Blacksmithing tools from ANGELE - tools from professionals for blacksmiths, locksmiths and farriers

Forging
Forging tools

Forging tools

Good tools alone are no guarantee of good work, but they are much more fun to work with because:

Life is too short to work with bad tools!

Like all blacksmithing tools, our tools are extremely robust and will last for generations if used correctly. But here too, care should not be neglected in order to enjoy them for one or more lifetimes.

Skip category gallery

hammers

Swages

Tongs

Driving tools

Special swages

Blacksmith guillotine

Rivet tools

Divers tools

Handles

Filter products

Atelier Brummer
Kanca
Krenzer Schmiedehammer
Picard
Reisinger

32 mm
35 mm
40 mm
45 mm
50 mm
58 mm
60 mm

3 Kg
4 kg
5 kg
8 kg
100 - 200 g
250 - 400 g
500 - 800 g
500 - 1000 g
1000 - 1500 g
1250 - 1500 g
1250 g
1750 - 2000 g
2000 g
3000 - 5000 g
ab 1500 g

Hickory
Locust

6 + 8 mm
8 +10 mm
10 + 12 mm
12 + 14 mm
14 + 16 mm
18 + 20 mm
20 mm
22 mm

10 mm
15 mm
20 mm
50 mm
60 mm
70 mm
Ø 5 mm
Ø 10 mm
Ø 15 mm
Ø 20 mm
Ø 25 mm
Ø 30 mm
Ø 60 mm
Ø 80 mm

350 mm
450 mm
560 mm

25 mm
30 mm
35 mm

0 - 100 mm
0 - 150 mm
0 - 200 mm
0 - 250 mm

5 mm
6 mm
6 x 6 mm
6 x 12 mm
6 x 19 mm
6 x 25 mm
6 x 32 mm
6 x 35 mm
6 x 38 mm
6 x 45 mm
6 x 50 mm
8 - 10 mm
8 mm
8 x 8 mm
8 x 19 mm
8 x 20 mm
8 x 25 mm
8 x 38 mm
8 x 50 mm
8 x 57 mm
8 x 63 mm
10 - 12 mm
10 mm
10 x 6 mm
10 x 20 mm
10 x 25 mm
10 x 32 mm
10 x 38 mm
12 - 14 mm
12 - 22 mm
12 mm
12 x 6 mm
12 x 12 mm
12 x 25 mm
12 x 32 mm
12 x 38 mm
12 x 50 mm
14 mm
15 - 20 mm
15 mm
16 - 18 mm
16 mm
16 x 16 mm
17 - 22 mm
17 mm
17 x 10 mm
18 mm
19 mm
20 - 22 mm
20 x 6 mm
20 x 10 mm
20 x 12 mm
20 x 14 mm
20 x 20 mm
20 x 25 mm
22 mm
25 - 30 mm
25 - 40 mm
25 mm
25 x 6 mm
25 x 10 mm
25 x 12 mm
25 x 18 mm
30 - 35 mm
30 mm
30 x 20 mm
30 x 35 mm
32 mm
32 x 6 mm
32 x 10 mm
32 x 12 mm
35 - 45 mm
35 mm
35 x 28 mm
38 mm
38 x 6 mm
38 x 10 mm
38 x 12 mm
40 - 45 mm
40 x 45 mm
45 mm
45 x 6 mm
45 x 10 mm
45 x 12 mm
50 - 55 mm
50 mm
50 x 6 mm
50 x 10 mm
50 x 12 mm
57 mm
57 x 6 mm
57 x 10 mm
57 x 12 mm
63 mm
65 x 6 mm
65 x 10 mm
65 x 12 mm
70 mm
75 mm
Ø15 mm / Ø25 mm / Ø35 mm
Ø35 mm / Ø45 mm

300 mm
400 mm
500 mm

2 mm
3 mm
4 mm
5 mm
6 mm
7 mm
8 mm
9 mm
10 mm
12 mm
16 mm
20 mm

0,1 kg
0,2 kg
0,3 kg
0,4 kg
0,5 kg
0,6 kg
0,8 kg
0,9 kg
0,25 kg
0,34 kg
0,35 kg
0,55 kg
0,75 kg
0,85 kg
0,175 kg
0,375 kg
1,0 / 1,25 kg
1,0 kg
1,1 kg
1,5 / 2,0 kg
1,5 kg
1,25 kg
1,30 kg
1,70 kg
1,75 kg
2,0 kg
2,5 kg
2,10 kg
3,0 kg
4,0 kg
5,0 kg
6,0 kg
8,0 kg
10,0 kg
175 g
310 g
550 g

15 mm
20 mm
21 mm
22 mm
26 mm
30 mm
40 mm
100 mm

Minimum €

–

Maximum €

Items 1–24 of 271

Blacksmith's hammer

00541001

short german shape, with ash handle These forging hammers are individually free form forged in the last historical tool factory "Krenzerhammer". This is the last historical tool factory in the valley of the Ennepe (Germany).

