Ballistol Ceramic Dry Lubricant is distinguished by its white, dry film, completely free of oil, grease, or silicone. It is universally applicable to all materials and withstands extreme temperatures from -55 °C to +1,000 °C. This provides a long-lasting and clean lubrication solution that guarantees optimal performance even under the toughest conditions.   Our ceramic dry lubrication is ideal for static, sliding, and rolling friction applications and is versatilely used in:   Rollers, bearings, and slides Guide rails Cable pulleys Oven slides and telescopic guides Gears and plastic components   Application: Shake well before use. Spray onto the parts or surfaces to be lubricated or made sliding from a distance of 10–25 cm and allow to dry for a few minutes.

  Typical ranges of application:   Troubleshooting of electrical components Testing thermostats and termperature sensors as well as engine components such as carburetors and injection systems For repair purposes in industry For assembly of fittings with tightest tolerances For cooling of transistors. resistors and silicium diodes For shock freezing of rubber, foils and sticky residues, also for the remocal of chewing gum Prevents heat damage during brazing and soldering processes

  guarantees an application field from -100 to 1000 °C   provides sustained protection against corrosion, sealing, wear and seizing. It facilitates smoother connections for threads and clearances, prevents contact corrosion in differing metals, guarantees an application field from -100 to 1000 °C and is highly pressure resistant.

    Long time rust protection, for lubricating thread machines / cutting machines   Ideal for long-therm preservation, even at high air humidity and aggressive ambient air Contains no waxes

  with lid + clamping ring   ideal for our hardening oil.   Properties: bright inside/outside temperature resistant with carrying handle slightly conical shape, therefore stackable

Back-Up-Pad disk fibre disc Ø125 mm with thread mount M14, with clamping nut for fiber discs

Fiber disc Cubitron® grain #Varinfo 982C Cubitron II fiber disc Ø 125 mm

  50x1220 mm   Quality ceramic belt made by 3M™ Cubitron™   3M™ Cubitron™ II Cloth Belt 984F offers revolutionary performance with 3M Precision-Shaped Grain on a YF-weight polyester cloth backing. This high-performing belt contains a grinding aid, making it ideal for medium to high pressure applications on stainless steel and other exotic alloys, along with carbon steel, cobalt chrome, and nickel alloys.   The exceptionally fast cut and long life of ceramic grain make this belt ideal for industrial environments. It is also heat resistant, produces a uniform finish over the life of the product, and helps eliminate burning during end-grain sanding applications. The YF-weight cloth backing on the 3M™ Cubitron™ II Cloth Belt 984F provides durability, and the mineral is resin bonded to the backing for reliable performance - even under high heat and pressure.   Patented 3M™ technology ensures  exceptional cutting performance and cool grinding with higher productivity  Grinding processes with low heat input so that no stress cracks or discoloration occur  extremely long service life

  50x1220 mm   Quality sanding belt made of zirconium corundum on robust cotton fabric, with high removal rates without deep grinding marks on the workpiece.   Characteristics: Zirconium corundum grain high material removal rate robust cotton backing material highly resilient self-sharpening cool cut very good price-performance ratio   Universally applicable for unalloyed, low and high alloy steel, cast iron, aluminum alloys, brass and bronze. It can also be used for sanding wood.

  consist of: 10x grain 40 10x grain 60 10x grain 80 10x grain 120 10x grain 180 5x grain 240 3x grain 400 3x grain 800   Quality sanding belt made of zirconium corundum on robust cotton fabric, with high removal rates without deep grinding marks on the workpiece.   Characteristics: Zirconium corundum grain high material removal rate robust cotton backing material highly resilient self-sharpening cool cut very good price-performance ratio   Universally applicable for unalloyed, low and high alloy steel, cast iron, aluminum alloys, brass and bronze. It can also be used for sanding wood.   --------------------------------------------------     Polishing belt for use dry, wet or with abrasive paste Notice: The carrier material is made of cork - the belt therefore looks like a very coarse sanding belt, but is actually for fine sanding! Universally applicable for unalloyed, low and high alloy steel, cast iron, aluminum alloys, brass and bronze.

  consist of: 2x grain 40 2x grain 60 2x grain 80 2x grain 120 2x grain 180 2x grain 240 1x grain 400 1x grain 800   Quality sanding belt made of zirconium corundum on robust cotton fabric, with high removal rates without deep grinding marks on the workpiece.   Characteristics: Zirconium corundum grain high material removal rate robust cotton backing material highly resilient self-sharpening cool cut very good price-performance ratio   Universally applicable for unalloyed, low and high alloy steel, cast iron, aluminum alloys, brass and bronze. It can also be used for sanding wood.   --------------------------------------------------     Polishing belt for use dry, wet or with abrasive paste Notice: The carrier material is made of cork - the belt therefore looks like a very coarse sanding belt, but is actually for fine sanding! Universally applicable for unalloyed, low and high alloy steel, cast iron, aluminum alloys, brass and bronze.

