Airhammer AN
With the AN air forging hammers we offer a wide range of heavy-duty machines from China.
The machines are available from 15 kg to 2,000 kg ram weight and are characterized by simple and robust technology that has been tried and tested for decades. The stable cast housing is mounted on a steel base and the hammers can be set up relatively easily on a solid workshop floor with the help of polyurethane elastomer strips.
Of course, in addition to the air hammers, you can also get all spare parts and common dies for this type of air hammer from us.
suitable for AN-15 or other air and spring hammers These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor. Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips
suitable for AN-25 or other air and spring hammers These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor. Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips
suitable for AN-40 or other air and spring hammers These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor. Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips
suitable for AN-55 or other air and spring hammers These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor. Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips
Filling nipple (FN), M 10 x 1 male 400 g grease cartridge, DIN 1284, grease filling system or loose grease using a spatula The grease gun for eternity! Specification Filling nipple (FN), M 10 x 1 male Polybag, with headcard, for hanging display High pressure hose, M 10 x 1 male, 11 x 300 mm, with 4-claws-coupler, M 10 x 1 female Special notes Operates with greases up to NLGI grade 2 at 20°C Plunger with exactly fitting when using bulk grease or cartridge Due to the flexibility of the push rod, the plunger can be inserted into damaged cartridges or cartridges not exactly matching the standard dimensions acc. to DIN 1283 TÜV - certified Pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication) No dummy (apparent) lubrication. Sealing system: O-ring and ball valve prevent grease compressed in the grease gun head from feeding back. Performance unchanged after 40.000 actuating cycles Separate filling and ventilation valves on grease gun head Grease gun head, zinc die casting Z 410 Sure grip handling due to deep band knurls Safe handle on the push rod Slip resistant handle on grease gun lever Enables even under extreme backpressure, a variable lubrication pressure with steady effort applied Allows lubrication in difficult to reach locations because the smallest lever operation results in grease being pumped reliably to the lubrication point. Plunger rod clamp on end cap enables manual pressure to be applied to spring to compress bulk grease, or to force in the plunger in damaged cartridges. Push rod can be locked in any position - push rod does not have to be fully retracted to release the spring pressure on the grease (grease does not saponify) High-speed ventilation, by half a rotation of the grease gun tube
ram weight 15 kg hit energy 0.16 kJ, horiz. clearance 170 mm, free height of working area 160 mm, number of strokes 300 strokes/min, electric power 2.2 kW, three-phase 3 x 400 Volt, total weight 500 kg, length x width x height: 1180 x 650 x 1575 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base. serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear
ram weight 25 kg hit energy 0.27 kJ, horiz. clearance 235 mm, free height of working area 240 mm, number of strokes 250 strokes/min, electric power 3,0 kW, three-phase 3 x 400 Volt, total weight 1040 kg, length x width x height: 1470 x 740 x 1835 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base. serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear
ram weight 40 kg hit energy 0.53 kJ, horiz. clearance 270 mm, free height of working area 245 mm, number of strokes 245 strokes/min, electric power 4,0 kW, three-phase 3 x 400 Volt, total weight 1300 kg, length x width x height: 1650 x 800 x 1920 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base. serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear
ram weight 55 kg hit energy 0.7 kJ, horiz. clearance 300 mm, free height of working area 270 mm, number of strokes 230 strokes/min, electric power 7,5 kW, three-phase 3 x 400 Volt, total weight 1720 kg, length x width x height: 1860 x 880 x 2100 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base. serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear
ram weight 75 kg hit energy 1,0 kJ, horiz. clearance 330 mm, free height of working area 297 mm, number of strokes 210 strokes/min, electric power 7,5 kW, three-phase 3 x 400 Volt, total weight 2800 kg, length x width x height: 1620 x 930 x 2200 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop. serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear
230 Volts, 1-ph., 50 Hz motor power 2,2 kW, current 17 A. Rated speed 1400 rpm, with motor protection switch, with zero-voltage release, with emergency stop. Do not connect with a plug but connect fix to the grid and use a circuit braker K25. You can only order this item if you purchase a new hammer. We will then install the 230V/1-phase motor and deliver the machine to you already converted.
230 Volts, 1-ph., 50 Hz motor power 2,2 kW, current 17 A. Rated speed 1400 rpm, with motor protection switch, with zero-voltage release Do not connect with a plug but connect fix to the grid and use a circuit braker K25. This article is required if you already have an air hammer and want to convert it. Scope of delivery: Electric motor Motor protection switch + housing This item is required if you already have an air hammer and want to convert it. Do not connect it via a plug, but rather permanently to the power supply and protect it with a K20 or K25 circuit breaker.
suitable for #Varinfo XX kW, 400V-50Hz, 3-Phases Original Motor An energy-efficient three-phase motor according to IEC standards. With its current efficiency class, it is ideal for driving air forging hammers in industrial environments. Features: Good value for money: A quality product at an attractive price Robust: Lightweight thanks to aluminum housing Easy installation: The terminal box position is variable (top, left, or right) and can be adjusted by simply screwing the feet. High level of safety: Integrated motor protection via PTC thermistors. Durability: Radial shaft seal Versatile: Can also be used for other applications and is suitable for operation with a frequency converter. Scope of delivery: Motor with ready-to-connect terminal box (including terminal diagram) 2 cable glands Shaft with key Note: Image similar
