Electric heating

Electrically heated ovens can be used in a variety of ways in industry, crafts and hobbies. For drying, as a glass, enamel or ceramic kiln, as a laboratory oven, in dental technology, but also for hardening and tempering and also for forging.

The advantage over gas or even coal is the cleanliness of the heat source. No contaminants get into the workpiece and the electric ovens also enable the user to work cleanly.

In addition, by choosing the "right" electricity provider or the option of producing the electricity yourself, "clean" electricity from renewable energy sources can also be used and forging can be done with a low carbon footprint...

We rely on well-known manufacturers from Germany and Europe. In addition to standard ovens, we can also offer custom-made products, just ask us if you are looking for something special.

EF-Electric kiln

PV-Electric kiln

electric kiln EF 150-0

00181031

electric kiln EF 150-0 power input 1.2 kW External dimensions (LxWxH) 375x260x300 mm, Combustion chamber (LxWxH) 195x160x85 mm, Combustion chamber volume 2.4 l Powerful muffle furnace with all-round heating in a compact design, equipped with a thermal insulation plate in the swing door and a ceramic combustion insert. Maximum temperature: approx. 1100 °C Only operate with temperature controller (181081 or 181082)!

in stock

€625.00*

pcs

electric kiln EF 180-0

00181041

Electric oven EF 180-0 power input 2.0 kW External dimensions (LxWxH) 410x300x320 mm, Combustion chamber (LxWxH) 225x190x115 mm, Combustion chamber volume 4.6 l Powerful muffle oven with all-round heating in a compact design, equipped with a thermal insulation plate in the swing door and a ceramic combustion insert. Maximum temperature: approx. 1100 °C Only operate with temperature controller (181081 or 181082)! The kiln is suited for all firing techniques for firing temperatures from 400 °C to 1100 °C, e.g. for firing glass, enamels and ceramics, as well as for annealing and hardening of metals and tools. The kiln is not suitable for incinerating organic materials, which requires a kiln with an extractor.

in stock

€839.00*

pcs

electric kiln EF 180-0 long

00181051

electric kiln EF 180-0 long power input 2.4 kW, electrical connection: 230 V~, 2400 W, 10 A External dimensions (LxWxH) 530x300x320 mm, Combustion chamber (LxWxH) 340x190x115 mm, Combustion chamber volume 7.4 l Powerful muffle oven with all-round heating in a compact design, equipped with a thermal insulation plate in the swing door and a ceramic combustion insert. Maximum temperature: approx. 1100 °C Only operate with temperature controller (181081 or 181082)! The kiln is suited for all firing techniques for firing temperatures from 400 °C to 1100 °C, e.g. for firing glass, enamels and ceramics, as well as for annealing and hardening of metals and tools. The kiln is not suitable for incinerating organic materials, which requires a kiln with an extractor.

in stock

€1,190.00*

pcs

Temperature Controlling Device

00181081

Temperature Controlling Device with digital display of actual and set point 230 V/ 50 Hz / 3,5 kW, inkl. NiCr-Ni sensor, maximum temperature: 1200° C

in stock

€689.00*

pcs

Temperature Controlling Device with three temperature ramps

00181082

Temperature Controlling Device with three temperature ramps with digital display of actual and set point, 230 V/ 50 Hz / 3,5 kW, inkl. NiCr-Ni sensor, maximum temperature: 1200° C Temperature controlling device is an automatic process controlling device with a digital display for actual and set values, particularly suited for controlling the temperature of kilns for enamelling, melting, annealing and tempering as well as for firing ceramics, porcelain etc.A thermocouple serves as a sensor (supplied with the device). These controlling devices are used whenever temperatures are to be regulated over three phases (heating-up, full load, maintaining temperature).The kiln is directly plugged into the socket of the controlling device, which switches the kiln to an output of up to 3,500 Watts at 230 Volts (resistive load).