From €27.00*

Blacksmith's hammer

00541000

short german shape, with ash handle

From €58.00*

Blacksmith's hammer "Krenzer" chrome-plated

00541030

€120.00*

Exclusive hammer

00545110

hand-forged, selectively hardened, twice tempered, ground on the fin and face, with ash handle. A quality product from the Balbach Damascus forge. The hammers are individually free-form forged without a die and made from high-quality tool steel. Selective hardening keeps the shell soft, and the ergonomic shape, combined with good weight distribution, allows for less tiring forging. The hammers are tempered twice and then finely ground on the fin and face. The handle, made of robust robinia, fits comfortably in the hand and is secured with an iron wedge for a secure grip. Features: Ergonomic shape Good weight distribution Individually forged by hand Free-form forged High-quality tool steel Selectively hardened and tempered twice Hard face/fin Soft shell Robust robinia handle

From €134.90*

Exclusive streight pein hammer

00545124

From €139.90*

Habermann hammer 1,3 kg

00545133

optimized form by the rich experience of Alfred Habermann, short form with optimised balancing, face 45x45 mm, with short and thin wooden robinia handle Alfred Habermann was one of the most influential master smiths of the 20th century. He was not only a great blacksmith and designer also he was a "world traveler" in the interest of blacksmithing. He gave coursest on almost every continent and set fire to the modern metal design and young people. Alfred Habermann had a wealth of experience in the artisanal production of perfect forging tools. He analyzed the requirements for the tool and the conditions of the human body. This resulted in a series of ergonomically optimized and functional tools, which we manufacture and sell exclusively in small batches.

€70.00*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

pcs

Hammer 1,3 kg in stainless steel (type Habermann)

00545143

with wooden robinia handle optimized form by the rich experience of Alfred Habermann, short form with optimised balancing material 1.4021, the hardness of the face reaches only about 48 HRC

€129.00*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

pcs

streight pein hammer "Krenzer"

00548310

From €29.00*

Streight pein hammer

00548340

From €62.90*

Engineers hammer

00549300

From €21.00*

Hammer swedish form

00549040

From €48.00*

locksmith's hammer

005492200

DIN 1041, with ash handle, length 300 mm · Forged, hardened and tempered · Made of the best tempering steel · Face and tiller cleanly ground · Edges broken as required · Hammer head in accordance with DIN 1041

From €13.90*

japanese hammer "Krenzer"

00545090

handforged, with ash handle These forging hammers are individually free form forged in the last historical tool factory "Krenzerhammer". This is the last historical tool factory in the valley of the Ennepe (Germany).

From €52.00*

japanese Exklusiv hammer 1 kg

00545101

individually handforged head lenght approx 120 mm, with robinia handle A quality product from the Balbach Damascus forge. The hammers are individually free-form forged without a die and made from high-quality tool steel. Selective hardening keeps the shell soft, and the ergonomic shape, combined with good weight distribution, allows for less tiring forging. The hammers are tempered twice and then finely ground on the fin and face. The handle, made of robust robinia, fits comfortably in the hand and is secured with an iron wedge for a secure grip. Features: Ergonomic shape Good weight distribution Individually forged by hand Free-form forged High-quality tool steel Selectively hardened and tempered twice Hard face/fin Soft shell Robust robinia handle

€139.90*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

pcs

hammer 1500 g with NERTECH, 50 mm

00548450

french form, NERTECH handle Forged head made of C45E steel, with inductive heat treatment of the working surfaces (approx. 54 HRC). Finely polished fin and face. Quadruple carbon composite shaft with unbreakable fiberglass core, carbon fiber, vibration-damping polypropylene and elastomer injection for extra grip.

€54.00*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

pcs

safety hammer 500 g

00548910

german form with hickory handle, face electro-inductive tempered

From €32.90*

Workbench hammer

00549030

Danish pattern – with a round face and short peen and hickory handle

From €23.00*

Tip

DuoHammer Ultratec

00549180

combination of soft-faced and locksmith's hammer, with extremely robust handle with unbreakable fiberglass core, with replaceable plastic inserts #varinfo

From €39.90*

soft-head hammer 32 mm

00549183

with wooden handle with replaceable plasic inserts, head diameter 32 mm

€12.99*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

pcs

Copper hammer

00549150

From €22.00*

Rawhide Hammer

00549160

From €72.00*

rivet header, set 2-10 mm

00518321

octagon, Chrome-Vanadium, DIN 6435 Set of 7 pieces, consisting of rivet header 2,3,4,5,6,8,10 mm The rivet head makers in a set, in a practical plastic box made from 100% recycled plastic. The rivet head makers in a set, in a practical plastic box made from 100% recycled plastic. Octagonal shaft Burned-enamel finish Chrome-vanadium air-hardening steel Selectively hardened Hammer head tempered Curving, beading, and chipping are virtually eliminated thanks to the selective hardening process The classic - MADE in Germany!

€59.90*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

set

Rivet header

00518320

From €5.00*

Rivet base

00518345

for rivets with a shaft diameter of 2-20 mm, made of hardened tool steel, approx. 100x100x20 mm The rivet base makes riveting easier and the shape of the rivet head is retained even with strong blows. made of hardened tool steel safe and stable support plate quick and easy riveting counter borehole for quick attachment in the square hole of the anvil, on the workbench or in a leg vice flexible to use suitable for rivets with shank diameter: 2, 3, 4, 5, 6, 8 mm (DIN 660) and 10, 12, 16, 20 mm (DIN 124)

€125.00*

Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

pcs

Items 1–24 of 271