Forging Set 1
1x Blacksmith's 1,25 kg (541012)
1x Wolf's jaw tong 400 (538040)
1x Book "Schmieden lernen" (961110) - in German
Blacksmith's hammer 1,25 kg is the ideal standard hammer. The weight of the head is a good mean.
The ash handle fits comfortably in your hand.
The Wolf's jaw tong 400 can be used universally for flat, round and square workpieces. This tong is ideal for 8mm workpieces, but you can also hold smaller and bigger ones.
Please note: The book "Schmieden lernen" is in German!
Moulding Set 1
Set consisting of:
1x special moulding sand 25 kg
1x Sieve Ø 380 mm
1x Talc powder 500 g
1x moulding box 200 x 300 x 160 mm
1x shovel-type sleeker L13
Properties moulding sand:
Application: Pound sand quite hard. With joint surfaces always use parting powder. Pour metal slowly into mould and vent. Leave the cast as long as possible in the mould. The surface will be smoother and the sand will last longer.
Sieve ø 380 mm:
for sieving moulding sand, frame reinforced made of galavanized steel, extra strong iron wire, mesh size 3 mm.
Talc powder:
Fine talc to form the separating layer of the mold between the bottom and cope.
Moulding box:
two-piece construction, each 80 mm high, solid welded construction with accurately fitting bolts,
inner face moulded to avoid sand from falling out.
Shovel-type sleeker:
Forged steel, lancet end 30 x 17 mm, shovel end 27 x 13 mm, total length 150 mm.
Ideal for post-processing or free-forming in the sand.
Set consisting of:
1x Moulding box 100 x 200 x 100 mm
1x Moulding box 200 x 300 x 160 mm
1x Moulding box 250 x 350 x 200 mm
Features:
Sturdy welded construction
Robust design
Precisely fitting guides
Threaded fitting bolts eliminate the need for screw clamps
Profiled to prevent sand from slipping
Good temperature resistance
(The picture shows the profiled inner edge - this is only done in this way for molding boxes of size 200x300x160 and above. This is not needed for the small box 100x200x100, here the sand holds itself firmly enough in the mold)
Flap grinding disc TRIMFIX® BLACK MAMBA® #Varinfo
High-performance flap grinding disc provides an exceptionally long service life and material removal on steel and stainless steel
Half mask BLS4000next, easy handling with bayonet quick release for filter changes.
Features:
Particularly large field of vision
Easy to clean and maintain
Universal size: adapts perfectly to the shape of the head and face
Certified half-mask for respiratory protection made in Europe
Simple, intuitive use
With drop-off function
Weight of the mask reduced by 25% for high wearing comfort
Bayonet connection for 2 respiratory protection filters
Personal protective equipment (PPE) category III according to PPE regulation 2016/425
Meets all requirements of the current test standard EN 140:1998
The 4000next half mask is a particularly light, easy-to-use respiratory protection mask. The mask is equipped with a bayonet quick-release fastener.
When changing the filter, a quarter turn is enough to remove the filter or connect a new filter. An integrated locking function ensures that the filter is held securely during use.
By using 2 filter elements, the half-mask respiratory protection offers a particularly large field of vision and optimized weight distribution. During the development of the half-mask, the weight was reduced by 25% compared to standard half-masks through design measures.
Cleaning and maintenance of this half-mask respiratory protection is also particularly easy. The mask can be disassembled within a few seconds without any tools.
The innovative "drop-off" system with a quick attachment in the neck area allows the mask to be put on and taken off quickly. This leaves your hands free for other activities.
international magazine for metal design,
in german language, 325x240 mm,
Selection of all available titles,
about 190 of 206 available journals
Here we reach into the shelf and look for all - really ALL - available magazines (each available issue 1x)
International Magazine for Metal Design,
Format 325x240 mm
Selection of all available titles,
approx. 206 issues,
sorted in binders
All issues are included here
A rare opportunity
consisting of: scythe hammer, scythe anvil and scythestone
With this set, you're perfectly equipped to sharpen and hammer your scythe.
Instead of the combined individual prices of €62, the set is only €50 (german VAT applied).
with your own motif or text
Customized product - No cancellation, exchange or return!
The perfect way to mark your individual hammer. For the less creative, here's a little food for thought:
"MY hammer", "keep off", "stolen from...", and much more....
