Accessories gas ovens
Connection for one more gas bottle
€63.00*
00131204
Connection for one more gas bottle
fitting for german gas bottles 11 kg and 33 kg,
high pressure tube length 0,4 m and connecting T,
to connect one more gas bottle.
Combination connection for optional connection to 5, 11 or 33 kg gas bottles
Maximum permissible pressure: PS 30 bar
Hose: rubber with textile insert
Cold-resistant down to -30 °C
For longer operation of gas ovens, prevents "icing" due to lower extraction quantity per gas bottle.
Support UG 1 for P-301 or Proforge
€339.99*
00151051
Support UG 1 for P-301 or Proforge
mobile with 4 wheels,
600 x 500 mm table area,
with bow for suspension of tools,
place for gas bottle
Support UG 2 for P-302
€380.00*
00151052
Support UG 2 for P-302
mobile with 4 wheels,
750 x 600 mm table area,
with bow for suspension of tools,
place for gas bottles
gas connection kit
€83.00*
00151062
gas connection kit, ready for connection to 11 kg gas bottles
with regulator, manometer, hose burst safety device and 2 m hose
for atmospheric gas forges, like PS-230, Proforge, P-301/P-302
temperature sensor up to 1200°C
€29.00*
00159012
temperature sensor up to 1200°C
element type K 3 x 200 mm,
length of wire 1500 mm (temperature resistant up to 180°),
plug type K for DTM
Without digital temperature indicator !
Digital Thermometer
€49.00*
00159014
Digital Thermometer
up to 1370°C (2498 °F),
for 2 pieces of temperature sensor type K
Delivery includes protective cover, 2 pieces of sensors up to 250 °C,
Sensors up to 1200°C available as accessories.
This thermometer allows to work with two sensors at the same time and reliably measure temperatures up to a maximum of 1370 °C.
This means that the temperature in the oven and in the workpiece can be measured at the same time.
Technical data:
2 sensor slots for "Type K" sensor
Measuring range: -200°C....1370°C, resolution: 0.1°C
Accuracy: 0.1±0.4°C
Various functions: temperature measurement, max./min., average value, hold function
Display: LCD
Operating temperature range: -10°C...50°C
Dimensions approx. 158 x 75 x 41 mm
Unit adjustable °C or °F or K
9V block battery
with folding base for setting up
Infrared thermometer 1600°C (2912°F)
€99.00*
00159015
Infrared thermometer 1600°C (2912°F)
up to 1600 °C (2912°F),
rugged design, easy handling.
Delivery with protective bag
Technical specifications:
Measuring range: -50°C .... 1600°C, resolution: 0.1°C
Accuracy: ± 2 °C
Various functions: temperature measurement, Temperature alarm (max./min.), temperature (max./min.), average temperature, differential temperature
Display: LCD, with background lighting
Battery display in %
Operating temperature range: 0°C...50°C
Dimensions approx. 110 x 170 x 50 mm
Automatic shutdown
Unit can be set to °C or °F
Emissivity adjustable 0.1-1.0 (suitable for different surfaces), delivery including emissivity table
Measurement time: 0.5s
9V block battery (included)
Thermal security
€69.00*
00159051
consisting of thermal security valve in and thermal sensor and capillary tube,
ca. 750 mm length of the capillary tube.
Gas-entry M 14x1,5 AG (for cutting ring fitting Ø 8 mm),
Gas-outlet M 14x1,5 IG (cutting ring fitting Ø 8 mm)
Suitable for Proforge, P-301 and P-302, and other gas forge furnaces.
The thermal monitoring device is part of the thermoelectric ignition safety device for gas-fired forge furnaces and, in the event of a malfunction, is designed to quickly prevent the escape of unburned gas.
Function:
The gas flame heats the tip of the thermocouple. This generates a thermal voltage, which is conducted through the copper wire to a holding magnet. Once sufficient voltage has been built up, the magnet holds the valve open. If combustion ceases, the tip of the thermocouple cools down, the thermal voltage is reduced, and the holding magnet closes the valve. The response time is between 10 and 60 seconds, depending on the design.
An essential safety device for all gas-fired forge furnaces. Also suitable for DIY construction!
Thermal security for Proforge
€89.00*
00159053
consisting of:
Thermal safety valve
Thermocouple
Mounting bracket
Suitable adapters
The thermal monitoring device is part of the thermoelectric ignition safety device for gas-fired forge furnaces and is designed to quickly prevent the escape of unburned gas in the event of a malfunction.
Can be mounted between the ball valve and the burner tube. The mounting bracket is attached to the housing with screws. Holes must be drilled and threaded for this purpose.
Function:
The gas flame heats the tip of the thermocouple. This generates a thermal voltage, which is conducted through the copper wire to a holding magnet. Once sufficient voltage is built up, the magnet holds the valve open. If combustion ceases, the tip of the thermocouple cools, the thermal voltage is reduced, and the holding magnet closes the valve. The response time is between 10 and 60 seconds, depending on the design.
