22x43 mm (2 rings)

  with Hickory handle   Used to level saws. Forged head, made of high carbon C45E steel, with induction heat treatment of the working surfaces (approx. 54 HRC). Working surfaces domed and finely polished.

  chrome-molybdenum air-hardening steel, DIN 6453, Width of blade approx. #varinfo   This chisel is primarily suitable for cold working.

  manganese silicon steel length 240 mm, width 26 mm, thickness 7 mm, blade 3 mm

  made of aluminium, approx. 160 x 80 x 8 mm   It stands to reason that when two forces come together one or the other will show the result of the immpact....   When these marks of the impact are left in the anvil, it is annoying. Sharp, hard and pointed tools can leave marks on the anvil. For this reason, the protective pad is used when splitting, punching, and much more - shortly before piercing the workpiece - between the anvil and the workpiece to protect the path of the anvil.   This pad is easier and cheaper to replace than the whole anvil...

 for expanding the eye hole in hammer or axe heads total length approx. 400 mm, cutting edge approx. 18 mm   handforged and hardened, made from high quality tool steel 1.2344   Attention: Due to the geometry of the blade edge don't use the punch for splitting.

  with dia. 1 mm/2 mm/3 mm/4 mm /5 mm and centre punch dia. 4 mm ground and polished surfaces 6-piece set, in a metal case   Manufactured from high-alloy tool steel Fully hardened for maximum impact force transmission Special safety striking head prevents material chipping and deformation Polished surface Rounded edges Gold-colored dip-lacquered finish Meets or exceeds requirements of common standards (e.g., DIN) All metal parts are GS-certified supplied in a metal case   Tools comply with DIN 6458

  Made of special steel; ground and polished surface. 6-piece set, 150 mm length each, supplied in a metal case. Includes one pin punch each in sizes Ø 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, and 10 mm. For driving out or removing bolts, rivets, cotter pins, or other fasteners from through-holes, or for precisely countersinking the above-mentioned fasteners into the workpiece surface.   High-alloy tool steel, fully tempered Special safety impact head prevents material chipping and deformation High-gloss polished using an optimized process - no need for chrome Fully hardened for optimal force transmission Gold-colored dip-coated Rounded edges prevent damage to the workpiece Meets or exceeds the requirements of common standards (e.g., DIN) In a metal case

  with diameter 3 mm/4 mm/5 mm/6 mm /8 mm and 10 mm Made of special steel, fully hardened, with a ground and polished surface. 6-piece set; length: 150 mm each; supplied in a metal case. For driving out or removing bolts, rivets, cotter pins, or other fasteners from through-holes, or for precisely countersinking the above-mentioned fasteners into the workpiece surface.   Premium tool steel, fully tempered, hardness ≥ 58 HRC Special safety impact head prevents material chipping and deformation High-gloss polished using an optimized process - no need for chrome Fully hardened for optimal force transmission powder coated red Rounded edges prevent damage to the workpiece Meets or exceeds the requirements of common standards (e.g., DIN) In a metal case

    Features: 100% MADE in Germany For materials with a hardness of up to 68 HRC For precise marking of a drill point and for guiding the drill tip to prevent wandering Manufactured from high-alloy tool steel Through-hardened for maximum impact force transmission Special safety striking head prevents material chipping and deformation Polished working tip Brazed, precision-ground carbide tip Gold-colored dip-lacquered finish

  made of C75, open-die forged, hardened, hardened and ground, Length approx. 170 mm     For the robust application!   Stable and free-form forged, this center punch is extremely stable. The design ensures optimal handling. Forging and hardening the C75 steel makes these punches very hard and resilient and should the point ever become blunt it can be easily resharpened.   Characteristics: hand forged C75 - hard and resilient nicely balanced robust   First-class quality from a small German master forge.

    Concerted pair of split chisel and punch makes work easier. The change in length due to split and punch compensate each other. The workpiece retains his length and that makes it possible to punch many holes fast and quick.

  forged of quality tool steel, approx. 400 x 34 x 20 mm (LxWxH), with holes Ø 4, 5, 6, 8, 10,12 mm, one side counterbored, one side beveled, hardened and tempered   Features: Made of tool steel Hardened and tempered Forged handle Precisely machined holes One side countersunk One side chamfered   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  forged of quality tool steel, approx. 400 x 34 x 20 mm (LxWxH), with square holes 5, 6, 8, 10,12 mm, one side beveled, hardened and tempered   Features: Made of tool steel Hardened and tempered Forged handle Precisely machined holes One side countersunk One side chamfered   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, width of cutting edge ca. XX mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, width of cutting edge ~ 20 mm, for holes XXxXX mm or ØXX mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  forged of quality hot work steel W303, hardened and tempered, sharpened and polished, length about 220 mm, for square holes XxX mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  forged of quality hot work steel, hardened and tempered, sharpened and polished, length about 220 mm, for holes X mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry   These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  forged of quality hot work steel, smoothed, length about 200 mm, square approx. 10x10 - 30x30 mm   Features: Forged from hot-work steel Ground and polished Special geometry For drilling square holes Long service life thanks to high-quality tool steel     These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  forged of quality hot work steel, smoothed, length about 200 mm, Diameter approx. 12 - 32 mm   Features: Forged from hot-work steel Ground and polished Special geometry For drilling round holes Long service life thanks to high-quality tool steel     These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.

  handforged from high quality steel, forged, smoothed and polished by hand, Length approx. 120 mm   Features: Forged from hot-work steel Oil-hardened and tempered Ground and polished Special geometry     These special tools are forged in the Reisinger forge in the heart of the lower Mühlviertel in Austria according to the highest quality standards.   ...and if you want to learn more about Peter Reisinger and his family business, you can find more information in the "Manufacturer" tab.