To engrave your logo/Text we need:
The logo and/or Text (please send it by email to info@angele.de)
The position (standard is in the middle of the handle)
Important information:
A reasonable logo and text height is approx. 12 mm. The length of the text must not exceed the length of the hammer handle. However, we usually adjust the logo and font to the optimal size.
Send us your logo by e-mail to info@angele.de. After checking your file, we will send you an order confirmation.
Please avoid shading, grids or color gradients in the template and ensure that the image resolution is adequate.
Readable pixel file formats: * .tif, * .bmp, * .jpg, * .gif, * .pcx, * .pdf
Readable vector data formats: * .ai, * .eps, * .dxf, * .dwg, * .wmf, * .plt, * .cdr, * .pdf
Only applies in conjunction with the purchase of one of our hammers.
solid but soft leather
Leather is a natural product. We must therefore reserve the right to color deviations and color changes.
Please note the size information in the Downloads tab!
solid but soft leather
width ~ 60 cm,
total length of hip belt ~ 140 cm,
height of the apron ~ 74 cm,
with 2 exterior pockets and an inside pocket
Leather is a natural product. Color and hue are subject to change.
with your own motif or text
Customized product - No cancellation, exchange or return!
To engrave your logo we need:
The logo (by email)
The desired logo size (mm)
The position (standard is at chest height)
Important information:
A reasonable logo size is approx. 30x30 - 80x80 mm. Send us your logo by e-mail to info@angele.de. After checking your file, we will send you an order confirmation.
Please avoid shading, grids or color gradients in the template and ensure that the image resolution is adequate.
Readable pixel file formats: * .tif, * .bmp, * .jpg, * .gif, * .pcx, * .pdf
Readable vector data formats: * .ai, * .eps, * .dxf, * .dwg, * .wmf, * .plt, * .cdr, * .pdf
Only applies in conjunction with the purchase of one of our leather aprons.
Set consisting of:
1x crucible 1 kg
1x crucible tong Ø 90 mm
1x crucible shank Ø 90 mm
Properties crucible:
fast heating-up time
all-over heat conduction
slight slag accretion
good chemical resistance
made in germany
The capacity is specified in kg, based on the density of copper and the volume in liters.
The maximum application temperature is 1450 °C. For steel and special alloys you need special high temperature crucibles.
Crucible tong:
The right pair of tongs is important when gripping the crucible. The stable gripper claws grip the crucible securely and stably. The corresponding tongs must be used for smaller or larger crucibles.
Crucible shank:
With the pouring holder, the melt can be safely poured into the molding box.
Set consisting of:
1x crucible 2 kg
1x crucible tong Ø 102 mm
1x crucible shank Ø 102 mm
Properties crucible:
fast heating-up time
all-over heat conduction
slight slag accretion
good chemical resistance
made in germany
The capacity is specified in kg, based on the density of copper and the volume in liters.
The maximum application temperature is 1450 °C. For steel and special alloys you need special high temperature crucibles.
Crucible tong:
The right pair of tongs is important when gripping the crucible. The stable gripper claws grip the crucible securely and stably. The corresponding tongs must be used for smaller or larger crucibles.
Crucible shank:
With the pouring holder, the melt can be safely poured into the molding box.
Set consisting of:
1x crucible 4 kg
1x crucible tong Ø 115 mm
1x crucible shank Ø 115 mm
Properties crucible:
fast heating-up time
all-over heat conduction
slight slag accretion
good chemical resistance
made in germany
The capacity is specified in kg, based on the density of copper and the volume in liters.
The maximum application temperature is 1450 °C. For steel and special alloys you need special high temperature crucibles.
Crucible tong:
The right pair of tongs is important when gripping the crucible. The stable gripper claws grip the crucible securely and stably. The corresponding tongs must be used for smaller or larger crucibles.
Crucible shank:
With the pouring holder, the melt can be safely poured into the molding box.
Crucible Set T4 - 8 kg
Set consisting of:
1x crucible 8 kg
1x crucible tong Ø 155 mm
1x crucible shank Ø 155 mm
Properties crucible:
fast heating-up time
all-over heat conduction
slight slag accretion
good chemical resistance
made in germany
The capacity is specified in kg, based on the density of copper and the volume in liters.
The maximum application temperature is 1450 °C. For steel and special alloys you need special high temperature crucibles.
Crucible tong:
The right pair of tongs is important when gripping the crucible. The stable gripper claws grip the crucible securely and stably. The corresponding tongs must be used for smaller or larger crucibles.
Crucible shank:
With the pouring holder, the melt can be safely poured into the molding box.