grinding and sharpening

If you can't forge, you should be able to grind

or something like that... For the perfect finishing, the forged tools, knives or workpieces should be grinded. We have a small selection of the most important machines and tools for this. Here we differentiate between:

Belt grinder with sanding belt
Wet grinder with whetstone

Belt grinders

Wet grinding system

Discs

Grinding tools

Knife grinding holder

00561200

Knife grinding holder for fixing blades when grinding, Ensuring a perfect grinding angle, adjustable without tools approx. 200 mm total width. This knife sharpening aid enables easy and repeatable grinding/sharpening of knives and blades. Made of aluminum, with sturdy die-cast hinges and freely adjustable angle from 0°-30°, any required blade angle can be adjusted. The flexible hole pattern also enables complex geometries to be clamped. Using knurled screws and quick releases, the grinding aid can be adapted to the geometry of the part to be ground without tools. Stable handles and special slideways on the underside enable a secure hold when sanding and easy gliding on the sanding table. With a width of approx. 200mm, small and large blades can be ideally fixed. Features: quick, tool-free adjustment to the blade geometry flexible adjustment using hole grid/elongated holes secure fixation of the blade play-free adjustment and fixation Angle freely adjustable from 0°-30 made from aluminum Robust hinges made of die-cast perfect handling safe grinding side notches to check the angle Dimensions: approx. 200 mm wide approx. 90 mm high approx. 120 mm depth Notice: When sanding for the first time, the terminal strip may be slightly sanded down, which has no effect on its function. The blade shown is not included in the scope of delivery.

in stock

€169.00*

pcs

Belt grinder RadiusMaster RM 48 (230 V)

00672100

Belt grinder RadiusMaster RM 48 (230 V) single phase 230 V, 50 Hz, 1,5 kW, with five different rolls, diameters (203, 90, 50, 38, 25 mm), quick and easy adjustable in horizontal / vertical direction, multi-station belt grinder for belts 1220 x 50 mm (2x48"), Belt speed approx. 62 ft/s equals 18 m/s Mounting foot (350 x 350 mm) for attachment on the floor included, incl. support table "horizontal" and standard support table. Properties: powerful drive quick tool-free roll change tiltable fast sanding belt change (1220 x 50 mm) Tape rolls: 203, 90, 50, 38, 25 mm incl. support table "horizontal" incl. support table with "recess" adjustable With the RadiusMaster, we offer a universal belt grinder that was developed by a practitioner for practitioners and is characterized by exceptional versatility. The machine produced in Australia has proven itself for decades - and the details are constantly being improved and optimized. The Radius Master provides a multitude of uses selected by using an easy to operate index knob. Instantly available is a choice of contact wheel grinding, flat and edge grinding and slack belt grinding. The five contact wheels are brought into position by simply actuating an index knob and rotating in seconds to the desired position. The wheel diameters are 25mm, 38mm, 50mm, 89mm and 203mm. All guards swivel out of position for easy access. The various radii can be easily and quickly brought into the optimal working position with a quick clamp. In addition, the machine can be adjusted in several stages between horizontal and vertical alignment in just a few simple steps. You can find more videos (in English) on the versatile uses of the Radius Master on the manufacturer's website: https://www.radiusmaster.com.au

