with 2 pointed hornsa nd upsetting foot, of alloyed steel, hardened, surface planed, square hole 25 mm for anvil tools, round holes (Ø20 mm/ߠØ16 mm/Ø12 mm) face width XX mm, face length XX mm, total length XX mm, height XX mm   This anvil shape is probably a mixture of a South German and Swiss anvil. Due to the upsetting and anvil, this anvil is very flexible in use and offers many advantages. The different sized holes save going to the perforated plate for many tasks.   Characteristics: upsetting foot high hardness round horn various round holes square hole quality casting   This form was developed by Bruce Beamish, who also personally takes care of the professional manufacture of the anvils. With the help of modern manufacturing methods, a reliable casting process and the selection of the right material, a very good quality of the anvils is ensured. All anvils are tested for hardness and subjected to a high quality check.

 with foot plate approx. 230 kg of special alloyed steel, surface with small curvature, rectangular form, 350 x 240 mm, height 400 mm

  of special alloyed steel, surface with small curvature, also available with plane surface, rectangular form, 350 x 280 mm, height 350 mm

  of special alloyed steel, surface with small curvature cylindrical form, diameter 250 mm, height 150 mm weight approx. 65 kg

  drop forged and hardened jaw width 125 mm, jaw opening 100 mm, face width 95 mm, length of horn 135 mm, total length 350 mm, height 138 mm, foot 140 x 160 mm, with square hole 22 mm for anvil tools

  steel construction for sand filling, with woodden insert, with bow for suspension of tools.

  for anvil size 120 kg solid welded steel construction, heavy 400-mm-steel-plate, solid standing with three legs, optimiced to receive the Hofi anvil.

  adapted to the anvil size solid welded steel construction, heavy steel-plate, solid standing with three legs, height customized to your needs   We manufacture this anvil base exactly according to your wishes - please ask! The pictures are examples, each stand is made individually according to customer's requirements. The price may therefore differ!

    Please note: Wood is a natural material and reacts to changes in humidity by swelling or shrinking. Our wooden bases are glued to a high quality and well stored and they only warp a little. But they can have cracks. This does not affect functionality. In addition, a stainless steel band ensures stability.    

round magnet ø 80 x 18 mm with hole ø 6,5 mm For fixation on an anvil for noise reduction   Some anvils are “ringing” very loudly. You can often avoid this unpleasant noise by positioning it differently (on wood, in the sand, etc.). An alternative is to attach a strong magnet to the anvil, which changes the vibration properties and can therefore also positively change the sound.     Note: Magnets produce a far-reaching, strong magnetic field. Do nothing magnetic in the near of cardiac pacemakers and implanted defibrillators or magnetic hard drive.

round magnet ø 100 x 22 mm with hole ø 10,5 mm For fixation on an anvil for noise reduction   Some anvils are “ringing” very loudly. You can often avoid this unpleasant noise by positioning it differently (on wood, in the sand, etc.). An alternative is to attach a strong magnet to the anvil, which changes the vibration properties and can therefore also positively change the sound.     Note: Magnets produce a far-reaching, strong magnetic field. Do nothing magnetic in the near of cardiac pacemakers and implanted defibrillators or magnetic hard drive.

  consisting of roll holder + handles for all common anvil bases   Features: makes every anvil mobile quick movement of the anvil easy assembly made of stainless steel can be mounted on all standard wooden or steel bases     Note: Mounting screws not included Figure 2 shows the mounting kit mounted on a wooden base. This is not included in the scope of delivery.

  height approx. 1400 mm diameters: top 50 mm, bottom 320 mm, flange diameter: 460 mm, of special cast iron, worked surface, weight approx. 140 kg

  for hole plate 350 x 350 mm for a working height of approx. 800 mm, made of strong angle iron.   Features: Secure hold of the perforated panel Ergonomic working height Panel can be positioned in various ways Proper stand in both horizontal and vertical positions Stable welded construction Very robust design Powder-coated finish Frame can be fixed to the floor Accessible with a pallet jack   The shown plate is not included in the price. We can also manufacture custom sizes or adjust the working height upon request.