in stock

€803.00*

pcs

Temperature Controlling Device with three temperature ramps + memory

00181083

Temperature Controlling Device with three temperature ramps + memory up to 15 programs with up to 45 ramps each can be set, with digital display of actual and set point, 230 V/ 50 Hz / 3,5 kW, inkl. NiCr-Ni sensor, maximum temperature: 1200° C. Temperature controlling device is an automatic process controlling device with a digital display for actual and set values, particularly suited for controlling the temperature of kilns for enamelling, melting, annealing and tempering as well as for firing ceramics, porcelain etc. All kilns with a connection value of up to 3.6 KW can be operated with this controller. The controller enables the programming of 15 programs, each with up to 45 ramps, all freely adjustable as heating up/holding time/cooling down. A thermocouple serves as a sensor (supplied with the device). These controlling devices are used whenever temperatures are to be regulated over three phases (heating-up, full load, maintaining temperature).The kiln is directly plugged into the socket of the controlling device, which switches the kiln to an output of up to 3,500 Watts at 230 Volts (resistive load).

in stock

€949.00*

pcs

thermal element for temperature controlling device

00181089

thermal element for temperature controlling device suitable for 181081 or 181082

in stock

€135.01*

pcs

Ceramic plate 13 x 19 cm

00181093

Ceramic plate 13 x 19 cm

in stock

€30.00*

pcs

Plate (sieve) 18 x 12 cm

00181096

Plate (sieve) 18 x 12 cm

in stock

€20.00*

pcs

Blade support for hardening furnace

00181098

Blade support for hardening furnace made of 5mm stainless steel, suitable for 5 knife blades, approx. 110 mm wide, 50 mm high, 105 mm long Characteristics: Suitable for blades from approx. 90 mm length Blade width up to approx. 9.5 mm Allows easy, space-saving hardening or storage of knife blades * Delivery does not include the blades shown

in stock

€26.00*

pcs

Electric oven FT300 schwarz|black|noir, 1100 °C, einfach|simple|simplement

00182030.20.1100.1

Electric oven FT300 schwarz|black|noir, 1100 °C, einfach|simple|simplement Connected load 1,9 kW, 230V/1-ph External dimensions (LxWxH) 510x375x580 mm, Combustion chamber (LxWxH) 300x100x100 mm These electrically heated ovens are built especially for knife makers and blacksmiths by a small manufacturer in Italy. All devices listed here are operated with single-phase alternating current 230 volts, which means they can be used practically anywhere. The electric heating coils are visible in the combustion chamber, which means the ovens heat up very quickly. Insulation made of lightweight fire brick also ensures a moderate weight and thus shortens the heating time. All devices are equipped with a folding door and an integrated temperature controller. The application area of these ovens is in the temperature range from 400 to 1200 °C (depending on the variant). Features: easy to use folding door robust design temperature controller included fast heating time 230V/1-ph various variants Your choice: 1) Which color: yellow, red, green, blue, orange, black? 2) Which max. temperature: 1100°C or 1200°C variant? 3) Which controller: Programmable or simple temperature controller? The target temperature is set on the "simple" controller. The oven heats up to the set temperature and maintains it until the oven is turned off. The programmable controller can run 4 different temperature ramps (target temperature, heating time, holding time) one after the other and is therefore important for complex hardening tasks and a reproducible result.

Available in 8 days, delivery time 2-5 days

€1,351.00*

Details

Electric oven FT300 blau|blue|bleu, 1100 °C, einfach|simple|simplement

00182040.10.1100.1

Electric oven FT300 blau|blue|bleu, 1100 °C, einfach|simple|simplement Connected load 1,9 kW, 230V/1-ph External dimensions (LxWxH) 605x375x580 mm, Combustion chamber (LxWxH) 400x100x100 mm These electrically heated ovens are built especially for knife makers and blacksmiths by a small manufacturer in Italy. All devices listed here are operated with single-phase alternating current 230 volts, which means they can be used practically anywhere. The electric heating coils are visible in the combustion chamber, which means the ovens heat up very quickly. Insulation made of lightweight fire brick also ensures a moderate weight and thus shortens the heating time. All devices are equipped with a folding door and an integrated temperature controller. The application area of these ovens is in the temperature range from 400 to 1200 °C (depending on the variant). Features: easy to use folding door robust design temperature controller included fast heating time 230V/1-ph various variants Your choice: 1) Which color: yellow, red, green, blue, orange, black? 2) Which max. temperature: 1100°C or 1200°C variant? 3) Which controller: Programmable or simple temperature controller?

