Skip to main content Skip to search Skip to main navigation

With the AN air forging hammers we offer a wide range of heavy-duty machines from China.

The machines are available from 15 kg to 2,000 kg ram weight and are characterized by simple and robust technology that has been tried and tested for decades. The stable cast housing is mounted on a steel base and the hammers can be set up relatively easily on a solid workshop floor with the help of polyurethane elastomer strips.

Of course, in addition to the air hammers, you can also get all spare parts and common dies for this type of air hammer from us.

Airhammer AN
Airhammer AN
Dies AN
Dies AN
Accessories AN
Accessories AN
Spare parts AN
Spare parts AN
Filter
damping mat 450x80x25 mm
00660061
damping mat 450x80x25 mm for airhammer to be glued with polyurethane solution adhesive under the steel base.   Up to 4 damping mats are required for a proper installation: steel foundation without filling: 2 mats steel foundation with concrete filling: 3 mats steel foundation with concrete and steel filling: 4 mats

in stock

€42.99*
pcs
damping mat 510x150x25 mm
00660062
damping mat 510x150x25 mm for airhammer to be glued with polyurethane solution adhesive under the steel base.   Up to 4 damping mats are required for a proper installation: steel foundation without filling: 2 mats steel foundation with concrete filling: 3 mats steel foundation with concrete and steel filling: 4 mats

in stock

€91.00*
pcs
damping mat 620x150x25 mm
00660063
damping mat 620x150x25 mm for airhammer to be glued with polyurethane solution adhesive under the steel base.   Up to 4 damping mats are required for a proper installation: steel foundation without filling: 2 mats steel foundation with concrete filling: 3 mats steel foundation with concrete and steel filling: 4 mats

in stock

€102.99*
pcs
damping mat 700x150x25 mm
00660064
damping mat 700x150x25 mm for airhammer to be glued with polyurethane solution adhesive under the steel base.   Up to 4 damping mats are required for a proper installation: steel foundation without filling: 2 mats steel foundation with concrete filling: 3 mats steel foundation with concrete and steel filling: 4 mats

in stock

€120.00*
pcs
Industrial grease gun 1-HHFP
00663579
Industrial grease gun 1-HHFP Filling nipple (FN), M 10 x 1 male 400 g grease cartridge, DIN 1284, grease filling system or loose grease using a spatula   The grease gun for eternity!   Specification Filling nipple (FN), M 10 x 1 male Polybag, with headcard, for hanging display High pressure hose, M 10 x 1 male, 11 x 300 mm, with 4-claws-coupler, M 10 x 1 female   Special notes Operates with greases up to NLGI grade 2 at 20°C Plunger with exactly fitting when using bulk grease or cartridge Due to the flexibility of the push rod, the plunger can be inserted into damaged cartridges or cartridges not exactly matching the standard dimensions acc. to DIN 1283 TÜV - certified Pump piston, cylinder and O-ring with 6 μ fit (no dummy lubrication) No dummy (apparent) lubrication. Sealing system: O-ring and ball valve prevent grease compressed in the grease gun head from feeding back. Performance unchanged after 40.000 actuating cycles Separate filling and ventilation valves on grease gun head Grease gun head, zinc die casting Z 410 Sure grip handling due to deep band knurls Safe handle on the push rod Slip resistant handle on grease gun lever Enables even under extreme backpressure, a variable lubrication pressure with steady effort applied Allows lubrication in difficult to reach locations because the smallest lever operation results in grease being pumped reliably to the lubrication point. Plunger rod clamp on end cap enables manual pressure to be applied to spring to compress bulk grease, or to force in the plunger in damaged cartridges. Push rod can be locked in any position - push rod does not have to be fully retracted to release the spring pressure on the grease (grease does not saponify) High-speed ventilation, by half a rotation of the grease gun tube

in stock

€64.00*
pcs
AN-15 L airhammer
00667012
AN-15 L airhammer ram weight 15 kg hit energy 0.16 kJ, horiz. clearance 170 mm, free height of working area 160 mm, number of strokes 300 strokes/min, electric power 2.2 kW, three-phase 3 x 400 Volt, total weight 500 kg, length x width x height: 1180 x 650 x 1575 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

in stock

€8,064.00*
pcs
AN-25 L airhammer
00667022
AN-25 L airhammer ram weight 25 kg hit energy 0.27 kJ, horiz. clearance 235 mm, free height of working area 240 mm, number of strokes 250 strokes/min, electric power 3,0 kW, three-phase 3 x 400 Volt, total weight 1040 kg, length x width x height: 1470 x 740 x 1835 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

