Gas accessories

Assecoires gasforge

Accessories gas ovens

(BLOB)ceramic chips (aluminium oxide), bulk-2

00131101

ceramic chips (aluminium oxide), bulk density 3,5 g/cm³ per kg The chips are ideal for use in gas ovens or gas forges. They can protect the inner insulation in gas ovens. This can also effectively protect brittle or sensitive insulation wool. The chips prevent direct contact of the workpiece with the oven insulation and compensate for unevenness. Two handful equals approx. 1 kg 5 kg fit in a box with 18x13x13 cm

in stock

€6.00*

ceramic chips (aluminium oxide) 25 kg

00131102

packed in a bag, Density approx. 3.5 g/cm³ (aluminum oxide) The chips are ideal for use in gas ovens or gas forges. They can protect the inner insulation in gas ovens. This can also effectively protect brittle or sensitive insulation wool. The chips prevent direct contact of the workpiece with the oven insulation and compensate for unevenness.

Content: 25 Kilogramm (€5.00* / 1 Kilogramm)

in stock

From €125.00*

seive for ceramic-chips

00131120

seive for ceramic-chips insidedimensions 390 x 245 mm, 8 mm

in stock

€62.00*

pcs

Connection for one more gas bottle

00131204

Connection for one more gas bottle fitting for german gas bottles 11 kg and 33 kg, high pressure tube length 0,4 m and connecting T, to connect one more gas bottle. Combination connection for optional connection to 5, 11 or 33 kg gas bottles Maximum permissible pressure: PS 30 bar Hose: rubber with textile insert Cold-resistant down to -30 °C For longer operation of gas ovens, prevents "icing" due to lower extraction quantity per gas bottle.

in stock

€63.00*

pcs

connection kit with regulator 4 kg/h, 50 mbar

00131205

flexible hose 3 m, with hose burst safety device, gas regulator for 50 mbar fix, gas debit 4 kg/h, with Safety overpressure shut-off valve OPSO and Safety pressure relief valve PRV, fitting for german gas bottles 33 kg

Available in 30 days, delivery time 1-3 days

€355.00*

pcs

gas-socket 1/2"

00131220

gas-socket 1/2" for quick-connection

in stock

€64.00*

pcs

metall hose 1.5 m

00131221

metall hose 1.5 m for gas plug for connection of gas forges

in stock

€89.00*

pcs

Support UG 1 for P-301 or Proforge

00151051

Support UG 1 for P-301 or Proforge mobile with 4 wheels, 600 x 500 mm table area, with bow for suspension of tools, place for gas bottle

in stock

€339.99*

pcs

Support UG 2 for P-302

00151052

Support UG 2 for P-302 mobile with 4 wheels, 750 x 600 mm table area, with bow for suspension of tools, place for gas bottles

in stock

€380.00*

pcs

gas connection kit

00151062

gas connection kit, ready for connection to 11 kg gas bottles with regulator, manometer, hose burst safety device and 2 m hose for atmospheric gas forges, like PS-230, Proforge, P-301/P-302

in stock

€83.00*

pcs

temperature indicator

00159011

temperature indicator digital, up to 1200°C with sensor element 3x200 mm Technical specifications: Input: thermocouples type K NiCr-Ni (miniature thermocouple socket) Measuring range: -100 ° C..1370 ° C, resolution: 1 ° C Accuracy: ± 1 ° C (-20..180 ° C), ± 1.6% of full scale Measured value (from 180 ° C), ± 1 digit Display: LCD, 3½-digit, 12.7mm digit height Operating temperature range: 0 ° C..50 ° C Battery operating time: ~ 2000h Dimensions approx. 72.5 x 123 x 27.5 mm Why this temperature indicator? - Reliable - Easy handling - Robust - Durable

in stock

€167.00*

pcs

temperature sensor up to 1200°C

00159012

temperature sensor up to 1200°C element type K 3 x 200 mm, length of wire 1500 mm (temperature resistant up to 180°), plug type K for DTM Without digital temperature indicator !

in stock

€29.00*

pcs

Digital Thermometer

00159014

Digital Thermometer up to 1370°C (2498 °F), for 2 pieces of temperature sensor type K Delivery includes protective cover, 2 pieces of sensors up to 250 °C, Sensors up to 1200°C available as accessories. This thermometer allows to work with two sensors at the same time and reliably measure temperatures up to a maximum of 1370 °C. This means that the temperature in the oven and in the workpiece can be measured at the same time. Technical data: 2 sensor slots for "Type K" sensor Measuring range: -200°C....1370°C, resolution: 0.1°C Accuracy: 0.1±0.4°C Various functions: temperature measurement, max./min., average value, hold function Display: LCD Operating temperature range: -10°C...50°C Dimensions approx. 158 x 75 x 41 mm Unit adjustable °C or °F or K 9V block battery with folding base for setting up

in stock

€49.00*

pcs

Infrared thermometer 1600°C (2912°F)

