for blower type RD-2 with 1 outlet ø 100 mm, to connect alu-hose ø 100 mm, with clip, bolts und nuts

  with 2 outlets dia. 50 mm for blowers type RD-2, to connect the alu-hose, with clips, bolts und nuts

  with 3 outlets dia. 50 mm for blowers type RD-2, to connect the alu-hose, with clips, bolts und nuts

  for blowers type RD-2, with 4 outlets dia. 50 mm to connect the alu-hose, with clips, bolts und nuts

  inner dia. ø 46 mm for blowers type RD-0 and RE-0, for fitting on the blower discharge flange, bolt circle diameter 75 mm

  inner dia. 65 mm for blowers type RD-10 and RE-10, for fitting on the blower discharge flange bolt circle diameter 95 mm

  inner dia. 100 mm for blower type RD-2, for fitting on the blower discharge flange, bolt circle diameter 139 mm

  for blowers type RD-0 or RE-0, for fitting on the blower discharge flange

  for fans type RD-10 and RE-10, necessary when installing the throttle valve type 10 (00328041) in combination with the hose connector 1-50 / 1-50-50

  for fans type RD-10 and RE-10, 2 pcs necessary when installing the throttle valve type 10 (00328041) in combination with the hose connector 1-50 / 1-50-50

  3 plies, inflammable flexible air connection between blower and hearth sole

  3 plies, inflammable flexible air connection between blower and hearth sole

  3 plies, inflammable flexible air connection between blower and hearth sole

  for suspension of stainless steel (4301), for portable forges or gas forges, volume 13 litres

  for suspension, volume 25 litres of stainless steel (1.4301)

  of stainless steel (1.4301) with 4 wheels, 2 of it with break, 780 x 400 x 400 mm

  galvanized steel, XX L, approx. XX cm diameter, approx. XX cm height   Heat-resistant Ideal for quenching ash Robust design Good stability Universally applicable Material: galvanized sheet steel With galvanized metal handle   Also perfect for safely cooling hot ash! Older people among us still remember the inscription on plastic trash cans: "Do not fill with hot ash."

  robust, durable, sustainable Diameter at top approx. 45 cm Diameter at bottom approx. 37 cm Height approx. 60 cm   Properties: robust & durable oak wood from sustainable forestry (PEFC certificated) oiled with linseed oil glued staves 100% made in Germany   Very robust tub made from seasoned oak staves, produced in Germany. This oak comes from the Palatinate Forest and is PEFC certified. PEFC guarantees that the wood products come from sustainably managed forests.   The staves are dressed according to cooper tradition, processed into a tub and then glued together. Treatment with linseed oil gives them a silky matt shine.   Stabilized by galvanized tires and two stainless steel handles on the side for easy transport.

  fitting for 13-liters bath, total length 670 mm, made of stainless flat steel

  fitting for 26-liters bath, total length 970 mm, made of stainless flat steel

  for fire pans size 2 - 6 steel constuction, with air valve, nozzle regulation and ash cleaner

  for fire pan size 7 steel constuction with double air compartment with 2 air valves and 2 ash cleaners   Fig. 2 shows the bottom part with the hose connector 328001, which is not included in the scope of delivery and optionally available as an accessory.