blacksmith's apron canvas with waist protection cracked  leather w x h approx. 80 x 100 cm

  special rubber, heat protection up to 200°C contact heat, cutt protection, grey, Size 10, approx. 34 cm total length   The soft protective felt offers heat protection up to approx. 200°C contact heat, at the same time effective protection against cuts, abrasion and burrs.

    Please note: Two images show the glasses with a clip attached, this clip is available as an accessory (# 618256) and is not included.

    Ideal for FIRE WELDING!   Effective protection for the eyes from UV and IR rays and from glare (protection level WE3).   Note: Inadequate protection against laser radiation!   One illustration shows the glasses with the clip attached. The glasses are available individually and are not part of the delivery scope of the displayed item 618256.

  without collar, short sleeve, with front pocket, twisted yarn, 100 %  cotton, hard wearing, washable at 60°C Please note that the shirts are relatively large - you can find more information about sizes in the next tab (Downloads).

  without collar, long arm, buttons on half the length, twisted yarn, 100 % cotton, hard wearing, washable at 60°C

  cuff made of grey flame retardant fabric

Working glove for children soft goat leather, cuff made of grey flame retardant fabric

  bend leather, cuff made of grey flame retardant fabric, Size S

heat protection mittens made from Kevlar® / Paraaramid up to 500 °C contact heat, very resistant, usable on both sides, approx. 30cm total length

  made from Aramid®, Contact heat up to 500 °C, 4 layer construction, extremely good heat insulation on the palms of the hands, very good protection against radiant heat, very good abrasion resistance on the palms of the hands. approx. 450 mm total length.   The glove for professionals!   Protective gloves against thermal risks according to EN 407:2020   For longer service lives when it comes to contact heat, we use selected materials and different insulation layers, especially in the area of the palm, so that protection against heat up to 500 °C is achieved. High resistance to radiant heat and splashes of molten metal is achieved primarily through the use of aluminized materials.

heat protection mittens 5 Finger made of 100% meta para aramid, excellent heat protection, up to 350 °C contact heat, usable on both sides, size 10     Characteristics: 5-finger heat protection glove 100% Meta Para Aramid in black additional knit lining can be used on both sides thanks to applied silicone nubs approx. 30 cm, knitted waistband, circular knit - seamless very good heat insulation very good skin tolerance due to cotton on the inside, using double knit good cut and heat protection recommended max. contact heat temperature: 350°C suitable for working with warm to hot objects

Visor for eye protection

Heat protection helmet Professional quality made of phenolic textile synthetic resin, very good heat resistance, for a short period over 1000 °C, extremely light and comfortable to wear   High quality - Made in GERMANY with special properties: Dimensionally stable at high temperatures High penetration resistance and impact strength High lateral rigidity Insensitive to chemicals High ageing stability (long service life) High wearing comfort and secure fit through ergonomically formed, height-adjustable suspension

Ear protectors for kids (blue) high quality, SNR 26 dB   Many of our customers tell us with bright eyes how they used to help their grandfather in the smithy as children. Even today, the children enjoy being there and getting involved. But eyes, ears and hands should be well protected...  

Neon Earplugs made from polyurethane foam material high quality, SNR 36 dB

  suitable for full face mask BLS5000, protection against scratches, dirt, paint, and much more.   By using a protective film, the viewing window on full-face respiratory masks can be protected from splashes of chemicals or paint mist when painting. The films are stuck onto the viewing window (similar to a screen protector on a mobile phone). If the films become dirty after use, they can simply be replaced. The viewing window of the full-face respiratory mask remains protected and extends the life of the respiratory mask.   Properties: Ideal for sanding or painting Protects the full-face goggles from scratches in the field of vision Quick, easy change Clear vision Good resistance to dust, paint, and much more.

  strong leather (~ 2 mm) w x h approx. 50 x 65 cm   The models and girls in the pictures are 13 and 11 years old respectively.   Please note: Leather is a natural product. Color and hue are subject to change.   Picture No.3 shows part of the color spectrum of the aprons. If you have a specific color request, please write it in the comment field at the end of the order. We are happy to take this into account - provided we have stock.

  strong leather w x h approx. 70 x 90 cm Please note: Leather is a natural product. Color and hue are subject to change.

  standard leather, approx. 80 x 100 cm.   This is a cheap entry-level apron that offers good protection by forging or similar work.

  shatter-proof polycarbonate lenses, wide flexible textile strap ensures a firm fit, for a very wide range of applications: Liquids / Dust / Molten metal

  without collar, long arm, buttons on half the length, with front pocket, twisted yarn, 100 %  cotton, hard wearing, washable at 60°C   Original work fabric for blacksmiths and metalworkers.   This fabric is particularly durable. The use of double-threaded yarn combined with an extremely dense weaving technique provides perfect protection against heat and sparks, while remaining comfortable to wear even during physical labor.   The blacksmith shirts can be washed at up to 60°C. Soak the garment in cold water for 12 hours before the first wash to ensure the fabric does not shrink by more than 2%. The colors are colorfast and will not bleed. Make sure the detergent does not contain bleach. Do not tumble dry.   Please note that the shirts run relatively large – usually one size smaller than the "regular" size fits (see also the next tab, Downloads).   Produced from materials tested for harmful substances · Manufactured in environmentally friendly facilities using resources efficiently · Manufactured in socially acceptable, safe workplaces · Meets both STANDARD 100 by OEKO-TEX® and STeP by OEKO-TEX®   bluesign® APPROVED · Sustainable treatment of people and the environment through safe processes and components throughout the entire production chain     Please note that the shirts are relatively large - you can find more information about sizes in the next tab (Downloads).

  made of kevlar®, approx. 35 cm in length, tube, cut level 3, contact heat level 1, Category II EN 388:2016 level 133XB EN 407 level X1XXXX   finely knitted, good additional cut and heat protection, respiration-active and tight-fitting, good wearing comfort

  side splitt cowhide leather approx. 60 x 100 cm, thickness > 1 mm Certified according EN ISO 11611:2015 CLASS 2/A1+A2   Leather is a natural product. Color and hue are subject to change.