Available in 120 days, delivery time 2-5 days

€10,490.00*
pcs
AN-40 L airhammer
00667042
AN-40 L airhammer ram weight 40 kg hit energy 0.53 kJ, horiz. clearance 270 mm, free height of working area 245 mm, number of strokes 245 strokes/min, electric power 4,0 kW, three-phase 3 x 400 Volt, total weight 1300 kg, length x width x height: 1650 x 800 x 1920 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

Available in 120 days, delivery time 2-5 days

€14,553.00*
pcs
AN-55 L airhammer
00667052
AN-55 L airhammer ram weight 55 kg hit energy 0.7 kJ, horiz. clearance 300 mm, free height of working area 270 mm, number of strokes 230 strokes/min, electric power 7,5 kW, three-phase 3 x 400 Volt, total weight 1720 kg, length x width x height: 1860 x 880 x 2100 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop, mounted on steel base.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

Available in 120 days, delivery time 2-5 days

€19,835.00*
pcs
AN-75 L airhammer
00667072
AN-75 L airhammer ram weight 75 kg hit energy 1,0 kJ, horiz. clearance 330 mm, free height of working area 297 mm, number of strokes 210 strokes/min, electric power 7,5 kW, three-phase 3 x 400 Volt, total weight 2800 kg, length x width x height: 1620 x 930 x 2200 mm equipped with 2 combination dies (top/bottom), with motor-protection-switch and emergency-stop.   serial no. #N New / revised series of airhammers: No insertion of the dies into the bear -> enables the installation of extra wide dies increased projection of the C-frame -> larger working area Higher anvil weight -> larger counterweight to the bear

Available in 120 days, delivery time 2-5 days

€20,990.01*
pcs
option single-phase for AN-15-L
00667192
option single-phase for AN-15-L 230 Volts, 1-ph., 50 Hz motor power 2,2 kW,  current 17 A.   Do not connect with a plug but connect fix to the grid and use a circuit braker K25.

in stock

€279.00*
pcs
combination die for AN-9 top part
00667281
combination die for AN-9 top part designed by Uri Hofi with a flat but slightly convex part and a narrow face part total length 60 mm -width 35 mm

in stock

€225.01*
drawing die for AN-09 top part
00667287
drawing die for AN-09 top part R=8 mm, length 60 mm total length 60 mm -width 35 mm

in stock

€162.99*
crown die for AN-15 top part
00667313
crown die for AN-15 top part designed by Uri Hofi convex in length and width total length 70 mm -width 40 mm

in stock

€262.00*
fullering die for AN-15 top part
00667315
fullering die for AN-15 top part convex (L=110 mm), length 70 mm total length 70 mm -width 40 mm

in stock

€187.00*
large forming die for AN-15 top part
00667319
large forming die for AN-15 top part R=20 mm, length 70 mm total length 70 mm -width 40 mm

in stock

€187.00*
convex dome die for AN-15 top part
00667321
convex dome die for AN-15 top part R=35 mm, length 70 mm total length 70 mm -width 40 mm

in stock

€212.00*
flat die for AN-15 top part
00667323
flat die for AN-15 top part length 70 mm total length 70 mm -width 40 mm

in stock

€192.99*
Flat die extrawide upper for AN-55 L
00667415
Flat die extrawide upper for AN-55 L Dimensions (LxWxH): 135 x 90 x 100 mm, suitable for top and bottom.   Attention! The dies only fit in the new air hammer series AN-XX-L (from 2020, gray).

in stock

€415.00*
Wedge for top die AN powerhammer AN-09 Top
00667581
Wedge for top die AN powerhammer AN-09 Top

in stock

€26.00*
T-Nut for dies AN-09 and AN-15
00667595
T-Nut for dies AN-09 and AN-15 Height approx. 18 mm, bolt diameter approx. 10 mm

in stock

€12.00*
Nut for dies AN-09 and AN-15
00667598.091
Nut for dies AN-09 and AN-15 approx. 12x26 mm

in stock

€12.00*
V-Belt for AN-09
00667775.09
V-Belt for AN-09 Special V-belt for air forge hammer AN-09 2 pieces are required for the AN-09   The very robust and reinforced design is suitable for use in the forge or workshop. The V-belts are used to transmit power to the motor and ensure that the machine runs optimally. The V-belt tension and the condition of the V-belts should be checked regularly. A V-belt change is necessary if the V-belt is porous or cracked. A squeaking noise can also be due to a defective V-belt.

Available in 30 days, delivery time 1-3 days

€24.00*
Guide plate for AN-15
00667779.15
Guide plate for AN-15 2x holes for countersunk screw, with oil grooves, 2 pieces are required for a revision

in stock

€49.00*