  cermic fibre, heat resistant circle-diameter of holes: ø 240 mm outside dia. ø 280 mm, inside dia. 200 mm 6 hole ø 10 mm

  cermic fibre, heat resistant circle-diameter of holes: ø 340 mm outside dia. ø 380 mm, inside dia. 300 mm 6 holes ø 10 mm

refractory concrete 1650 °C, #Varinfo for building or repairing gas forges, Temperature resistant up to approx. 1650 °C   Characteristics: High thermal shock resistance Max. application temperature approx. 1650 ° C Good heat storage capacity High resistance against borax or other fire welding utilities   typical applications: Gas furnace Gas forge Melting furnace kiln   Note: The gas furnace should be lined with approx. 10-20 mm of refractory concrete in order to achieve good heat storage with a moderate heating time.   Attention! Please note the information in the download area!  

  Heat protection mat with special coating, protects against direct flame, welding spatter, or molten metal splashes.   Ideal as a base for electric or gas furnaces. Protects the workshop floor, workbench, and surrounding flammable objects. Can also be used as a protective mat for mold boxes during casting.   Features: · Very good resistance to sparks, flames, welding spatter and molten metal splashes Certified and approved according to DIN EN standards FM-Approved FM Global Reversible Extreme heat resistance Continuously heat resistant up to 1000 °C, short-term peak load up to 1200 °C Excellent protective barrier Resistant to direct flames, sparks, weld spatter, and molten metal splashes Retains its shape and stability even under extreme heat · High mechanical strength Exceptionally robust and durable under harsh operating conditions Easy processing: Despite its high resistance, it is flexible, easy to cut, and easy to handle Fire protection: High-quality protective material for industrial and fire protection applications Welding and grinding work: Use as an effective welding curtain or welding blanket Shipbuilding and plant construction: Protection against sparks and thermal stress in sensitive areas Metal industry: Protection against intense heat and dangerous metal splashes to increase workplace safety   Maximum heat protection: Suitable for application temperatures up to 1200 °C and even resistant to molten metal splashes. The special mineral protective layer acts like a shield: At extreme temperatures, it melts away on the surface, reliably protecting the core of the fabric from flames and dangerous metal splashes. The backing is non-combustible and perfectly suited for vertical and horizontal applications in welding or plasma cutting. It reliably protects against weld spatter, sparks, direct flames, and molten metal splashes.     Other sizes and variations with eyelets and more can be made upon request.

Refractory Mortar 1600 °C, #Varinfo for "plastering" the induction coil, Temperature resistant up to approx. 1600 °C   This mortar is ideal for protecting the induction coil. After covering the copper tube with a glass fiber tube, the finished coil is dipped into the mortar or "plastered" with it. This protects it from slag or melt and significantly increases its service life.   Characteristics: high adhesion thin layer thickness (approx.1-3 mm) easy processing high thermal shock resistance max. application temperature approx. 1600°C good resistance to borax or other fire welding agents   Scope of application: induction coil Repair work in stoves/hearths   Notice: Mixing ratio approx. 250 ml Water per 1 kg Refractory Mortar Attention, our refractory concrete (59104001) is not suitable for plastering the induction coil.

  for P-301, P-302 and GTO25 as replacement, Format 100x100, thickness 6 mm

  for building or repairing of gas forges, Classification temperature 1250 °C   Characteristics: Very good insulating Very good thermal shock resistance Easy installation Max. application temperature approx. 1250 ° C   typical applications: Gas furnace Gas forge Melting furnace kiln   Note: The gas furnace should be lined with approx. 50-100 mm of insulation in order to achieve a good insulation effect. We recommend cladding the wool with fireproof concrete to avoid mechanical damage. Refractory concrete also protects the wool from wear when borax or welding powder is used.   Attention! Please note the information in the download area!

    How does it work? After receiving your order, we will create a shopping voucher that we will send to you as a .pdf. There is a voucher code printed on it, which the “recipient” can then easily use to shop in our webshop. If you wish, we can also send you a printed copy of the voucher, of course at no additional cost.   If this item is ordered individually, there are no freight costs - please select explicitly in the shipping method: "free shipping"   We would also be happy to issue you a voucher for a different amount - please just contact us.

  steel, with anvil in bronze, dimension 85 x 50 mm

  silver 925, with loop, dimension of anvil 29 x 13 x 18 mm

  silver 925, with loop, length of hammer approx 42 mm

Pendant "Thor's Hammer" (Mjöllnir) of bronze, with loop, length of hammer approx 42 mm

  with 2 short handles, strong quality, unbleached, natural     Fairtrade, GOTS and Blue Angel certified tote bag!   The tote bag made of organic cotton is of high quality and perfect for shopping. Even heavy objects can be transported safely. The stable, short handles are characterized by a high load capacity.   Characteristics: Color: natural Material: 100% cotton (organic) Width: 22cm Height: 25cm Carrying handle: 35 cm Food safe: yes   Care instructions: Wash at 30 °C (gentle), Do not bleach, Do not tumble dry, Iron at low temperature, Do not dry clean, Wash and iron inside out.