Forging
"Life is too short to work with bad tools"
With us you will find everything for your craft and hobby.
We develop and produce some products such as coal and gas forge fires here in Ochsenhausen - Germany.
We source tried and tested machines, high-quality tools and a whole range of other stuff such as paints, oils and tool steels from well-known manufacturers, blacksmithing experts and smaller manufacturers.
Ball swage hammer 1,0 kg length approx. 150 mm, without handle
forged of tool steel, diameter #Varinfo shaft approx. 25x25 mm, for fixation in the anvil. other diameters on request
forged of tool steel, diameter #Varinfo shaft approx. 25x25 mm, for fixation in the anvil. other diameters on request
for own forging material C 45, for tempering in water
Raw piece for hammers 1,5 kg for own forging material C 45, for tempering in water
for forging yourself approx. 50x30x160 mm Characteristics: Head size approx. 50x30x160 mm approx. 2,0 kg head weight Material C45 (forged) easy to forge and harden approx. 600 mm long handle This ax blank is specially produced for us in Germany. The eye has already been inserted and corresponds to the valid DIN standard. This means that standard handles for axes and hatchets fit. The long handle allows for a secure grip when forging and machining. After it has been individually shaped, it can simply be separated. We chose C45 as the material because it is easy to machine and forgives one or two mistakes. C45 can also be hardened well in water or oil.
for own forging shank 25 mm material C 45, for tempering in water
octagon, Chrome-Vanadium, DIN 6434 Set of 7 pieces, consisting of rivetting setter 2,3,4,5,6,8,10 mm The rivet head makers in a set, in a practical plastic box made from 100% recycled plastic. Octagonal shaft Burned-enamel finish Chrome-vanadium air-hardening steel Selectively hardened Hammer head tempered Curving, beading, and chipping are virtually eliminated thanks to the selective hardening process The classic - MADE in Germany!
consisting of: scythe hammer, scythe anvil and scythestone and book "Dengeln & Wetzen" With this set, you're perfectly equipped to sharpen and hammer your scythe. Instead of the combined individual prices of € 76,90 the set is only € 60,65 (german VAT applied).
0,5 kg with ash handle A workshop on how to properly sharpen a scythe can be found at: https://scythesupply.com/peeningworkshop.html
0,5 kg, with ash handle A workshop on how to properly sharpen a scythe can be found at: https://scythesupply.com/peeningworkshop.html
scythe hammer one peen, fine polished 0,5 kg with ash handle A workshop on how to properly sharpen a scythe can be found at: https://scythesupply.com/peeningworkshop.html
260x36x15 mm, Original SILICAR, grit size 220 More information and a workshop you can also find at https://scythesupply.com/peening-and-sharpening-european-scythe-blades.html
short A workshop on how to properly sharpen a scythe can be found at: https://scythesupply.com/peeningworkshop.html
short When peening with this anvil, the scythe is placed upside down (unlike when mowing) and struck with the flat face of the peening hammer. A workshop (in English) on how to properly peen a scythe can be found at: https://scythesupply.com/peeningworkshop.html
long spike, 1 kg total length about 320 mm, face dimension 50x50 mm A workshop on how to properly sharpen a scythe can be found at: https://scythesupply.com/peeningworkshop.html
long spike, 1 kg total length ~ 470 mm When peening with this anvil, the scythe is placed upside down (unlike when mowing) and struck with the flat face of the peening hammer. A workshop (in English) on how to properly peen a scythe can be found at: https://scythesupply.com/peeningworkshop.html
