incl. HSS bimetal blade   Features: Professional quality Sturdy square tube Rubberized pistol grip Square bolt for blade attachment HSS bimetal blade Quick blade change with wing nut Blade length approx. 300 mm

  incl. HSS bimetal blade   Features: HSS bimetal Long service life Precise cutting Blade length approx. 300 mm Blade thickness approx. 0.65 mm Blade height approx. 30 mm 24 TPI.

    6-piece file set: flat blunt half-round triangular square round flat-pointed   Features: with wooden handle 100 mm file length Precision quality Professional quality

  Cut 2   Universal workshop file for various materials and purposes. Cut 2 for universal use, such as surface finishing, deburring, and much more.   Features: Universally applicable Long service life Good stock removal performance Handle made of impact-resistant plastic Industrial workshop quality

  approx. 17x17 mm, approx. 19 mm height, thread #Varinfo, approx. 15 mm thread depth, raw surface.   The alternative to "ordinary" nuts allows for an original fastening of forged elements and ensures a beautiful appearance.

  forged, working face polished, length overall 375 mm

  forged, Working face polished, length overall 325 mm

  600 mm, weight 4 kg with flat surface and round and pointed horn, length overall 600 mm

  600 mm, weight 5 kg with flat-bowed surface and round - blunted  horn length overall 600 mm

  weight aprox. 6 kg with flat-bowed surface and round - blunted  horn length overall 700 mm

  800 mm, weight approx. 9 kg with flat-bowed surface and round - blunted  horn length overall 800 mm

  as support for doing repoussé work for sand filling, handmade of best resistant leather, sewed all around on the inside, with press button closing.

Soft pitch for repoussé work   Features: Made in Germany according to a traditional formula Easy to work with Safe to handle An ideal aid for repoussé work on copper sheets and other materials Available in various hardness grades Ensures results with sharp, precise contours Residues can be easily removed from the workpiece     Application: To embed a workpiece, the pitch is slowly heated until it becomes viscous. The pitch is then pressed into shape and, upon cooling, acquires its stabilizing firmness. Any residues remaining on the finished workpiece can subsequently be removed by carefully heating the piece with a heat gun or by using solvents.   Which pitch is used for what purpose? Soft: For deep repoussé work and large-scale deformations. Medium: The standard choice for most repoussé and chasing work. Hard: For very fine details and shallow reliefs.

  suitable for anvil holes from approx. 20 mm, approx. 170 mm total length   This tool is perfect for clamping workpieces directly onto the anvil. The size of tool is suitable for anvils from 20 kg and shaft clamps securely in the square hole. Workpieces up to a thickness of approx. 40 mm can be clamped.

  1x Blacksmith's 1,25 kg (541012) 1x Wolf's jaw tong 400 (538040) 1x Book "Schmieden lernen" (961110) - in German   Blacksmith's hammer 1,25 kg is the ideal standard hammer. The weight of the head is a good mean. The ash handle fits comfortably in your hand.   The Wolf's jaw tong 400 can be used universally for flat, round and square workpieces. This tong is ideal for 8mm workpieces, but you can also hold smaller and bigger ones.   Please note: The book "Schmieden lernen" is in German!

  1x Blacksmith's hammer 1,25 kg (541012) 1x Wolf's jaw tong 400 (538040) 1x Anvil 50kg (412250) 1x Book "Schmieden lernen" (961110) - in German   Blacksmith's hammer 1,25 kg is the ideal standard hammer. The weight of the head is a good mean. The ash handle fits comfortably in your hand.   The Wolf's jaw tong 400 can be used universally for flat, round and square workpieces. This tong is ideal for 8mm workpieces, but you can also hold smaller and bigger ones.   Anvil 50 kg 2 horns, drop forged and hardened, face width 110 mm, face length 230 mm length of horns each 160 mm, total length 550 mm, height 220 mm, foot 210 x 250 mm, with square hole 25 mm for anvil tools and round hole ø 23 mm.

  1x Blacksmith's hammer 1,25 kg (541012) 1x Wolf's jaw tong 400 (538040) 1x Portable forge type F600W (116001) 1x Book "Schmieden lernen" (961110) - in German   Blacksmith's hammer 1,25 kg is the ideal standard hammer. The weight of the head is a good mean. The ash handle fits comfortably in your hand.   The Wolf's jaw tong 400 can be used universally for flat, round and square workpieces. This tong is ideal for 8mm workpieces, but you can also hold smaller and bigger ones.   Portable forge type F 600 W, single phase 230 V, 30 W, for solid fuel (coal). Table top 600 x 500 x 4 mm, height 800 mm, complete with blower with switch, with power cable 3 m with plug (type F), complete with hearth sole with cast iron fire pan (inner top dim. 215 x 195 mm), air valve and ash-cleaner,bow for suspension of tools.

