Characteristics: For clamping chisels and parting tools Ideally suited for sharpening using the tool rest (available as an accessory) Gentle clamping of tools thanks to a brass insert on the clamping surface Accommodates tools up to 50 mm in width

    Characteristics: For sharpening all gouges, tubes, and other tools with complex shapes—such as skew chisels and carbide turning tools The jig can be adjusted to match the shape of the tool, allowing for the creation of a uniform bevel even on rounded cutting edges Compatible with various tool rests on woodturning lathes, enabling turning gouges to be sharpened directly on the machine Also perfectly suited for use with the NTS wet grinding system

  To increase the grain for particularly fine cuts with one side, To roughen again with the other side.

Leather honing disc Ø100 profiled for NTS For removing the insides of rotating tubes and goat feet, Diameter 100 mm.

  for removing grinding burrs after sharpening, Diameter 200mm

  For polishing the workpiece after grinding

  Ø 250 x 50 x 12 mm, Aluminum oxide, K 220

Angle gauge for grindstone Ø250mm to determine the right grinding angle for your tools, for use with sharpening stones with a diameter of 250 mm

Handbellow ø 20 cm, long ash wood, with leather total length approx. 60 cm   Our hand bellows are not a mass product. They are made in a small, traditional manufactory by hand.   All individual parts are made there and, last but not least, like 100 years ago, the leather is nailed to the wood by hand and the metal tip is attached to the head of the bellows.

  with detailed explanation. Printed on high quality paper, dimensions DIN A5 (14,8 x 21 cm).     Must not be missing in any forge! Not only for the hobby blacksmith, but also for schools or professionals, the glow and annealing colors are part of the daily work. With this flyer or poster, these are now always at hand and ready to be seen.     Notice: The A5 size is printed as a "flyer" on high-quality paper, 350g, laminated with foil. Sizes A3 and A2 are printed on sturdy aluminum composite board.     From an order value of €25.00, the "Flyer formats" in size A5 can also be selected as a free bonus at the end of the ordering process.

  pcked in a stable mortar trough 40x70x30 cm   The equipment can be used to produce lettering, jewelry, works of art and small technical parts up to a size of 160x70x70 mm. You will find everything you need in this equipment for the molding of models, metal melting and machining of the casting.   set consists of:   moulding box 100x200x100 mm letters A-Z 25 mm sheet 300x200x2,5 mm as mat special moulding sand, oil-bonded 25 kg coal-shovel with wooden handle hand broom wooden tamper square bar 12 mm for stripping paintbrush ø 25 mm talc powder, 500 g model 40 mm eyebolt 30x10 spoon lancet L6 c-clamp 160 mm soft-head hammer 32 mm gaz stove casting spoon 60 mm with wooden handle side cutter 180 mm engineers pliers 180 mm metal saw needle files, set of 6 abrasive paper 40-80-240 brass wire brush blacksmith glove L (Size 9) protection goggles tin (Sn 99,9) book: Die Metallgiesswerkstatt (in German) toolbox mortar trough

  made from Kevlar® / Paraaramid up to 350 °C contact heat, very resistant, approx. 30cm total length

 for Manual Operation Two-piece, cast iron, without fire tongue Air inlet diameter at the inlet pipe: 55 mm Distance between screw holes for fan: Distance between screw holes for bowl: 125 mm Fire bowl dimensions: Outer dimensions: 260 x 240 mm, inside diameter: 220 x 20 mm, depth: 68 mm   Original price in 1991 at Gebrüder Häfliger AG: CHF 375   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.

  cast iron, without fire tongue Outer dimensions: 260 x 240 mm, inside diameter: 220 x 20 mm, depth: 68 mm   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.

Fire Pan for Field Forge Insert No. 15 cast iron, Outer dimensions: 250 x 225 mm, inside dimension: 210 x 190 mm, depth: 68 mm   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.

  cast iron, without fire tongue Air inlet diameter: 90 mm Screw hole spacing: 125 mm   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.

  cast iron   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.

  for connecting the electric fan EMV 133   Picture 2 shows the adapter mounted on the iron type 15 (iron not included)   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.

  Two-piece, cast iron, with fire tongue Air inlet diameter: 95x95 mm Screw hole spacing: 155 mm Fire bowl dimensions: Outer dimensions: 275 x 235 mm, inside dimension: 240 x 200 mm, depth: 70 mm   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.

  cast iron, Outer dimensions: 275 x 235 mm, inside dimension: 240 x 200 mm, depth: 70 mm Distance screw holes 155 mm,   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.

  cast iron, Air inlet diameter: 95x95 mm Screw hole spacing: 155 mm   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.

  Two-piece, cast iron, valve with handle, body with flange and socket, the latter for inserting a 2" pipe.   Note: The parts are raw castings as shown. The flange is not drilled, and the valve must be adjusted/milled to fit neatly into the body.   Original price in 1991 at Gebrüder Häfliger AG: CHF 248   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.

  Two-piece, cast iron, valve with handle, body with flange and socket, the latter for inserting a 2½" pipe   Note: The parts are raw castings as shown. The flange is not drilled, and the valve must be adjusted/milled to fit neatly into the body.   Original price in 1991 at Gebrüder Häfliger AG: CHF 268   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.

  Made of cast iron, with Outer Dieameter ø 135 mm flange and 2 x 75 mm ID sockets, the latter for inserting a 2.5" pipe.   Original price in 1991 from Gebrüder Häfliger AG (with 2 air valves and pipe sections): CHF 784   This item originates from a company liquidation and has been "sleeping" for decades in dry storage. It is new, but some parts naturally show some signs of storage. We are selling this item on clearance while stocks last  returns or exchanges are not possible.   The parts are cast and have certain tolerances. Therefore, reworking may be necessary.