Spare parts AN
damping mat 450x80x25 mm
€42.99*
00660061
suitable for AN-15 or other air and spring hammers
These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.
Features:
Clean decoupling of the machine
Significantly reduced emissions
Improved smooth running
Increased machine service life
Durable material
Easy to attach (glue)
Quickly improve the installation situation
Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath.
We recommend:
Base unfilled: 2 strips
Base filled with concrete: 3 strips
Base filled with reinforced concrete: 4 strips
damping mat 510x150x25 mm
€91.00*
00660062
suitable for AN-25 or other air and spring hammers
These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.
Features:
Clean decoupling of the machine
Significantly reduced emissions
Improved smooth running
Increased machine service life
Durable material
Easy to attach (glue)
Quickly improve the installation situation
Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath.
We recommend:
Base unfilled: 2 strips
Base filled with concrete: 3 strips
Base filled with reinforced concrete: 4 strips
damping mat 620x150x25 mm
€102.99*
00660063
suitable for AN-40 or other air and spring hammers
These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.
Features:
Clean decoupling of the machine
Significantly reduced emissions
Improved smooth running
Increased machine service life
Durable material
Easy to attach (glue)
Quickly improve the installation situation
Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath.
We recommend:
Base unfilled: 2 strips
Base filled with concrete: 3 strips
Base filled with reinforced concrete: 4 strips
damping mat 700x150x25 mm
€120.00*
00660064
suitable for AN-55 or other air and spring hammers
These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.
Features:
Clean decoupling of the machine
Significantly reduced emissions
Improved smooth running
Increased machine service life
Durable material
Easy to attach (glue)
Quickly improve the installation situation
Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath.
We recommend:
Base unfilled: 2 strips
Base filled with concrete: 3 strips
Base filled with reinforced concrete: 4 strips
Air filter for AN-L powerhammer
€43.99*
00667820
Air filter for AN-L powerhammer
suitable for all AN-L air hammer models,
45° angled, with band clamp,
prevents the ingress of dirt and is rewashable.
V-Belt for AN
From
€19.00*
00667775
Special V-belt for air forge hammer #Varinfo
X pieces are required for the #Varinfo
The very robust and reinforced design is suitable for use in the forge or workshop.
The V-belts are used to transmit power to the motor and ensure that the machine runs optimally.
The V-belt tension and the condition of the V-belts should be checked regularly.
A V-belt change is necessary if the V-belt is porous or cracked. A squeaking noise can also be due to a defective V-belt.
Guide plate for
From
€49.00*
00667779
2x holes for countersunk screw,
with oil grooves,
2 pieces are required for a revision
Piston ring for airhammer AN
From
€61.00*
00667780
Piston ring for airhammer AN #Varinfo
set of two pieces, diameter ø mm