Accessories for anvils

round magnet ø 80 x 18 mm

00429014

round magnet ø 80 x 18 mm with hole ø 6,5 mm For fixation on an anvil for noise reduction Some anvils are “ringing” very loudly. You can often avoid this unpleasant noise by positioning it differently (on wood, in the sand, etc.). An alternative is to attach a strong magnet to the anvil, which changes the vibration properties and can therefore also positively change the sound. Note: Magnets produce a far-reaching, strong magnetic field. Do nothing magnetic in the near of cardiac pacemakers and implanted defibrillators or magnetic hard drive.

in stock

€30.00*

pcs

round magnet ø 100 x 22 mm

00429015

round magnet ø 100 x 22 mm with hole ø 10,5 mm For fixation on an anvil for noise reduction Some anvils are “ringing” very loudly. You can often avoid this unpleasant noise by positioning it differently (on wood, in the sand, etc.). An alternative is to attach a strong magnet to the anvil, which changes the vibration properties and can therefore also positively change the sound. Note: Magnets produce a far-reaching, strong magnetic field. Do nothing magnetic in the near of cardiac pacemakers and implanted defibrillators or magnetic hard drive.

in stock

€41.00*

pcs

Tip

Anvil protective pad

00518509

Anvil protective pad made of aluminium, approx. 160 x 80 x 8 mm It stands to reason that when two forces come together one or the other will show the result of the immpact.... When these marks of the impact are left in the anvil, it is annoying. Sharp, hard and pointed tools can leave marks on the anvil. For this reason, the protective pad is used when splitting, punching, and much more - shortly before piercing the workpiece - between the anvil and the workpiece to protect the path of the anvil. This pad is easier and cheaper to replace than the whole anvil...

in stock

€5.00*

pcs

Holdfast

00554090

Holdfast suitable for anvil holes from approx. 20 mm, approx. 170 mm total length This tool is perfect for clamping workpieces directly onto the anvil. The size of tool is suitable for anvils from 20 kg and shaft clamps securely in the square hole. Workpieces up to a thickness of approx. 40 mm can be clamped.

in stock

€30.00*

pcs