for fixing the guillotine, riveting plate or other tools in the square hole of the anvil, Square 25 x 25 mm, length approx. 60 mm, incl. M10 cylinder head screw

  for fixing the guillotine, riveting plate or other tools in the square hole of the anvil, Square 30 x 30 mm, length approx. 60 mm, incl. M10 cylinder head screw

  made of C 45, untempered 50x20x150 mm   This blank die can be used to make your own tools and dies for the blacksmith guillotine. C45 is easy to forge and you could harden it in water or oil. For further information click the download tab.

  made of C 45, untempered 50x20x80 mm   This blank die can be used to make your own tools and dies for the blacksmith guillotine. C45 is easy to forge and you could harden it in water or oil. For further information click the download tab.

  forged of C 45, hardened 50x20x170 mm   The die is hardened on the cutting edge and soft on the other side.

  forged of C 45, hardened 50x20x100 mm   The die is hardened on the cutting edge and soft on the other side.

  forged of C 45, hardened radius ca. 10 mm, 50x20x150 mm   The die is hardened on the functional surface and soft on the other side.

  forged of C 45, hardened radius ca. 10 mm, 50x20x80 mm   The die is hardened on the functional surface and soft on the other side.

  for fixing blades when grinding, Ensuring a perfect grinding angle, adjustable without tools approx. 200 mm total width.     This knife sharpening aid enables easy and repeatable grinding/sharpening of knives and blades. Made of aluminum, with sturdy die-cast hinges and freely adjustable angle from 0°-30°, any required blade angle can be adjusted. The flexible hole pattern also enables complex geometries to be clamped. Using knurled screws and quick releases, the grinding aid can be adapted to the geometry of the part to be ground without tools. Stable handles and special slideways on the underside enable a secure hold when sanding and easy gliding on the sanding table. With a width of approx. 200mm, small and large blades can be ideally fixed.   Features: quick, tool-free adjustment to the blade geometry flexible adjustment using hole grid/elongated holes secure fixation of the blade play-free adjustment and fixation Angle freely adjustable from 0°-30 made from aluminum Robust hinges made of die-cast perfect handling safe grinding side notches to check the angle   Dimensions: approx. 200 mm wide approx. 90 mm high approx. 120 mm depth   Notice: When sanding for the first time, the terminal strip may be slightly sanded down, which has no effect on its function. The blade shown is not included in the scope of delivery.

  is applied as a protection coating for objects subject to heavy corrosion as well as for the repair of damaged galvanised surfaces.   SCHUPPENPANZER-Zinkschutz, a zinc protection coat, effectively protects iron against corrosion, even without subsequent re-coating. The material’s high metallic zinc content guarantees cathodic protection.    Due to the material’s electro-chemical corrosion protection, no subsurface corrosion occurs should the coating be damaged.  Two-layer application is advisable for objects with strong surface roughness.

    To provide guidance when selecting scale armor colors. We always recommend creating a test area.   The colors shown are for guidance. Deviations from the original colors cannot be ruled out due to printing technology.   If the color card is returned without damage, you will receive a refund of the purchase amount.

  Special cleaner for galvanized surfaces     Characteristics: especially suitable for galvanized surfaces ensures ideal adhesion of paint or varnish prevents the paint from peeling off prematurely optimal brightening of old zinc surfaces extreme cleaning power for heavy dirt highly concentrated - long range Removes rust stains, soot, grease, and much more.   It is an acidic concentrate for cleaning hot-dip and galvanized surfaces. It removes flux residues and oxidation products such as rust stains, has an active cleaning effect and removes dirt, soot, grease and oil. It passivates and phosphates so that paints adhere better. This process prevents the paint from peeling off prematurely.   Application: Dilute the zinc cleaner in a ratio of 1:10 to 1:20 with cold water. Then apply with a brush or brush to the surface to be cleaned, Leave on for about 5 minutes and rinse with clean water. If the soiling is very severe, the process must be repeated. Dry well after cleaning.     Notice: Zinc Cleaner Forte must not come into contact with acid-sensitive materials such as marble. When cleaning, always proceed gradually to prevent drying during the exposure time. Carry out a preliminary test in a hidden location.

  with 2 wheels can be placed under the blacksmith's forge, contents about 50 litres, width 500 mm, depth 680 mm, height 285 mm

  length approx. 100 mm pack with 25 pieces   Slate pencil – a classic – ideal for sketching   Advantages: Excellent feel Made of solid slate Harder than comparable pencils, therefore precise lines Easily correctable – erasable Very break-resistant compared to chalk or soapstone No smudging Adjustable tip for fine outlines or broader shading Purely natural product – a sustainable way to sketch

  for sharpening/pointing worn slate pencils   Features: Specifically designed for slate pencils Enables precise sharpening For sharpening/pointing worn slate pencils Sturdy metal part Body made of plastic From small-scale handcrafted production Made in Germany   Background information: This is a "rubbing pencil sharpener", meaning the tip is not cut with a blade as with a regular pencil sharpener, but rather rubbed - just like in the old days.

  pack with 24 pieces, white lead

  single piece, white lead

  single piece, with silver lead Pencil to mark any kind of surface even greasy, dirty or wet. Marks are resistant to torch flames and highly visible during welding

  pack with 12 pcs, with silver lead Pencil to mark any kind of surface even greasy, dirty or wet. Marks are resistant to torch flames and highly visible during welding

  single piece, wood-coated   Pencil to mark any kind of surface even greasy, dirty or wet. Marks are resistant to torch flames and highly visible during welding.

  pack with 12 pcs, with red lead Pencil to mark any kind of surface even greasy, dirty or wet. Marks are resistant to torch flames and highly visible during welding