single piece, with silver lead
Pencil to mark any kind of surface even greasy, dirty or wet.
Marks are resistant to torch flames and highly visible during welding
welders slate pencil, wood-coated
pack with 12 pcs, with silver lead
Pencil to mark any kind of surface even greasy, dirty or wet.
Marks are resistant to torch flames and highly visible during welding
single piece, wood-coated
Pencil to mark any kind of surface even greasy, dirty or wet.
Marks are resistant to torch flames and highly visible during welding.
welders slate pencil, wood-coated
pack with 12 pcs, with red lead
Pencil to mark any kind of surface even greasy, dirty or wet.
Marks are resistant to torch flames and highly visible during welding
All-writer with soapstone lead
made of durable brass material
1 pcs lead holder with sharpener inside the push button,
with soapstone lead, ø 5,6 mm, length 120 mm
Soapstone lead for marking on metal and steel, welding and cutting up to 2.000 °C with a long lasting white, fireproof line, clearly visible even through welding goggles
made of durable brass material
Set consisting of:
2 pcs lead holder, each with sharpener inside the push button
5 pcs spare leads red allwriter, ø 5,6 mm, length 120 mm
10 pcs spare leads soapstone , ø 5,6 mm, length 120 mm
Red allwriter lead for marking on cold metal, steel and on almost any materials
Soapstone lead for marking on metal and steel, welding and cutting up to 2.000 °C with a long lasting white, fireproof line, clearly visible even through welding goggles
Heat-Stik® up to 1200 °C / 2200 °F
Marking range: 1800°F to 2200°F (982°C to 1204°C)
White-hot surface paint crayon writes on iron, steel castings, ingots, forgings, blooms, billets and high temperature metal alloys
Extra-wide hot surface marker lasts longer than competitive hot chalk, for extended writing life
Marks are readable even on white-hot steel for instant identification
Durable marks will not run, char, flow, discolor, peel or crack
Heat-Stik hot surface solid paint crayons are ideal for use when marking extremely hot steel. The marks will not burn off and remain readable and highly visible in all weather conditions.
Industry Marker, yellow
for professional, industrial use
For highly opaque marking of almost any materials such as metal, glass, plastic, stone, carton, tiles, wood
Waterproof, quick-drying ink
Marker for drill holes Duo
· Permanent marker and Marker for drill holes combined in one pen
· Marker for drill holes tip: extra long (25 mm), thin stainless steel tip with Ø 2 mm for marking drill holes and hard-to-reach areas
· Special shaped tip avoids slipping into the steel barrel
· Permanent marker tip: round tip 1.5 – 3 mm for marking and writing on almost any material, for example plastic, carton, metal, glass, rubber, wood…
· Fadeless, quick drying and waterproof on almost any surfaces
· Low smell ink without Xylene / Toluene
Steel scriber - ball pen design
with replaceable carbide tip
The steel-scriber for professional pockets.
The slim design ensures optimal handling and easy access to hard-to-reach places.
Thanks to the retractable carbide tip, there is no risk of injury when storing it in a jacket or trouser pocket.
The hard metal tip can be easily resharpened and should it be too badly worn, we naturally offer replacement refills.
Characteristics:
Carbide scriber in the shape of a ballpoint pen
with replaceable carbide tip
HM marking lead that can be retracted with a push button
with retaining clip for jacket or trousers
The company "SCALA" has been developing and producing first-class measuring tools "Made in Germany" for over 75 years.
Steel Scriber - handforged
made of C75, open-die forged, hardened,
one side straight, one side curved,
hardened and ground,
Length approx. 200mm
Forged for eternity!
The scriber for every bag and workshop.
Filigree, free-form forged, this scriber sits perfectly in the hand.
The slim design, which is curved on one side, ensures optimal handling and easy access to hard-to-reach places.
Forging and hardening C75 steel makes this scriber very hard and durable and should the point ever become blunt it can be easily resharpened.
Characteristics:
hand-forged
C75 - hard and resilient
nicely balanced
curly/straight side
First-class quality from a small German master forge.
with calibrated melting point
The marking melts when the precise temperature grade is reached, this change from a dry to a liquid state indicates the temperature.
Tempilstik is a simple, easy-to-use temperature indicator which is guaranteed accurate to +/- 1% of the rated temperature. It is ideal for a wide range of applications from surface temperature measurement during metal working procedures such as heat treating and welding to the measurement of operating temperatures of bearings or motors.
How to use:
Stroke the work piece during heating. When the rated temperature has been reached a distinct melt (smear) will become evident. Tempilstik will make a mark by melting at the point of contact once the surface reaches the specific temperature of the Tempilstik.Note: The color of Tempilstik is for identification only and has no relation to its performance as a temperature indicator.Ranges are available in the Fahrenheit line from 100°F to 2,500°F and 40°C to 1,200°C in the Centigrade line.
From
€18.00*
This website uses cookies to ensure the best experience possible. More information...