Available in 8 days, delivery time 1-3 days

€1,545.00*

Details

Electric oven FT500 blau|blue|bleu, 1100 °C, einfach|simple|simplement

00182055.10.1100.1

Electric oven FT500 blau|blue|bleu, 1100 °C, einfach|simple|simplement Connected load 2,2 kW, 230V/1-ph External dimensions (LxWxH) 755x375x580 mm, Combustion chamber (LxWxH) 550x100x100 mm These electrically heated ovens are built especially for knife makers and blacksmiths by a small manufacturer in Italy. All devices listed here are operated with single-phase alternating current 230 volts, which means they can be used practically anywhere. The electric heating coils are visible in the combustion chamber, which means the ovens heat up very quickly. Insulation made of lightweight fire brick also ensures a moderate weight and thus shortens the heating time. All devices are equipped with a folding door and an integrated temperature controller. The application area of these ovens is in the temperature range from 400 to 1200 °C (depending on the variant). Features: easy to use folding door robust design temperature controller included fast heating time 230V/1-ph various variants Your choice: 1) Which color: yellow, red, green, blue, orange, black? 2) Which max. temperature: 1100°C or 1200°C variant? 3) Which controller: Programmable or simple temperature controller?

Available in 8 days, delivery time 1-3 days

€1,924.00*

Details

Electric oven FT650 blau|blue|bleu, 1100 °C, einfach|simple|simplement

00182065.10.1100.1

Electric oven FT650 blau|blue|bleu, 1100 °C, einfach|simple|simplement Connected load 2,2 kW, 230V/1-ph External dimensions (LxWxH) 855x375x580 mm, Combustion chamber (LxWxH) 650x100x100 mm These electrically heated ovens are built especially for knife makers and blacksmiths by a small manufacturer in Italy. All devices listed here are operated with single-phase alternating current 230 volts, which means they can be used practically anywhere. The electric heating coils are visible in the combustion chamber, which means the ovens heat up very quickly. Insulation made of lightweight fire brick also ensures a moderate weight and thus shortens the heating time. All devices are equipped with a folding door and an integrated temperature controller. The application area of these ovens is in the temperature range from 400 to 1200 °C (depending on the variant). Features: easy to use folding door robust design temperature controller included fast heating time 230V/1-ph various variants Your choice: 1) Which color: yellow, red, green, blue, orange, black? 2) Which max. temperature: 1100°C or 1200°C variant? 3) Which controller: Programmable or simple temperature controller?

Available in 8 days, delivery time 1-3 days

€2,055.00*

Details

Electrical melting furnace AM2

00188111

Electrical melting furnace AM2 for automatically and constant controlled melting process. For melting small amounts of different metals and ready for use in a very short time. Power input: 1.0 kW, Maximum temperature: approx. 1.200 ° C ± 0.5%, electrical connection: single-phase AC 230 V, Crucible size: ø 55 x H 120 mm

Available in 30 days, delivery time 1-3 days

€1,523.00*

pcs

Electrical melting furnace ET 1 kg

00188130.1

Electrical melting furnace ET 1 kg for automatically and constant controlled melting process. For melting small amounts of different metals and ready for use in a very short time. Power input: 0,75 kW, Maximum temperature: approx. 1.150 ° C ± 0.5%, electrical connection: single-phase AC 230 V, External dimensions H x W x D: 200 x 210 x 360 mm, Crucible size: ø 50 x H 125 mm. Scope of delivery includes the melting furnace, crucible and crucible tong. Made in ITALY Stable and safe stand Ready for use in very short time with uncomplicated handling Insulating protection shield protects from direct contact with the furnace cover Digital and precise temperature control with PID temperature controller Graphite crucible with all-round groove for better handling Wide range of applications: for melting copper, bronze, gold, aluminum, and much more metals Maximum application temperature approx. 1150 ° C

in stock

€349.00*

Details

Revision kit for electric crucible furnace ET 1 kg

00188133.1

Revision kit for electric crucible furnace ET 1 kg This heating element is the heart of a crucible furnace and is exposed to extreme stress due to high temperatures. Depending on the frequency of use of the stove, this part must be replaced if it is defective. Characteristics: durable heating element for the "ET" series crucible furnaces powerful up to a melting temperature of approx. 1,150 °C the heating element can be changed independently and easily even heat distribution in the furnace and heating of the crucible

in stock

€298.00*

Details

Crucible tong for electric furnace crucible

00188135

Crucible tong for electric furnace crucible Suitable for crucibles from 1 kg to 4 kg

in stock

€49.00*

pcs