in stock

€2,518.00*

pcs

Belt grinder RadiusMaster RM 48, Variable Speed

00672101

Belt grinder RadiusMaster RM 48, Variable Speed with five different rolls, diameters (203, 90, 50, 38, 25 mm), quick and easy adjustable in horizontal / vertical direction, multi-station belt grinder for belts 1220 x 50 mm (2x48"), Belt speed: variable Speed - 3.6 to 19.2 m/s (at around 1500 rpm, motor adjustable from 300 to around 1600 rpm) motor three phase, 50 Hz, 1,5 kW, speed variation with frequency inverter, input single phase 50/60 Hz, 200-240 Volt livré avec pied simple 350 x 350 mm pour fixation au sol, avec compris table de support "horizontale" et "standard" Properties: powerful drive quick tool-free roll change tiltable fast sanding belt change (1220 x 50 mm) Tape rolls: 203, 90, 50, 38, 25 mm incl. support table "horizontal" incl. support table with "recess" adjustable With the RadiusMaster, we offer a universal belt grinder that was developed by a practitioner for practitioners and is characterized by exceptional versatility. The machine produced in Australia has proven itself for decades - and the details are constantly being improved and optimized. The Radius Master provides a multitude of uses selected by using an easy to operate index knob. Instantly available is a choice of contact wheel grinding, flat and edge grinding and slack belt grinding. The five contact wheels are brought into position by simply actuating an index knob and rotating in seconds to the desired position. The wheel diameters are 25mm, 38mm, 50mm, 89mm and 203mm. All guards swivel out of position for easy access. The various radii can be easily and quickly brought into the optimal working position with a quick clamp. In addition, the machine can be adjusted in several stages between horizontal and vertical alignment in just a few simple steps. You can find more videos (in English) on the versatile uses of the Radius Master on the manufacturer's website: https://www.radiusmaster.com.au

in stock

€3,590.00*

pcs

belt grinder RadiusMaster RM 48 D (400 V)

00672103

belt grinder RadiusMaster RM 48 D (400 V) 3-phase 3x400 V, 50 Hz, 1,5 kW, with five different rolls, diameters (203, 90, 50, 38, 25 mm), quick and easy adjustable in horizontal / vertical direction, multi-station belt grinder for belts 1220 x 50 mm (2x48"), Belt speed approx. 62 ft/s equals 18 m/s Mounting foot (350 x 350 mm) for attachment on the floor included, incl. support table "horizontal" and standard support table. Properties: powerful drive quick tool-free roll change tiltable fast sanding belt change (1220 x 50 mm) Tape rolls: 203, 90, 50, 38, 25 mm incl. support table "horizontal" incl. support table with "recess" adjustable With the RadiusMaster, we offer a universal belt grinder that was developed by a practitioner for practitioners and is characterized by exceptional versatility. The machine produced in Australia has proven itself for decades - and the details are constantly being improved and optimized. The Radius Master provides a multitude of uses selected by using an easy to operate index knob. Instantly available is a choice of contact wheel grinding, flat and edge grinding and slack belt grinding. The five contact wheels are brought into position by simply actuating an index knob and rotating in seconds to the desired position. The wheel diameters are 25mm, 38mm, 50mm, 89mm and 203mm. All guards swivel out of position for easy access. The various radii can be easily and quickly brought into the optimal working position with a quick clamp. In addition, the machine can be adjusted in several stages between horizontal and vertical alignment in just a few simple steps. You can find more videos (in English) on the versatile uses of the Radius Master on the manufacturer's website: https://www.radiusmaster.com.au

in stock

€2,708.00*

pcs

base board for RadiusMaster

00672106

base board for RadiusMaster Dimensions 625x460x8 mm heavy-duty made from steel, powder-coated, with 2 rolls for easy moving in the workshop

in stock

€230.00*

pcs

Mounting plate

00672108

Mounting plate for RadiusMaster for adjustable tool rest (672109) or hollow grinding jig (672110)

in stock

€62.00*

pcs

adjustable drive wheel tool rest

00672109

adjustable drive wheel tool rest for RadiusMaster Once the mounting plate (optional accessory #672108) is installed under motor base this adjustable tool rest can be fitted or removed in 5 seconds or less. It allows heavy metal removal much faster and smoother than grinding against the steel platen. Rest is adjustable to keep edge of different thickness materials square or any angle down to 45º. No tools needed for adjustment.

in stock

€184.00*

pcs

hollow grinding jig without mounting plate

00672110

hollow grinding jig without mounting plate for RadiusMaster optional accessory: mounting plate #672108

in stock

€349.00*

pcs

Platen table for square edge grinding

00672112

Platen table for square edge grinding for RadiusMaster

in stock

€98.00*

pcs

spare wheel 25 mm dia.

