marks metal surfaces up to 2000°C / 3632 °F 10x10x100 mm

  marks metal surfaces up to 2000°C / 3632 °F 10x10x100 mm

  ø 12 mm, length 120 mm perfect for designing and sketches

  made of durable brass material 1 pcs lead holder with sharpener inside the push button, with soapstone lead, ø 5,6 mm, length 120 mm   Soapstone lead for marking on metal and steel, welding and cutting up to 2.000 °C with a long lasting white, fireproof line, clearly visible even through welding goggles

  made of durable brass material Set consisting of: 2 pcs lead holder, each with sharpener inside the push button 5 pcs spare leads red allwriter, ø 5,6 mm, length 120 mm 10 pcs spare leads soapstone , ø 5,6 mm, length 120 mm   Red allwriter lead for marking on cold metal, steel and on almost any materials Soapstone lead for marking on metal and steel, welding and cutting up to 2.000 °C with a long lasting white, fireproof line, clearly visible even through welding goggles

  pack with 5 pcs ø 5,6 mm, 120 mm length   for lead holder (article 617144 or 617145)

  pack with 5 pcs ø 5,6 mm, 120 mm length   for lead holder (article 617144 or 617145)

  pack with 5 pcs ø 5,6 mm, 120 mm length   for lead holder (article 617144 or 617145)

Heat-Stik® up to 1200 °C / 2200 °F Marking range: 1800°F to 2200°F (982°C to 1204°C) White-hot surface paint crayon writes on iron, steel castings, ingots, forgings, blooms, billets and high temperature metal alloys Extra-wide hot surface marker lasts longer than competitive hot chalk, for extended writing life Marks are readable even on white-hot steel for instant identification Durable marks will not run, char, flow, discolor, peel or crack   Heat-Stik hot surface solid paint crayons are ideal for use when marking extremely hot steel. The marks will not burn off and remain readable and highly visible in all weather conditions.

marking paste 1000 °C / 1832 °F tube of 50 ml, yellow for permanent marking of metall

  for professional, industrial use For highly opaque marking of almost any materials such as metal, glass, plastic, stone, carton, tiles, wood Waterproof, quick-drying ink

    · Permanent marker and Marker for drill holes combined in one pen · Marker for drill holes tip: extra long (25 mm), thin stainless steel tip with Ø 2 mm for marking drill holes and hard-to-reach areas · Special shaped tip avoids slipping into the steel barrel · Permanent marker tip: round tip 1.5 – 3 mm for marking and writing on almost any material, for example plastic, carton, metal, glass, rubber, wood… · Fadeless, quick drying and waterproof on almost any surfaces · Low smell ink without Xylene / Toluene

  with replaceable carbide tip     The steel-scriber for professional pockets. The slim design ensures optimal handling and easy access to hard-to-reach places. Thanks to the retractable carbide tip, there is no risk of injury when storing it in a jacket or trouser pocket. The hard metal tip can be easily resharpened and should it be too badly worn, we naturally offer replacement refills.   Characteristics: Carbide scriber in the shape of a ballpoint pen with replaceable carbide tip HM marking lead that can be retracted with a push button with retaining clip for jacket or trousers   The company "SCALA" has been developing and producing first-class measuring tools "Made in Germany" for over 75 years.

  for Steel Scriber - ball pen design

  made of C75, open-die forged, hardened, one side straight, one side curved, hardened and ground, Length approx. 200mm   Forged for eternity!   The scriber for every bag and workshop. Filigree, free-form forged, this scriber sits perfectly in the hand. The slim design, which is curved on one side, ensures optimal handling and easy access to hard-to-reach places. Forging and hardening C75 steel makes this scriber very hard and durable and should the point ever become blunt it can be easily resharpened.   Characteristics: hand-forged C75 - hard and resilient nicely balanced curly/straight side   First-class quality from a small German master forge.

  with calibrated melting point The marking melts when the precise temperature grade is reached, this change from a dry to a liquid state indicates the temperature.   Tempilstik is a simple, easy-to-use temperature indicator which is guaranteed accurate to +/- 1% of the rated temperature. It is ideal for a wide range of applications from surface temperature measurement during metal working procedures such as heat treating and welding to the measurement of operating temperatures of bearings or motors.   How to use: Stroke the work piece during heating. When the rated temperature has been reached a distinct melt (smear) will become evident. Tempilstik will make a mark by melting at the point of contact once the surface reaches the specific temperature of the Tempilstik.Note: The color of Tempilstik is for identification only and has no relation to its performance as a temperature indicator.Ranges are available in the Fahrenheit line from 100°F to 2,500°F and 40°C to 1,200°C in the Centigrade line.

  with calibrated melting point, The marking melts when the temperature grade is reached, this change from a dry to a liquid state indicates the temperature.   Set with 5 pens, delivery according to customer specification.   The following temperatures [°C] are available: 79 - 204 - 316 - 400 - 482 - 650 - 680 - 760 - 774 - 816 - 843 - 871 - 900 - 1038 Please specify during ordering process, which temperatures you would like to order.

  strong leather (~ 2 mm) w x h approx. 50 x 65 cm   The models and girls in the pictures are 13 and 11 years old respectively.   Please note: Leather is a natural product. Color and hue are subject to change.   Picture No.3 shows part of the color spectrum of the aprons. If you have a specific color request, please write it in the comment field at the end of the order. We are happy to take this into account - provided we have stock.

  strong leather w x h approx. 70 x 90 cm   Sturdy bib apron with leather neck strap and back closure. Especially practical: 3 sewn-on pockets for pens or small items...   Please note: Leather is a natural product. Color and hue are subject to change.

  standard leather, approx. 80 x 100 cm.   This is a cheap entry-level apron that offers good protection by forging or similar work.

  side splitt cowhide leather approx. 60 x 100 cm, thickness > 1 mm Certified according EN ISO 11611:2015 CLASS 2/A1+A2   Leather is a natural product. Color and hue are subject to change.

  with straps made of German Leather and stable buckles, width x height approx. 82 x 90 cm, 100% cotton.   "German leather" is a very robust fabric made from cotton, it is not leather and is made from 100% cotton. The stable and hard-wearing material has proven itself in guild clothing for decades and is used for clothing that is subject to high wear and tear.   Characteristics: 100% cotton high wear resistance flame retardant pleasant wearing comfort