Accessories AN

damping mat 450x80x25 mm

00660061

damping mat 450x80x25 mm for airhammer to be glued with polyurethane solution adhesive under the steel base. Up to 4 damping mats are required for a proper installation: steel foundation without filling: 2 mats steel foundation with concrete filling: 3 mats steel foundation with concrete and steel filling: 4 mats

in stock

€42.99*

pcs

damping mat 510x150x25 mm

00660062

damping mat 510x150x25 mm for airhammer to be glued with polyurethane solution adhesive under the steel base. Up to 4 damping mats are required for a proper installation: steel foundation without filling: 2 mats steel foundation with concrete filling: 3 mats steel foundation with concrete and steel filling: 4 mats

in stock

€91.00*

pcs

damping mat 620x150x25 mm

00660063

damping mat 620x150x25 mm for airhammer to be glued with polyurethane solution adhesive under the steel base. Up to 4 damping mats are required for a proper installation: steel foundation without filling: 2 mats steel foundation with concrete filling: 3 mats steel foundation with concrete and steel filling: 4 mats

in stock

€102.99*

pcs

damping mat 700x150x25 mm

00660064

damping mat 700x150x25 mm for airhammer to be glued with polyurethane solution adhesive under the steel base. Up to 4 damping mats are required for a proper installation: steel foundation without filling: 2 mats steel foundation with concrete filling: 3 mats steel foundation with concrete and steel filling: 4 mats

in stock

€120.00*

pcs

Industrial grease gun 1-HHFP

00663579

Industrial grease gun 1-HHFP Filling nipple (FN), M 10 x 1 male 400 g grease cartridge, DIN 1284, grease filling system or loose grease using a spatula The grease gun for eternity! Specification Filling nipple (FN), M 10 x 1 male Polybag, with headcard, for hanging display High pressure hose, M 10 x 1 male, 11 x 300 mm, with 4-claws-coupler, M 10 x 1 female Special notes Operates with greases up to NLGI grade 2 at 20°C Plunger with exactly fitting when using bulk grease or cartridge Due to the flexibility of the push rod, the plunger can be inserted into damaged cartridges or cartridges not exactly matching the standard dimensions acc. to DIN 1283 TÜV - certified Pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication) No dummy (apparent) lubrication. Sealing system: O-ring and ball valve prevent grease compressed in the grease gun head from feeding back. Performance unchanged after 40.000 actuating cycles Separate filling and ventilation valves on grease gun head Grease gun head, zinc die casting Z 410 Sure grip handling due to deep band knurls Safe handle on the push rod Slip resistant handle on grease gun lever Enables even under extreme backpressure, a variable lubrication pressure with steady effort applied Allows lubrication in difficult to reach locations because the smallest lever operation results in grease being pumped reliably to the lubrication point. Plunger rod clamp on end cap enables manual pressure to be applied to spring to compress bulk grease, or to force in the plunger in damaged cartridges. Push rod can be locked in any position - push rod does not have to be fully retracted to release the spring pressure on the grease (grease does not saponify) High-speed ventilation, by half a rotation of the grease gun tube

in stock

€64.00*

pcs

option single-phase for AN-15-L

00667192

option single-phase for AN-15-L 230 Volts, 1-ph., 50 Hz motor power 2,2 kW, current 17 A. Do not connect with a plug but connect fix to the grid and use a circuit braker K25.

in stock

€279.00*

pcs

Wedge for top die AN powerhammer AN-09 Top

00667581

Wedge for top die AN powerhammer AN-09 Top

in stock

€26.00*

Details

T-Nut for dies AN-09 and AN-15

00667595

T-Nut for dies AN-09 and AN-15 Height approx. 18 mm, bolt diameter approx. 10 mm

in stock

€12.00*

Details

Nut for dies AN-09 and AN-15

00667598.091

Nut for dies AN-09 and AN-15 approx. 12x26 mm

in stock

€12.00*

Details

Spring support

00669946

Spring support for setting up air hammer or spring hammer, 60 Shore, outer diameter 47 mm, inner diameter ~ 17 mm These buffer bearings are required for the vibration-free attachment of air forges or spring hammers to the floor/foundation. They ensure vibration-free fixation of the machine.

in stock

€14.90*

pcs

Oil for powerhammer - SAE30

42701020.SAE30.001

Oil for powerhammer - SAE30 mineral lubricating oil, suitable for AN, Kuhn, Say-Mak. Also suitable for other powerhammers. perfect for power forging hammers excellent formation of oil mist very good adhesion good protection against corrosion This single-grade engine oil with a high viscosity index is made from extremely aging-resistant solvent raffinates as base oil and optimally selected active ingredients. Due to its specific properties, the oil is particularly intended for use in machines under extreme operating conditions.

in stock

€8.90*

l