible low oxidation on the workpiece Possible to heat up to the melting point no suction necessary safe use developed and produced in France certified and tested according to European standards quick spool change easy handling robust design good spare parts availability     Why no "cheap import" from China? There are inexpensive devices from the Far East, we know these devices, but strongly advise against them. Induction devices work with high voltage and large currents. Most cheap import devices do not have a real "CE" certification or tested design according to European standards. These devices work, but safe operation is not possible and, in addition to defects in the device, such as electric shock, short circuits and much more. serious accidents occur. Long-term health consequences can also occur with these devices. The efficiency of these devices is also not comparable, and the performance and service life of the power electronics are significantly lower.

  Power 24kW, 1000kVA, Power connection 400V/3-ph, 32A, easy power control, operation with foot pedal, Dimensions approx. 300x450x300 mm (LxWxH), Cooling water requirement: 3-8 l/min, 3-6 bar, 15-35°C, Delivery incl. plug, foot pedal, inductor Ø 30 mm, packed in a sturdy wooden box.   Device is sold without cooling   100% MADE in FRANCE   Characteristics: fast, efficient heating Significantly lower costs than gas and coal selective heating possible low oxidation on the workpiece Possible to heat up to the melting point no suction necessary safe use developed and produced in France certified and tested according to European standards quick spool change easy handling robust design good spare parts availability     Why no "cheap import" from China? There are inexpensive devices from the Far East, we know these devices, but strongly advise against them. Induction devices work with high voltage and large currents. Most cheap import devices do not have a real "CE" certification or tested design according to European standards. These devices work, but safe operation is not possible and, in addition to defects in the device, such as electric shock, short circuits and much more. serious accidents occur. Long-term health consequences can also occur with these devices. The efficiency of these devices is also not comparable, and the performance and service life of the power electronics are significantly lower.

Copper pipe #Varinfo   Easily bendable copper tubing, ideal for making inductors. This means that coils for induction devices can be built quickly and easily.

Compression ferrule for copper pipe #Varinfo

Union nut #Varinfo

Pre-assembly stud #Varinfo for stainless steel, brass M, aluminium unions     The assembly socket is used to pre-assemble the clamping ring and the connecting nut onto the copper pipe. This ensures proper assembly and protects the connections on the device itself.   Instructions: Clamp the pre-assembly stud in a vise. Screw on the nut connection. Push the tube into the nut connection. Tighten the union nut approx. 1 1/2 turns with an open ended spanner (mechanical stop). Final assembly in the equipment approx. 1/4 turn.   Keep the flat metal surface clean.   Occasional lubrification of the thread and the flat metal surface facilitate pre-assembly.

Protective hose copper pipe #Varinfo Inside diameter approx. #Varinfo   High-temperature-resistant protective sleeve made of fiberglass/glass fiber.   To protect the copper tube of the induction coil from slag, sparks or melt.   The protective hose is crucial for optimal adhesion of the mortar and prevents the mortar from flaking off prematurely during later operation.

Glass fiber tape, #Varinfo approx. 0,1 mm thick   High temperature resistant fiberglass tape.   Prevents fraying when cutting the protective hose.

Cooling for induction device CHW26 2.6 kW cooling capacity, flow rate coolant 5-40 l/min, Delivery pressure 0.5 - 3.8 bar.   Suitable for the device ISF7200     100% MADE in Italy   Characteristics: reliable cooling of the device and the coils Industrial quality reliable supply of spare parts easy handling robust design

  5,6 kW cooling capacity, flow rate coolant 5-32 l/min, Delivery pressure 0.5 - 3.5 bar.   Suitable for the device ISF724000     100% MADE in Italy   Characteristics: reliable cooling of the device and the coils Industrial quality reliable supply of spare parts easy handling robust design

Refractory Mortar 1600 °C, #Varinfo for "plastering" the induction coil, Temperature resistant up to approx. 1600 °C   This mortar is ideal for protecting the induction coil. After covering the copper tube with a glass fiber tube, the finished coil is dipped into the mortar or "plastered" with it. This protects it from slag or melt and significantly increases its service life.   Characteristics: high adhesion thin layer thickness (approx.1-3 mm) easy processing high thermal shock resistance max. application temperature approx. 1600°C good resistance to borax or other fire welding agents   Scope of application: induction coil Repair work in stoves/hearths   Notice: Mixing ratio approx. 250 ml Water per 1 kg Refractory Mortar Attention, our refractory concrete (59104001) is not suitable for plastering the induction coil.