An essential safety device for all gas-fired forge furnaces. Also suitable for DIY construction!
tub for P-301
€93.00*
00159091
tub for P-301
of heat resistant steel 1.4841, t=5mm
inside dimensions 230 x 160 x 15 mm
as protection of the inlining when Borax is in use - depending on temperature and operating hours this article is also subject to wear!
tub for P-302
€105.01*
00159092
tub for P-302
of heat resistant steel (1.4841), t=5 mm
inside dimensions 460 x 160 x 15 mm
as protection of the inlining when Borax is in use - depending on temperature and operating hours this article is also subject to wear!
tub for Proforge
€62.00*
00159093
tub for Proforge
of heat resistant steel 5 mm
inside dimensions 230 x 90 x 15 mm
as protection of the inlining when Borax is in use - depending on temperature and operating hours this article is also subject to wear!
connection AG GF x RST 10 mm
€9.50*
71210040
connection AG GF x RST 10 mm
male (W21,8x1/14-LH) and pipe 10 mm
for the connection of regulators (GF) to gas pipelines
connection AG GF x RST 12 mm
€9.50*
71210041
connection AG GF x RST 12 mm
male (W21,8x1/14-LH) and pipe 12 mm
for the connection of regulators (GF) to gas pipelines
Flame non-return valve
€39.00*
71211011
G 3/8 LH-ÜM x G 3/8 LH-KN,
for installation between hose breaking security and gas hose
Prevents dangerous gas mixture formation through a gas non-return valve
Stops flashbacks through a flame arrester
Interrupts the gas flow through an integrated thermal afterflow stop before a certain temperature is reached
Dirt filter protects the gas non-return valve from contamination
Gas forging furnaces must be protected with a flashback arrester in accordance with the professional association requirements of DGUV Regulation 79 (German Statutory Accident Insurance - previously BGV D 34).
Hose burst safety device
€16.01*
71211020
Hose burst safety device
4,0 bar 6,0 kg/h
G 3/8 LH-ÜM x G 3/8 LH-KN
connection gas hose 2 m
€20.00*
71211022
connection gas hose 2 m
3/8" LH / 3/8" LH
Gas hose for connecting to small pressure regulators and for operating gas ovens.
Please note that the hoses can become porous or brittle over the years and should therefore be checked regularly.
We use high-quality hoses from a German manufacturer that meet all safety requirements.
propane regulator 0,5 - 4 bar Shell
€69.00*
71211024
propane regulator 0,5 - 4 bar Shell
12 kg/h, Shell x 3/8" LH-KN
with pressure gauge and excess flow device, 35° angled,
for gas bottles with Shell thread (FR, BE, CH, RU)
manometer 0-6 bar
€14.80*
71211026
manometer 0-6 bar
for gas-regulator
spare part for article 71211021 / 71211024 / 151062
European Set of adaptors for gas bottles
€25.00*
71211030
European Set of adaptors for gas bottles
consisting of 4 adaptors,
for connection of pressure regulator with German connection to the common gas bottles on the European market
Adapter 1: Italy, Switzerland: AG KLF x M 10 x 1 male thread
Adapter 2: Greece, Italy, Austria and Slovenia: AG KLF x IG Ital.A (W20x1/14lh female thread connection)
Adapter 3: England, Finland, Iceland, Norway, Portugal and Sweden: AG KLF x AG Primus (M14 x 1,5 male thread connection)
Adapter 4: Belgium, England, France, Ireland, Croatia, Latvia, Luxembourg, Macedonia, Montenegro, Netherlands, Switzerland, Serbia, Slovakia, Slovenia, Spain and the Czech Republic: AG KLF x W 21.8 x 1/14 LH female thread connection
adaptor no. 1 for gas bottles
€7.00*
71211031
adaptor no. 1 for gas bottles
for countries: Italy, Switzerland (Vetta Gas)
AG KLF x AG M 10 x 1 male thread
adaptor no. 2 for gas bottles
€7.00*
71211032
adaptor no. 2 for gas bottles
for Greece, Italy, Austria, und Slowenia (Liqui, Butan, Agip, Mi, Pibi)
AG KLF x IG Ital.A (W20 x 1/14 LH female thread connection
adaptor no. 3 for gas bottles
€7.00*
71211033
adaptor no. 3 for gas bottles
for countries: England, Finland, Island, Norway, Portugal und Sweden (Primus, Pibi, Kosan)
AG KLF x AG Primus M 14x1,5 male thread connection
adaptor no. 4 for gas bottles
€7.00*
71211034
adaptor no. 4 for gas bottles
for countries: Belgium, UK, France, Ireland, Croatia, Latvia, Luxembourg, macedonia, Montenegro, Netherlands, Serbia, Slovakia, Slovenia, Switzerland, Spain and Czech Republic
(Nordisk-Flaskegas, Calor, Butto, Esso, Drachen, Thermo, Primus, Butano, Oba, Shell)
AG KLF x W 21,8 (5/8") x 1/14" LH female thread connection