suitable for AN-15 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

  suitable for AN-25 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

  suitable for AN-40 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

  suitable for AN-55 or other air and spring hammers   These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor.   Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation   Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips

  Filling nipple (FN), M 10 x 1 male 400 g grease cartridge, DIN 1284, grease filling system or loose grease using a spatula   The grease gun for eternity!   Specification Filling nipple (FN), M 10 x 1 male Polybag, with headcard, for hanging display High pressure hose, M 10 x 1 male, 11 x 300 mm, with 4-claws-coupler, M 10 x 1 female   Special notes Operates with greases up to NLGI grade 2 at 20°C Plunger with exactly fitting when using bulk grease or cartridge Due to the flexibility of the push rod, the plunger can be inserted into damaged cartridges or cartridges not exactly matching the standard dimensions acc. to DIN 1283 TÜV - certified Pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication) No dummy (apparent) lubrication. Sealing system: O-ring and ball valve prevent grease compressed in the grease gun head from feeding back. Performance unchanged after 40.000 actuating cycles Separate filling and ventilation valves on grease gun head Grease gun head, zinc die casting Z 410 Sure grip handling due to deep band knurls Safe handle on the push rod Slip resistant handle on grease gun lever Enables even under extreme backpressure, a variable lubrication pressure with steady effort applied Allows lubrication in difficult to reach locations because the smallest lever operation results in grease being pumped reliably to the lubrication point. Plunger rod clamp on end cap enables manual pressure to be applied to spring to compress bulk grease, or to force in the plunger in damaged cartridges. Push rod can be locked in any position - push rod does not have to be fully retracted to release the spring pressure on the grease (grease does not saponify) High-speed ventilation, by half a rotation of the grease gun tube

  230 Volts, 1-ph., 50 Hz motor power 2,2 kW,  current 17 A. Rated speed 1400 rpm, with motor protection switch, with zero-voltage release, with emergency stop.   Do not connect with a plug but connect fix to the grid and use a circuit braker K25.   You can only order this item if you purchase a new hammer. We will then install the 230V/1-phase motor and deliver the machine to you already converted.

  230 Volts, 1-ph., 50 Hz motor power 2,2 kW,  current 17 A. Rated speed 1400 rpm, with motor protection switch, with zero-voltage release   Do not connect with a plug but connect fix to the grid and use a circuit braker K25.   This article is required if you already have an air hammer and want to convert it.   Scope of delivery: Electric motor Motor protection switch + housing   This item is required if you already have an air hammer and want to convert it.   Do not connect it via a plug, but rather permanently to the power supply and protect it with a K20 or K25 circuit breaker.

  for the wedges of the dies

  for setting up air hammer or spring hammer, 60 Shore, outer diameter 47 mm, inner diameter ~ 17 mm   These buffer bearings are required for the vibration-free attachment of air forges or spring hammers to the floor/foundation. They ensure vibration-free fixation of the machine.

  mineral lubricating oil, suitable for AN, Kuhn, Say-Mak. Also suitable for other powerhammers.     perfect for power forging hammers excellent formation of oil mist very good adhesion good protection against corrosion   This single-grade engine oil with a high viscosity index is made from extremely aging-resistant solvent raffinates as base oil and optimally selected active ingredients. Due to its specific properties, the oil is particularly intended for use in machines under extreme operating conditions.