  for hole plate 400 x 400 mm for a working height of approx. 800 mm, made of strong angle iron.   Features: Secure hold of the perforated panel Ergonomic working height Panel can be positioned in various ways Proper stand in both horizontal and vertical positions Stable welded construction Very robust design Powder-coated finish Frame can be fixed to the floor Accessible with a pallet jack   The shown plate is not included in the price. We can also manufacture custom sizes or adjust the working height upon request.

  for hole plate 600 x 250 mm, for a working height of approx. 800 mm, stable welded construction, accessible with a lift truck, allows the perforated plate to be rotated quickly and easily.   The swage hole plate shown in "gray" is not included in the scope of delivery and is sold separately.

  350 x 350 x 80 mm, 60 kg made of special cast iron, and radius at the sides, surface planed, with various round and square holes, for horizontal or vertical use,

  400 x 400 x 100 mm, 80 kg made of special cast iron, one surface planed, with various round and square holes, and radius at the sides, for horizontal or vertical use

  600 x 250 x 60 mm, 55 kg made of hardened special steel (three-layer), with various round and square holes, radius at the sides, for horizontal or vertical use.   Reimagined OurHole and swage plate is designed and implemented differently than the "ordinary" plates you know from blacksmithing workshops. Due to difficulties in sourcing materials, delivery and quality issues, and long foundry lead times, we came up with the idea of ​​a modular design for the perforated and die-casting plate.   Built to Last For this, in addition to modern production machinery, we use a highly wear-resistant and hardened steel that surpasses cast plates in terms of hardness and toughness. Thanks to the modular design, the main work surface can be easily replaced after many years of use and inevitable wear and tear.   Extensively Tested In cooperation with experienced blacksmiths and professionals, we extensively tested the perforated and die-casting plate in combination with the rotating frame, putting it through its paces and being completely satisfied.   Features: Hardened steel High abrasion resistance Very wear-resistant Stable construction Rotatable and flexible in use Usable on both sides Replaceable plates when worn Round, square, and rectangular holes Radius and square notches on the end faces   The perforated plate is supplied without a rotating stand, which is available as an optional accessory.   The transitions between the individual plate elements may be slightly noticeable, but this does not affect subsequent work.     TIP: Looking for a larger/smaller plate with custom or different hole shapes? Feel free to contact us; we'll be happy to provide you with a quote.

  dimension 790 x 1000 x 590 mm solid steel construction, powder-coated with several storage shelfs and magnet, with 2 rolls for easy moving in the workshop   Delivery without tools

  Featuring various working surfaces, milled and hardened from tool steel; leveling surface, V-block, bending edges, forming grooves, dishing depressions, boreholes, square mounting sockets (20 x 20 and 28 x 28); Dimensions: 120 x 120 x 120 mm, 10 kg, burnished finish.   Back in Stock!   Features: Milled from tool steel Hardened for long service life Blackened (burnished) finish Compact dimensions   Working Surfaces: Flattening surface: 120 x 120 mm, flat 1x Square socket: 20 x 20 mm 1x Square socket: 28 x 28 mm Square sockets feature spring-loaded plates 90° V-groove (Prism): 20 mm deep Bending edge: Continuous Mounting hole: Ø 13 mm, 60 mm deep Swaging groove: R 20, 20 mm deep Forming groove: R 10, 10 mm deep Dishing depression: Ø 75 mm (R 55) Forming depressions: R 3, 6, 8, 10, 12, 14, 18 mm Holes: Ø 3, 4, 5, 6 mm — 15 mm deep Holes: Ø 13 mm — 50 mm deep     Compared to the older variant, this version is not cast, but rather milled from a solid block of tool steel. Subsequently, the part is hardened and blackened. This manufacturing process results in superior surface finish and hardness compared to the previous model.

  120 x 120 x 120 mm, 10 kg