00159015

Infrared thermometer 1600°C (2912°F) up to 1600 °C (2912°F), rugged design, easy handling. Delivery with protective bag Technical specifications: Measuring range: -50°C .... 1600°C, resolution: 0.1°C Accuracy: ± 2 °C Various functions: temperature measurement, Temperature alarm (max./min.), temperature (max./min.), average temperature, differential temperature Display: LCD, with background lighting Battery display in % Operating temperature range: 0°C...50°C Dimensions approx. 110 x 170 x 50 mm Automatic shutdown Unit can be set to °C or °F Emissivity adjustable 0.1-1.0 (suitable for different surfaces), delivery including emissivity table Measurement time: 0.5s 9V block battery (included)

in stock

€99.00*

pcs

Thermal security

00159051

consisting of thermal security valve in and thermal sensor and capillary tube, ca. 750 mm length of the capillary tube. Gas-entry M 14x1,5 AG (for cutting ring fitting Ø 8 mm), Gas-outlet M 14x1,5 IG (cutting ring fitting Ø 8 mm) Suitable for Proforge, P-301 and P-302, and other gas forge furnaces. The thermal monitoring device is part of the thermoelectric ignition safety device for gas-fired forge furnaces and, in the event of a malfunction, is designed to quickly prevent the escape of unburned gas. Function: The gas flame heats the tip of the thermocouple. This generates a thermal voltage, which is conducted through the copper wire to a holding magnet. Once sufficient voltage has been built up, the magnet holds the valve open. If combustion ceases, the tip of the thermocouple cools down, the thermal voltage is reduced, and the holding magnet closes the valve. The response time is between 10 and 60 seconds, depending on the design. An essential safety device for all gas-fired forge furnaces. Also suitable for DIY construction!

Available in 30 days, delivery time 1-3 days

€69.00*

pcs

Thermal security for Proforge

00159053

consisting of: Thermal safety valve Thermocouple Mounting bracket Suitable adapters The thermal monitoring device is part of the thermoelectric ignition safety device for gas-fired forge furnaces and is designed to quickly prevent the escape of unburned gas in the event of a malfunction. Can be mounted between the ball valve and the burner tube. The mounting bracket is attached to the housing with screws. Holes must be drilled and threaded for this purpose. Function: The gas flame heats the tip of the thermocouple. This generates a thermal voltage, which is conducted through the copper wire to a holding magnet. Once sufficient voltage is built up, the magnet holds the valve open. If combustion ceases, the tip of the thermocouple cools, the thermal voltage is reduced, and the holding magnet closes the valve. The response time is between 10 and 60 seconds, depending on the design. An essential safety device for all gas-fired forge furnaces. Also suitable for DIY construction!

Available in 30 days, delivery time 1-3 days

€89.00*

pcs

tub for P-301

00159091

tub for P-301 of heat resistant steel 1.4841, t=5mm inside dimensions 230 x 160 x 15 mm as protection of the inlining when Borax is in use - depending on temperature and operating hours this article is also subject to wear!

in stock

€93.00*

pcs

tub for P-302

00159092

tub for P-302 of heat resistant steel (1.4841), t=5 mm inside dimensions 460 x 160 x 15 mm as protection of the inlining when Borax is in use - depending on temperature and operating hours this article is also subject to wear!

in stock

€105.01*

pcs

tub for Proforge

00159093

tub for Proforge of heat resistant steel 5 mm inside dimensions 230 x 90 x 15 mm as protection of the inlining when Borax is in use - depending on temperature and operating hours this article is also subject to wear!

in stock

€62.00*

pcs

connection AG GF x RST 10 mm

71210040

connection AG GF x RST 10 mm male (W21,8x1/14-LH) and pipe 10 mm for the connection of regulators (GF) to gas pipelines

in stock

€9.50*

pcs

connection AG GF x RST 12 mm

71210041

connection AG GF x RST 12 mm male (W21,8x1/14-LH) and pipe 12 mm for the connection of regulators (GF) to gas pipelines

in stock

€9.50*

pcs

Flame non-return valve

71211011

G 3/8 LH-ÜM x G 3/8 LH-KN, for installation between hose breaking security and gas hose Prevents dangerous gas mixture formation through a gas non-return valve Stops flashbacks through a flame arrester Interrupts the gas flow through an integrated thermal afterflow stop before a certain temperature is reached Dirt filter protects the gas non-return valve from contamination Gas forging furnaces must be protected with a flashback arrester in accordance with the professional association requirements of DGUV Regulation 79 (German Statutory Accident Insurance - previously BGV D 34).

in stock

€39.00*

pcs

Hose burst safety device

71211020

Hose burst safety device 4,0 bar 6,0 kg/h G 3/8 LH-ÜM x G 3/8 LH-KN

in stock

€16.01*

pcs

connection gas hose 2 m

71211022

connection gas hose 2 m 3/8" LH / 3/8" LH Gas hose for connecting to small pressure regulators and for operating gas ovens. Please note that the hoses can become porous or brittle over the years and should therefore be checked regularly. We use high-quality hoses from a German manufacturer that meet all safety requirements.

in stock

€20.00*

pcs