00672113

spare wheel 25 mm dia. for RadiusMaster

in stock

€81.00*

Details

Roller carrier for Radiusmaster

00672125

Roller carrier for Radiusmaster Mounting plates including new roller set, Ø 25mm, 38mm, 50mm

in stock

€471.00*

pcs

spare switch for RadiusMaster red/yellow

00672151

spare switch for RadiusMaster red/yellow

in stock

€26.00*

pcs

spare switch for RadiusMaster (black)

00672152

spare switch for RadiusMaster (black)

in stock

€26.00*

pcs

Speed control for Radius Master 400V - 230V/1-ph

00672165.230

Speed control for Radius Master 400V - 230V/1-ph contains: - Frequency converter - Connection cable 2 m including plug - shielded cable 2 m Mounted and parameterized ready to plug in - "Plug and Play" With this set you can turn the three-phase Radiusmaster (400V/3-ph) into a speed-adjustable belt sander. Enables delicate, precise and slow grinding, sharpening or polishing of knives or other workpieces. Advantages: adjustable belt speed Belt speed approx. 3.6 to 19.2 m/s robust IP66 design Why the expensive solution? The speed of an electric motor can be controlled with a frequency converter. This means that the speed of belt-grinder can be adapted to the current situation. Advantages of using an FU: Increasing energy efficiency (savings) Reduced wear of components Lower starting currents Frequency converter instead of speed controller: A frequency converter changes the frequency of the current and thus the speed of the rotating field - ideal for speed control. The technically clean solution ensures lower power consumption. A simple “dimmer” for incandescent lamps is often used as an inexpensive speed controller. These “dimmers” do nothing other than not allowing a certain part of the sine curve to pass through. “Dimmers” cut the phase on or off. There is a lot of slip and the speed fluctuates greatly. With this method, the overall efficiency drops significantly and almost as much electricity is required as in nominal operation. Furthermore, the engine will wear out more quickly. Available in 2 variants for 230V/1ph or 400V/3-ph input voltage. Not suitable for Radiusmaster 230V/1-ph.

Available in 30 days, delivery time 1-3 days

€890.00*

Details

capture device for RadiusMaster

00672190

capture device for RadiusMaster for connecting an industrial vacuum cleaner. consisting: high-strength, flexible hose ø 80 mm made of stainless steel, length approx. 900 mm adapter for connecting an industrial vacuum cleaner ø 61.5 mm stand with height-adjustable bracket Suction unit with flexible segment hose made of stainless steel. Connects to a central vacuum system or an industrial vacuum. Please observe the relevant safety instructions for your industrial vacuum cleaner regarding the risk of explosion and fire.

in stock

€177.00*

pcs

Tip

Knife and tool grinder NTS 255

00672360

Knife and tool grinder NTS 255 Compact water-cooled grinding system for various tools 230 volts, 1ph, 50Hz, 200W Delivery complete with: peeling paste angle gauge Universal grinder Fine corundum sharpening stone K 220 Leather honing wheel Characteristics: precise grinding result Fine corundum grinding stone for tools with a hardness of over 60HRC powerful induction motor for quiet and low-vibration work powder-coated steel housing extensive accessories unbreakable water tank Splashproof motor Removable leather honing wheel for honing off grinding burrs after sharpening Angle gauge for setting the correct grinding angle This grinder is ideal for home or hobby use, as well as for professionals with limited space. It offers outstanding quality and allows knives, scissors, lawnmower blades and chisels to be sharpened quickly and safely. Thanks to the extensive jig system, you can sharpen almost any cutting tool more precisely than when it was new. The universal support ensures precise repeatability, while the leather honing wheel delivers razor-sharp results. The compact design of this grinder offers high stability and the universal support guides all jigs and accessories for unbeatable precision.

in stock

€269.00*

pcs

Household set for NTS 255

00672362

Household set for NTS 255 Devices for sharpening many common household tools, for a precise grinding result. Delivery complete with: For knives with a blade length of 100 to 200 mm For axes with a blade length of up to 170 mm For straight scissors and hedge trimmers

Available in 30 days, delivery time 1-3 days

€125.00*

pcs

Turning set for NTS 255

00672364

Turning set for NTS 255 Device for tubes and gouge, universal sanding support, stone preparator, for a precise grinding result. Characteristics: Practical set for sharpening turning knives Sharpening attachment allows for easy sharpening of bevel blades, gouges and plane irons Stone grader to increase the grit for particularly fine grinding with one side and roughen it again with the other side

in stock

€125.00*