Spare parts AN
suitable for AN-15 or other air and spring hammers These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor. Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips
suitable for AN-25 or other air and spring hammers These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor. Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips
suitable for AN-40 or other air and spring hammers These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor. Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips
suitable for AN-55 or other air and spring hammers These damping mats provide a technically clean decoupling of air forging or spring hammers. They are made of a special polyurethane elastomer and are mounted between the steel base and the workshop floor. Features: Clean decoupling of the machine Significantly reduced emissions Improved smooth running Increased machine service life Durable material Easy to attach (glue) Quickly improve the installation situation Several strips are required to store the air hammer. These are glued under the steel base with polyurethane adhesive or simply placed underneath. We recommend: Base unfilled: 2 strips Base filled with concrete: 3 strips Base filled with reinforced concrete: 4 strips
suitable for #Varinfo XX kW, 400V-50Hz, 3-Phases Original Motor An energy-efficient three-phase motor according to IEC standards. With its current efficiency class, it is ideal for driving air forging hammers in industrial environments. Features: Good value for money: A quality product at an attractive price Robust: Lightweight thanks to aluminum housing Easy installation: The terminal box position is variable (top, left, or right) and can be adjusted by simply screwing the feet. High level of safety: Integrated motor protection via PTC thermistors. Durability: Radial shaft seal Versatile: Can also be used for other applications and is suitable for operation with a frequency converter. Scope of delivery: Motor with ready-to-connect terminal box (including terminal diagram) 2 cable glands Shaft with key Note: Image similar
Special V-belt for air forge hammer #Varinfo X pieces are required for the #Varinfo The very robust and reinforced design is suitable for use in the forge or workshop. The V-belts are used to transmit power to the motor and ensure that the machine runs optimally. The V-belt tension and the condition of the V-belts should be checked regularly. A V-belt change is necessary if the V-belt is porous or cracked. A squeaking noise can also be due to a defective V-belt.
2x holes for countersunk screw, with oil grooves, 2 pieces are required for a revision
#Varinfo set of two pieces, diameter ø mm
consisting of: 2x small segment rings 2x large segment rings 1x spring 2x mounting screws If your power hammer noticeably loses impact force and blows out increased amounts of compressed air and oil in the area of the front guide bush, this is frequently caused by worn segment rings or the corresponding wear plates. To restore the machine's full performance and operational readiness, these components should be replaced immediately in the event of heavy wear.
If the power hammer experiences a noticeable loss of striking power, blows compressed air and oil out around the front guide bushing, and the ram wobbles perceptibly, this is frequently caused by worn segmented rings, the corresponding wear plates, or the guide bushing itself. Improperly wedged dies can also cause damage to the front guide bushing. In such cases, the guide bushing will exhibit distinct scoring and notches and must be replaced. This is often the case with older machines. To restore the full performance and operational readiness of the machine, these components should be replaced immediately in the event of severe wear. Note: Only the guide bushing is included in delivery. When replacing it, the wear plates and segmented rings must also be replaced. These are also available in our shop.
suitable for all AN-L air hammer models, 45° angled, with band clamp, prevents the ingress of dirt and is rewashable.