suitable for AN-15 or other air and spring hammers
These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.
Features:
Clean decoupling of the machine
Significantly reduced emissions
Improved smooth running
Increased machine service life
Durable material
Easy to attach (glue)
Quickly improve the installation situation
Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath.
We recommend:
Base unfilled: 2 strips
Base filled with concrete: 3 strips
Base filled with reinforced concrete: 4 strips
suitable for AN-25 or other air and spring hammers
These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.
Features:
Clean decoupling of the machine
Significantly reduced emissions
Improved smooth running
Increased machine service life
Durable material
Easy to attach (glue)
Quickly improve the installation situation
Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath.
We recommend:
Base unfilled: 2 strips
Base filled with concrete: 3 strips
Base filled with reinforced concrete: 4 strips
suitable for AN-40 or other air and spring hammers
These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.
Features:
Clean decoupling of the machine
Significantly reduced emissions
Improved smooth running
Increased machine service life
Durable material
Easy to attach (glue)
Quickly improve the installation situation
Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath.
We recommend:
Base unfilled: 2 strips
Base filled with concrete: 3 strips
Base filled with reinforced concrete: 4 strips
suitable for AN-55 or other air and spring hammers
These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.
Features:
Clean decoupling of the machine
Significantly reduced emissions
Improved smooth running
Increased machine service life
Durable material
Easy to attach (glue)
Quickly improve the installation situation
Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath.
We recommend:
Base unfilled: 2 strips
Base filled with concrete: 3 strips
Base filled with reinforced concrete: 4 strips
oil gun
for Kuhn airhammer K-CF
Technical specifications:
Volume (ml): 150
Flow rate (cm³/stroke): 0.5
Media: Oil, petroleum, aerosols and oils with additives
Housing: steel, powder-coated
Mouthpiece: pointed and hollow/universal mouthpiece
Connection thread: for tapered and ball grease nipples, DIN 71412,
DIN 3402, for funnel type grease nipples, DIN 3405
Maximum pressure (bar): 150
Dimensions ØxL (mm): 40 x 230
Weight (kg): 0.25
Oil for powerhammer - SAE30
mineral lubricating oil,
suitable for AN, Kuhn, Say-Mak.
Also suitable for other powerhammers.
perfect for power forging hammers
excellent formation of oil mist
very good adhesion
good protection against corrosion
This single-grade engine oil with a high viscosity index is made from extremely aging-resistant solvent raffinates as base oil and optimally selected active ingredients.
Due to its specific properties, the oil is particularly intended for use in machines under extreme operating conditions.
€8.90*
This website uses cookies to ensure the best experience possible. More information...