Discs

There are many grinding wheels on the market. But the old saying applies to this tool too:

If you buy cheap, you buy twice

We only have high-quality abrasives in our range, which not only score points for their higher removal rates and longer service lives.

We also know that everything runs smoothly during the production process, without the factory workers or the environment being harmed.

Back-Up-Pad disk fibre disc Ø125 mm

54211049

Back-Up-Pad disk fibre disc Ø125 mm with thread mount M14 and 5/8", suitable for fiber disc Cubitron, with clamping nut for fiber discs

in stock

€24.95*

pcs

Fiber disc Cubitron® grain

54211050

Fiber disc Cubitron® grain #Varinfo 982C Cubitron II fiber disc Ø 125 mm

in stock

From €3.20*

Flap grinding disc TRIMFIX® BLACK MAMBA®

92121000

Flap grinding disc TRIMFIX® BLACK MAMBA® #Varinfo High-performance flap grinding disc provides an exceptionally long service life and material removal on steel and stainless steel

in stock

From €2.62*

Flap grinding disc MAGNUM® Ceramic

92121020

Flap grinding disc MAGNUM® Ceramic #Varinfo 125 x 22,2 mm High-performance ceramic flap grinding disc provides an exceptionally long service life and material removal on steel and stainless steel

in stock

From €4.86*

MAGNUM® CLEAN-PLUS disc

92121040

MAGNUM® CLEAN-PLUS disc Ø 125 x M14 Cleans all materials pore-deep, adapts ideally to all workpieces, does not smear and leaves a shiny surface like after sandblasting, without changing the dimensional accuracy (even thin sheets can be processed without any problems without grinding them through). Features: Material thickness approx. 15 mm. Cleans all materials such as metals, stone, plastics, wood (boards and planks) deep into the pores. Works like sandblasting without damaging the base. Also removes rust, oxide, paints, Teroson and much more Grain-filled nylon fleece fabric, elastic for better workpiece adaptation. Large area of fabric for significantly reduced processing times for cleaning, cleaning, cleaning, paint stripping, rust removal, oxide removal, etc. Ideal speed 2.000 - 4.500 min-1. Maximum speed 4.500 min-1 (30 m/sec in according to EN13743). For the first time, the ingenious carrier plate enables the hard fleece components to be applied over a large area - for less wear and thus over 50% longer service life. Elastic natural fiber high-tech compound carrier plate protects the environment and users (CO2-neutral), completely trimmable for complete use of the pane, noise and vibration dampening with practical M14 thread, for tool-free, lightning-fast mounting of panes. The integrated M14 thread makes it much easier to change the washer and no clamping nut is required - no risk of contamination from the workpiece touching the steel clamping nut. Note: Replaces the MAGNUM® CLEAN with clear advantages in tool life and stock removal rate.

in stock

€8.90*

pcs

Fleece disc MAGNUM® Vlies Top

92121100

Fleece disc MAGNUM® Vlies Top #Varinfo ø 115 mm x 22,2 mm, ideal range 2.000 - 5.000 rpm Perfect for smoothing tool surfaces - replaces wire brushes, abrasive paper and abrasive rubber. For metalworking jobs such as grinding, fine grinding, smoothing and polishing also for removing scale, oxides, scratches, rust, burr and paint. Furthermore, it cleans and smooths wood and plastics.

in stock

From €8.90*

high-performance cutting disc MAGNUM® Finecut

92121150

high-performance cutting disc MAGNUM® Finecut #Varinfo max. range 13300 Special high-performance cutting disc for thin-walled proﬁles and pipes and premium quality job. Features: · Extremely precise cuts possible with a disc thickness of only 1 mm · Ideal for all metals - simplifies material procurement and warehousing

in stock

From €1.49*

Premium rough grinding disc MAGNUM® FLEXO

92121160

Premium rough grinding disc MAGNUM® FLEXO Ø 125 x 22,2 mm, 6.0 mm thickness The outstanding features of this universal rough grinding disc are its great aggressiveness, long service life, and material removal performance. Ideal for stainless steel. Best suited for difficult deburring jobs. Features: · For all metals - simplifies material procurement and warehousing · Huge working time savings through significantly less disc change

in stock

From €2.03*