  1x Blacksmith's hammer "Krenzer" 1,25 kg (541013) 1x Wolf's jaw tong 400 (538040) 1x Portable forge type F600W (116001) 1x Anvil 50kg (412250) 1x Book "Schmieden lernen" (961110) - in German   Blacksmith's hammer 1,25 kg is the ideal standard hammer. The weight of the head is a good mean. The ash handle fits comfortably in your hand.   The Wolf's jaw tong 400 can be used universally for flat, round and square workpieces. This tong is ideal for 8mm workpieces, but you can also hold smaller and bigger ones.   Portable forge type F 600 W, single phase 230 V, 30 W, for solid fuel (coal). Table top 600 x 500 x 4 mm, height 800 mm, complete with blower with switch, with power cable 3 m with plug (type F), complete with hearth sole with cast iron fire pan (inner top dim. 215 x 195 mm), air valve and ash-cleaner,bow for suspension of tools.   Anvil 50 kg 2 horns, drop forged and hardened, face width 110 mm, face length 230 mm length of horns each 160 mm, total length 550 mm, height 220 mm, foot 210 x 250 mm, with square hole 25 mm for anvil tools and round hole ø 23 mm.

  "Forging Package Syntra" The set consists: 1x blacksmith's hammer 1.25 kg Krenzer (541013) 1x wolf's jaw tong 500 mm (538050) 1x Centre Punch with carbide tip (518550.4) 1x raw piece for hammers 0,6 kg (518106) 1x All-writer with soapstone lead (617144) 1x soap stone spare leads (617146) 1x welders slate pencil, wood-coated (617126) 1x Blacksmith glove L, Size 9 (98101017) 1x Aluminium rule, 2 meter, black (550516) 1x brass wire brush (550116) 1x wire brush steel (550117)   Blacksmith's hammer 1,25 kg is the ideal standard hammer. The weight of the head is a good mean. The ash handle fits comfortably in your hand.   The Wolf's jaw tong 500 can be used universally for flat, round and square workpieces. This tong is ideal for 12 mm workpieces, but you can also hold smaller and bigger ones.   Centre Punch with carbide tip 3. Length 120 mm, working edge with brazed, precision ground carbide tip.   Raw piece for hammers 0,6 kg, for own forging. Made of material C 45, for tempering in water. Easy to create your own split chissel or other tools.   All-writer with soapstone lead, made of durable brass material. 1 pcs lead holder with sharpener inside the push button, with soapstone lead, ø 5,6 mm, length 120 mm. Soapstone lead for marking on metal and steel, welding and cutting up to 2.000 °C with a long lasting white, fireproof line, clearly visible even through welding goggles.   welders slate pencil, wood-coated. Single piece, with silver lead Pencil to mark any kind of surface even greasy, dirty or wet. Marks are resistant to torch flames and highly visible during welding.   Blacksmith glove L (Size 9) made of bend leather, cuff inside made of grey flame retardant fabric, seamed with KEVLAR® yarn.   metallic rule, 2 meter, black anodized cold hammered aluminium special alloy, section 1.4 mm thick,  height 14 mm, mm-graduation, Digits and scale deep etched.   brass wire brush, dimensions 285x33 mm. Best suited for cleaning or deburring.   Wire brush steel, dimensions 285x33 mm, Best suited for derusting, cleaning, deburring or deslagging.

  The set consists: 1x wolf's jaw tong 400 mm (538040) 1x flat tong 400 mm (534040) 1x pick up tong 400 mm (531040) 1x round mouth tong 400 mm (537040) 1x band jaw tong 400 mm (534140)   With this forging-tong set you get the most important blacksmithing tongs in one package.

  making work easier, flexible handling due to C-frame design. Suitable for various tools (ideal for 20x50 mm), flexible and fast adjustment of the tools. Opening (height) C-frame 100 mm, Baseplate 120x250x15 mm   This helper allows various jobs if you are working alone. Finishing, settling, punching and much more ... fast and easy tool change suitable for different tool dimensions minimum tool width 39 mm / maximum tool width 57 mm With square hole for the anvil or mounting through holes in the workbench Flexibel handling due to the design   The forge guillotine is supplied without tools and square for the anvil. These are available separately as accessories.