Skip to main content Skip to search Skip to main navigation
Menu

FORGE Peter Reisinger

Peter Reisinger, born in 1979, grew up with the blacksmith trade in his father's business. He passed the master blacksmith examination with distinction in 2002. He has always been keen to design and carry out the blacksmithing work himself. The roots of the blacksmith trade in the Reisinger family go back to 1641. The knowledge passed down from generation to generation and the new possibilities of metal design are implemented and implemented.

In the Reisinger forge, tradition is preserved and at the same time always strives for something new. This combination of old and new is a guarantee for constant further development. The Reisinger forge is located in Reichenstein/Upper Austria, in the heart of the lower Mühlviertel. The family business combines tradition and innovation in a modernly equipped forge.

On the basis of “small and fine”, high-quality work is carried out in the autonomous forge.
Giving the hot iron the desired character with imagination and willpower and thus creating memories and uniqueness for generations to come is his motivation. Every work is a personal one-off, with the head and the heart, holistically thought through. Perfection, quality and the language of religious-spiritual symbolism guide his daily work and keep it alive.

Text and information come from Peter | www.schmiede-reisinger.at, as of April 2019

Ali Andress - Zu Gast in der Schmiede Reisinger

"Peter Reisinger, geboren 1979, wuchs mit dem Schmiedehandwerk im väterlichen Betrieb auf. Die Schmiedemeisterprüfung legte er 2002 mit Auszeichnung ab.
Seit je her ist es ihm ein Anliegen, die Schmiedearbeiten selber zu gestalten und auszuführen. Die Wurzeln des Schmiedehandwerks in der Familie Reisinger gehen bis 1641. Das von Generation zu Generation weitergegebene Wissen und die neuen Möglichkeiten der Metallgestaltung werden ein- und umgesetzt.[...]"

(Kommentar, YouTube , Stand: 20.01.2025 )

Skip product gallery
Ball swage concave
00517135
  forged of tool steel, diameter #Varinfo shaft approx. 25x25 mm, for fixation in the anvil.   other diameters on request

in stock

From €72.00*
Ball swage convex
00517130
  forged of tool steel, diameter #Varinfo shaft approx. 25x25 mm, for fixation in the anvil.   other diameters on request

in stock

From €90.00*
Diagonal Punch for square hole
00518724
  handforged from high quality steel W303, forged diagonal, smoothed and polished by hand   Features: Forged from hot-work steel W303 Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

Available in 30 days, delivery time 1-3 days

From €55.00*
Hole split chisel
00518712
  forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, width of cutting edge ~ 20 mm, for holes XXxXX mm or ØXX mm   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

Available in 30 days, delivery time 1-3 days

From €61.00*
Punch for axes
00518728
  forged of quality hot work steel W303, smoothed, length about 490 mm, for punching holes according to DIN.   Properties: Forged from hot-work steel W303 Oil-hardened and tempered Ground and polished Long service life Very good heat resistance     This forged tool enables simple punching and thorning of blanks according to DIN. The thorn is forged and ground in such a way that the different "eye measurements" of the axe head are reflected on the different lengths of the thorn. This makes it easy to thorn and you get the desired eye measurement to match the standard axe handles with great repeatability.   These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you would like to find out more about Peter Reisinger and his family business, you can find further information here: HYPERLINK "https://angele-shop.com/pages/reisinger".

in stock

€229.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
Punch for hammers
00518726
  forged of quality hot work steel W303, smoothed, length about 280 mm, for punching holes according to DIN.   Properties: Forged from hot-work steel W303 Oil-hardened and tempered Ground and polished Long service life Very good heat resistance   This forged tool enables easy punching and thorning of blanks according to DIN. The thorn is forged and ground in such a way that the different "eye measurements" of the hammer head are reflected on the different lengths of the thorn. This makes thorning easy and you get the desired eye measurement to match the hammer handles with great repeatability.   Figure 2 shows the hammer thorn and a hammer blank forged with it. The hammer blank is not included in the scope of delivery.   These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria to the highest quality standards.   ...and if you would like to find out more about Peter Reisinger and his family business, you can find further information here HYPERLINK "https://angele-shop.com/pages/reisinger".

Available in 30 days, delivery time 1-3 days

€159.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
Punch for hatchets
00518727
  forged of quality hot work steel W303, smoothed, length about 450 mm, for punching holes according to DIN.   Properties: Forged from hot-work steel W303 Oil-hardened and tempered Ground and polished Long service life Very good heat resistance   This forged tool enables simple punching and thorning of blanks in accordance with DIN. The thorn is forged and ground in such a way that the different "eye measurements" of the axe head are reflected on the different lengths of the thorn. This makes it easy to thorn and you get the desired eye measurement to match the standard axe handles with great repeatability.   These special tools are forged by hand in the Reisinger forge in the heart of the lower Mühlviertel in Austria to the highest quality standards.   ...and if you would like to find out more about Peter Reisinger and his family business, you can find further information here: HYPERLINK "https://angele-shop.com/pages/reisinger".

Available in 30 days, delivery time 1-3 days

€169.00*
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
pcs
Punch for square holes
00518722
  handforged from high quality steel W303, forged, smoothed and polished by hand, Length approx. 120 mm   Features: Forged from hot-work steel W303 Oil-hardened and tempered Ground and polished Special geometry     These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

Available in 30 days, delivery time 1-3 days

From €38.00*
Punch round
00518716
  forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, for holes X mm   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

Available in 30 days, delivery time 1-3 days

From €55.00*
Punch square
00518714
  forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, for square holes XxX mm   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

Available in 30 days, delivery time 1-3 days

From €55.00*